• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 D
• /
• pp.2013-2014
• /
• 2006

For large capacity optical CDMA networks, we propose a shared-type encoder/decoder based on an tunable wavelength conveter (TWC) and an arrayed waveguide grating (AWG) router. Feasibility of the structure of the proposed encoder/decoder for dynamic code allocation is tested through simulations using three types of wavelength/time 2-D codes, which are the generalized multi-wavelength prime code(GMWPC), the generalized multi-wavelength Reed-Solomon code(GMWRSC) and the matrix code. Test results show that the proposed encoder/decoder can increase the channel efficiency not only by increasing the number of simultaneous users without any multiple-access interference but by using a relatively short length CDMA codes.

• Journal of Advanced Marine Engineering and Technology
• /
• 제34권5호
• /
• pp.638-644
• /
• 2010

사각 덕트내 열전달과 유동 양상을 조사하기 위해 꼬임식 테이프 만 설치한 경우와 꼬임식 테이프와 리브(rib)를 설치한 경우에 대해 충분히 발달된 난류유동에 관한 수치 해석을 행하였다. 수치 해석에서는 레이놀즈 수가 8,900에서 29,000 범위의 난류 스월유동, 채널수력직경에 대한 리브의 높이(e/$D_h$)가 0.067, 그리고 채널 수력 직경에 대한 시험부 길이(L/$D_h$)가 30인 경우에 대해 고려하였다. 리브는 채널 바닥면에 만 길이 방향으로 설치하였다. 꼬임식 테이프는 0.1 mm 두께의 탄소강 판 재질이며, 폭은 28 mm, 길이는 900 mm이고 2.5 번 회전시켰다. 각 벽면은 서로 단열된 알루미늄 판으로 구성되었다. 2가지의 가열 조건에 대해 조사 하였다: (1) 사각 전체 벽 면적에 일정한 열유속으로 가열, 그리고 (2) 사각 채널에서 마주보는 상하 양면 만 가열. 연구 결과 상하 양면 만 가열하는 경우가 4면 모두 가열하는 경우보다 열전달 계수가 우수하였고 꼬임식 테이프와 리브를 설치한 경우 열전달 계수가 현저히 향상되었다.

• 경영과학
• /
• 제28권1호
• /
• pp.43-52
• /
• 2011

The basic objective of broadcast scheduling is to get the smallest length TDMA frame, where many nodes are allowed to transmit simultaneously in a single time slot in a conflict-free manner. The secondary objective is to maximize the number of such transmissions for maximum use of the channel. An Artificial Bee Colony (ABC) with ranking strategy is proposed in this paper for the broadcast scheduling problem. Our proposed method is very efficient for generating initial and neighbor feasible solutions. We can get the best number of time slots and transmission utilization comparing to previous researches.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.105-106
• /
• 2005

The impact ionization MOS (I-MOS) transistor with 50nm channel length is presented by using 2-D device simulator ISE-TCAD. The subthreshold slope cannot be steeper than kT/q since the subthreshold conduction is due to diffusion current. As MOSFETs are scaled down, this problem becomes significant and the subthreshold slope degrades which leads an increase in the off-current and off-state power dissipation. The I-MOS is based on a gated p-i-n structure and the subthreshold conduction is induced by impact ionization. The simulation results show that the subthreshold slope is 11.7 mV/dec and this indicates the I-MOS improves the switching speed and off-state characteristics.

• 한국수자원학회논문집
• /
• 제32권5호
• /
• pp.565-577
• /
• 1999

프랙탈 기하학은 불규칙적이고 복잡한 자연 현상을 수학적으로 나타낼 수 있는 방법을 제시해 줄 수 있으며, 자기상사성을 가지고 있는 하천의 형상을 비롯한 하도망의 구성은 프랙탈 차원을 가지고 있는 프랙탈 현상이라 할 수 있다. GIUH란 유역의 수문학적 응답인 IUH에 하천의 지형학적인 특성을 적용한 강우-유출 모형으로, Horton의 차수비를 이용하여 지형학적인 특성을 반영할 수 있으며 하천 유역에서 프랙탈 차원은 길이비, 면적비, 분기비 등 Horton의 차수비를 이용하여 산정할수 있다. 프랙탈 GIUH 모형을 제시하였다. 프랙탈 GIUH 모형은 Rosso(1984)가 제시한 GIUH-Nash 모형의 형상계수와 규모계수 등의 매개변수 산정시 유역의 자기상사성을 대변할 수 있는 프랙탈 차원을 직접 적용하였으며, 하천의 길이비와 분기비 만의 함수로 나타내었다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권6호
• /
• pp.229-235
• /
• 2002

This paper presents the fabrication of polycrystalline thin film transistor(TFT) using sequential lateral solidification(SLS) of amorphous silicon. The fabricated SLS TFT showed high Performance suitable for active matrix liquid crystal display(AMLCD). The SLS process involves (1) a complete melting of selected area via irradiation through a patterned mask, and (2) a precisely controlled pulse translation of the sample with respect to the mask over a distance shorter than the super lateral growth(SLG) distance so that lateral growth extended over a number of iterative steps. The SLS experiment was performed with 550$\AA$ a-Si using 308nm XeCl laser having $2\mu\textrm{m}$ width. Irradiated laser energy density is 310mJ/$\textrm{cm}^2$ and pulse duration time was 25ns. The translation distance was 0.6$\mu$m/pulse, 0.8$\mu$m/pulse respectively. As a result, a directly solidified grain was obtained. Thin film transistors (TFTs) were fabricated on the poly-Si film made by SLS process. The characteristics of fabricated SLS p -type poly-Si TFT device with 2$\mu\textrm{m}$ channel width and 2$\mu\textrm{m}$ channel length showed the mobility of 115.5$\textrm{cm}^2$/V.s, the threshold voltage of -1.78V, subthreshold slope of 0.29V/dec, $I_{off}$ current of 7$\times$10$^{-l4}$A at $V_{DS}$ =-0.1V and $I_{on}$ / $I_{off}$ ratio of 2.4$\times$10$^{7}$ at $V_{DS}$ =-0.1V. As a result, SLS TFT showed superior characteristics to conventional poly-Si TFTs with identical geometry.y.y.y.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권2호
• /
• pp.172-178
• /
• 2016

In this paper, we propose a sub-10 nm Ge/GaAs heterojunction-based tunneling field-effect transistor (TFET) with vertical band-to-band tunneling (BBT) operation for ultra-low-power (LP) applications. We design a stack structure that is based on the Ge/GaAs heterojunction to realize the vertical BBT operation. The use of vertical BBT operations in devices results in excellent subthreshold characteristics with a reduction in the drain-induced barrier thinning (DIBT) phenomenon. The proposed device with a channel length ($L_{ch}$) of 5 nm exhibits outstanding LP performance with a subthreshold swing (S) of 29.1 mV/dec and an off-state current ($I_{off}$) of $1.12{\times}10^{-11}A/{\mu}m$. In addition, the use of the highk spacer dielectric $HfO_2$ improves the on-state current ($I_{on}$) with an intrinsic delay time (${\tau}$) because of a higher fringing field. We demonstrate a sub-10 nm LP switching device that realizes a good S and lower $I_{off}$ at a lower supply voltage ($V_{DD}$) of 0.2 V.

• 한국농공학회논문집
• /
• 제62권6호
• /
• pp.111-118
• /
• 2020

This study developed a rainwater harvesting system for the irrigation of upland on sloping area. The assessment of water supply capacity was evaluated in farm field experience. This system consists of a water catchment device and a collapsible storage tank. The water catchment device was designed to collect runoff water in natural channel of 500 mm width into a pipe of 50 mm inner diameter. The device has funnel-shaped plan and cross-section of square. The storage capacity of the collapsible water tank was caculated to meet the water demand for irrigation in 30 a cultivated land for 10-year frequancy drought. The tank has a cuboid shape with a capacity of 30 ㎥, 5 m in width and length, 1.2 m in height. This system can supply 92% of the water required for drop irrigation of red pepper and 88% of the water required for drop irrigation of onions in 30 a cultivation land during the month of May and June. In the case of 16-dry days of 10-years frequency, this system is capable to irrigate 100% of required water for red pepper and onion, 76.7% of required water for Omija (Schisandra chinensis), and 51.5% of required water for autumn kimchi cabbage.

• 한국농공학회지
• /
• 제18권4호
• /
• pp.4218-4225
• /
• 1976

To insure the safety of the drainage sluice, topogrophical change due to erosion as well as capability of discharging the design flow in a very important factor. In consideration of the fact that the drainage sluice is built in the sea, its construction has many topographically restricted problems and naturally requires a completeness of research and experiment. This thesis is a comparative and analytic study of discharging flow acting on the erosion at the bottom of the structure on the basis of the measured velocity on the downstream channel of the drainage sluice. (1) The measured velocity shows a little higher values than the computed velocity, because the measured velocity was observed at the surface of the stream. There fore, it is reasonable that the compated velocity should be taken in this study. (2) The field observation was conducted to have the measurement of the flow velocity without surveying the area of flow. Therefore, the coefficient of discharge could not be computed. The survey of the area of flow is planned to be conducted along with the measurement of the flow velocity. (3) The apron of the drainage sluice is free discharging type and it was designed to be about 80m in length less than it should be. (4) The apron of free flow discharging type should have a solid foundation to protect the structure by preventing erosion damage to upstream and downstream channels against weathering of rock and strong torrent. Whether free flow discharging type or energy-dissipating type is best chosen depends on the topographical condition of the forage site, therefore, there would be a comparative study before the final decision was made about the protrection for the structure. (5) It is considered to be appropriate that the design and construction of the drainage sluice should have a complete study which is based on hydraulie model test before the type of protection is decided. (6) It is much requested that a variety of experiment equipments be installed and observed to study the protection for the drainage sluice.

• Journal of Korean Neurosurgical Society
• /
• 제53권2호
• /
• pp.65-71
• /
• 2013

Objective : In order to develop a novel nerve guidance channel using porcine small intestinal submucosa (SIS) for nerve regeneration, we investigated the possibility of SIS, a tissue consisting of acellular collagen material without cellular immunogenicity, and containing many kinds of growth factors, as a natural material with a new bioactive functionality. Methods : Left sciatic nerves were cut 5 mm in length, in 14 Sprague-Dawley rats. Grafts between the cut nerve ends were performed with a silicone tube (Silicon group, n=7) and rolled porcine SIS (SIS group, n=7). All rats underwent a motor function test and an electromyography (EMG) study on 4 and 10 weeks after grafting. After last EMG studies, the grafts, including proximal and distal nerve segments, were retrieved for histological analysis. Results : Foot ulcers, due to hypesthesia, were fewer in SIS group than in Silicon group. The run time tests for motor function study were 2.67 seconds in Silicon group and 5.92 seconds in SIS group. Rats in SIS group showed a better EMG response for distal motor latency and amplitude than in Silicon group. Histologically, all grafts contained some axons and myelination. However, the number of axons and the degree of myelination were significantly higher in SIS group than Silicon group. Conclusion : These results show that the porcine SIS was an excellent option as a natural biomaterial for peripheral nerve regeneration since this material contains many kinds of nerve growth factors. Furthermore, it could be used as a biocompatible barrier covering neural tissue.