• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2000.04a
• /
• pp.220-226
• /
• 2000

In this paper, a primitive study of yacht is carried out and an attempt to design a typical yacht is pursuited. General characteristics and types of a yacht is examined and the 1st step to design process is outlined. A model ship of an environmental adaptive yacht is presented and principal dimensions of the yacht is decided.

• Proceedings of KOSOMES biannual meeting
• /
• 2007.11a
• /
• pp.121-124
• /
• 2007

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2016.05a
• /
• pp.98-99
• /
• 2016

The aim of study is to develop a dual driven ship berthing/deberthing system with $360^{\circ}$ steerability. A large ship used bow thruster, side thruster and pod propulsor etc. when approaching to a pier. But as marine leisure boats become large-scaled, the number of accidents is recently increasing what caused a ship to crash into a ship and a ship to crash into mooring facilities during berthing/deberthing on a marina. To solve the problem, the control responsiveness of a joystick connected with two motors and a propeller was checked and torque was increased by the electromagnetic design of magnetic gear. A sea trial test was carried out to investigate a performance of the developed system in the real sea.

• Journal of the Society of Naval Architects of Korea
• /
• v.51 no.6
• /
• pp.548-555
• /
• 2014

As a considerable, experimental approach, an Auto-carriage type of $CO_2$ welding machine and a MIG(Metal Inert Gas) welding robot under inert gas atmosphere were utilized in order to realize Al 5083 welding applied to hull and relevant components of green Al leisure ships. This study aims at investigating the effect of welding conditions(current, voltage, welding speed, etc) on thermal deformation that occurs as welding operation and tensile characteristics after welding, by using Al 5083, non-ferrous material, applied to manufacturing of co-environmental Al leisure ships. With respect to welding condition to minimize the thermal deformation, 150A and 16V at the wire-feed rate of 6mm/sec were acquired in the process of welding Al 5083 through an auto carriage type of $CO_2$ welding feeder. As to tensile characteristics of Al 5083 welding through a MIG welding robot, most of tensile specimens showed the fracture behavior on HAZ(Heat Affected Zone) located at the area joined with weld metal, except for some cases. Especially, for the case of the Al specimen with 5mm thickness, 284.62MPa of tensile strength and 11.41% of elongation were obtained as an actual allowable tensile stress-strain value. Mostly, after acquiring the optimum welding condition, the relevant welding data and technical requirements might be provided for actual welding operation site and welding procedure specification(WPS).

• Journal of the Society of Naval Architects of Korea
• /
• v.42 no.6 s.144
• /
• pp.666-672
• /
• 2005

Reduction of a ship's rolling is the most important performance requirement for improving the safety of the crew on board and preventing damage to cargos as well as improving the comfort of the ride. A mass driving anti-rolling system (MO-ARS) might be one candidate of several systems against the ship's rolling. In this paper, three types of MD-ARS, two passive and one active devices, are developed for small ships. After they are installed on the cabin of the small leisure boat, respectively, a series of performance test is conducted before and after operating them. Through the test, it is confirmed that the roll responses of the ship are pretty well reduced by the MO-ARS.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.5
• /
• pp.843-851
• /
• 2022

This paper was conducted to study the conditions for the manufacture and operation of artificial snow removal and ice-making test facilities so that the test equipment can be tested in a low-temperature environment using the polar environment performance test facility. The polar environment performance test Facility is designed to artificially simulate extreme environments up to -65 ℃, and is a mid-to-large low-temperature environment test facility that can perform performance tests on offshore plant equipment, ships, leisure, and offshore structures. To verify the safety of deck work of ships operating in polar environments, artificial snow removal and artificial ice making devices were manufactured, and we conducted research on various operating environments using these facilities. For the efficient operation of artificial snow and ice making facilities, it is important to continuously supply dry air, and it has been found that installing an additional heater at the tip of the nozzle is effective in preventing freezing.

• Proceedings of KOSOMES biannual meeting
• /
• 2005.05a
• /
• pp.155-159
• /
• 2005

Analysis target ship is not introduced yet in domestic as steel yacht that is getting into the spotlight by leisure life in Australia or Japan. Sailing yacht or Yacht for leisure time made of FRP into controlling power fare mainly and the design and made of latest fishing boat and something of domestic is consisting mainly. To need investigated for concept is various kinds overall strength as that use mainly steel wire material structurally of steel yacht by small crafts about Longi strength, Transe strength portion even of design safety factor at subject to do Rule's allowable stress enough stable structure accomplish. But it is assessment of part intensity that become refer to most in small size ship.

• Korean Institute of Interior Design Journal
• /
• v.19 no.1
• /
• pp.226-235
• /
• 2010

As marine leisure is getting popular around the world, people's interest in cruise ship is increasing rapidly. Now it became possible to make cruise ship with Korean technology, as a result of continuous research and development. However, as cruise ships are getting bigger and more popular, new cruise interior design is required to satisfy various clients' aesthetic and functional demands. Therefore, more researches for cruise interior design are needed. The purpose of this study is to analyze the characteristics of planning and design of passenger's cabins in cruise ship. The scope of this research is limited to the types in the 2004-2010 in Large Cruise Ships. Method of this study are document study and case study, in particularly, case study is conducted for the specific design methods through case analysis. The results of this study are as follow : One of the transitions in the cruise cabin designs is that cabins with balconies occupy a large portion of the entire cabins. As the functions of these balconies are diversifying, more distinctive forms of balcony are showing up. In particular, the cabins which are connected to public space differentiate themselves from those with the same rates; it meets the demands of the clients who require high quality services. In terms of cabin design, a futuristic, distinctive cabin that has incorporated will be a very important function in determining the value of the cruise ship. Based on the results of this research, application of the rapid changes in cabin design and studies about more diversified and advanced design are required.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.3
• /
• pp.261-267
• /
• 2015

A support system which allows operator to check the condition of a vessel and to warn the sea risk in order to prevent accidents of leisure boats, is required. Therefore, this paper proposes a navigational safety support system to ensure the safety of vessels by monitoring and managing the status of those ships. In developing a system process, each developed equipment is integrated and verified whether the functional, compositional and operational algorithms are working properly according to the designed object.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.5
• /
• pp.577-585
• /
• 2015

This paper deals with development of an autopilot system for leisure yacht based on NMEA 2000 network and android platform. The developed system can operate both for manual steering and automatic navigation mode. In automatic steering mode, after manipulation of commands which are NMEA 0183 sentences by android platform, the developed system translates and sends the packets through NMEA 2000 network. Then the controller which is connected to NMEA 2000 network receives the commands and controls the boat's rudder system automatically. The automatic steering mode is achieved by cooperation of two controllers; one for controlling the rudder system, and the other for controlling the vessel's heading. To control the vessel's rudder and heading angle two PID controllers are developed with an adjustable dead-band gain. Also, in order to eliminate the steady-state error occurred by applying dead-band, an integral controller which specifically supervises the system's behavior inside the dead-band area is developed. In this paper, at the first stage, simulations are accomplished using computer in order to examine the feasibility of the proposed based on simulation results. In the next step, the system on a real hydraulic steering model is implemented and at the end the performance examination by implementing it on a real boat and doing test navigation is executed.