• Asian-Australasian Journal of Animal Sciences
• /
• 제25권1호
• /
• pp.59-65
• /
• 2012

The present study was conducted to determine the best level of substitution of soybean meal by sunflower cake in diets for kids through the evaluation of quantitative carcass traits. Thirty-two Boer kids X 1/2 NDB (no defined breed), males, non-castrated, with 4 months of age and initial body weight of $15{\pm}3.2$ kg, were randomly assigned to individual pens. The treatments contained four substitution levels of soybean meal by sunflower cake (0, 33, 66 and 100% DM). At the end of the experimental period, the animals were slaughtered. There was no influence of the treatments on any of the mean values of the evaluated measures (p>0.05): 21.78 kg (body weight at slaughter), 8.65 kg (hot carcass weight), 8.59 kg (cold carcass weight), 40.27% (hot carcass yield), 39.20% (cold carcass yield), 7.73 $cm^2$ (rib eye area), 46.74 cm (carcass outer length), 45.68 cm (carcass internal length), 36.92 cm (leg length), 26.04 cm (leg perimeter), 48.66 cm (hind perimeter), 58.62 cm (thoracic perimeter), 0.20 (carcass compactness index), 68.48% (total muscle of the leg), 2.79% (total leg fat), 55.19% (subcutaneous leg fat), 28.82% (total bone), 81.66 g (femur weight), 14.88 cm (femur length), 0.38 (leg muscularity index), 2.53 (muscle:bone ratio) and 33.42 (muscle:fat ratio). The substitution of soybean meal by sunflower cake may be recommended up to a level of 100% without alterations to quantitative carcass traits.

• 대한추나의학회지
• /
• 제5권1호
• /
• pp.135-139
• /
• 2004

Objectives : The objectives of this report is to introduce PTA. Methods : The examination of the leg length inequality gives us a useful tool for diagnosis of body imbalance. especially pelvic distortion. There are four steps in the process of the leg analysis, according to "The Standard Manual of Chuna Society (2nd ed., Seoul:KCA Press. 2001)". In the last step of the analysis, knee-flexing over $90^{\circ}$, we have often experienced a specific sign that the lower legs are attracted toward one side spontaneously. The authors call it 'Lower Leg Lateral Attraction'. This is a very significant sign that gives us which is the major part between pelvis and the upper parts over sacrum. Thus it is definded as "Pelvic Twist Analysis, PTA" by the authors. With PTA, first, you must check the side of short leg and next, check the side of lateral attraction in lower leg over-flexing. If both sides coincide with each other, then the major part you can correct first is pelvic distortion. If not, you must find another part for primary correction, instead of pelvis. Conclusions : PTA becomes a useful complement to the examination of the leg length inequality.

• 한국운동역학회지
• /
• 제26권2호
• /
• pp.221-228
• /
• 2016

Objective: The purpose of this study was to investigate differences in gait parameters and symmetry between walking speed by using the Froude number and preferred walking speed. Method: Fifty adults (age: $21.0{\pm}1.7years$, body weight: $71.0{\pm}9.2kg$, height: $1.75{\pm}0.07m$, leg length: $0.89{\pm}0.05m$) participated in this study. Leg length-applied walking speed was calculated by using the Froude number, defined as Fr = ${\upsilon}^2$/gL, where v is the velocity, g is the gravitational acceleration, and L is the leg length. Video data were collected by using eight infrared cameras (Oqus 300, Qualysis, Sweden) and the Qualisys Track Manager software (Qualisys, Sweden), with a 200-Hz sampling frequency during two-speed walking (preferred walking speed [PS] and leg length-applied walking speed [LS]) on a treadmill (Instrumented Treadmill, Bertec, USA). The step length, stride length, support percentage, cadence, lower joint angle, range of motion (ROM), and symmetry index were then calculated by using the Matlab R2009a software. Results: Step and stride lengths were greater in LS than in PS (p < 0.05). The right single-support percentage was greater in LS than in PS (p < 0.05). The hip joint angle at heel contact and toe-off were greater in LS than in PS (p < 0.05). The hip and knee joint ROM were greater in LS than in PS (p < 0.05). Conclusion: Based on our findings, we suggest that increased walking speed had a significant effect on step length, stride length, support percentage, and lower joint ROM.

• Journal of Welding and Joining
• /
• 제16권5호
• /
• pp.134-141
• /
• 1998

In this study, a fillet size for bending fatigue strength of one side fillet welded T-joint, used in box type girder and other welding structure, was investigated by bending fatigue test with or without edge preparation and burn through, with variation of joint shape. As a result, the following conclusions were obtained. (1) In one side fillet welded T-joint, the larger the leg length, the greater the bending fatigue strength. The increase in bending fatigue strength. (2) One side filet welded T-joint with edge preparation showed higher bending fatigue strength than that with twofold-large leg length and without edge preparation. (3) In one side fillet welded T-joint without edge preparation, both manual welding and automatic welding were carried out with same condition. In this case, automatic welding shoed deeper penetration and more increased horizontal leg length than manual welding, so that automatic welding offers grater bending fatigue strength. (4) For one side fillet welded T-joint without edge preparation, the ratio(h/t) of the leg length (h) and the main plate thickness (t) in which toe crack can occur was 1.2 over. (5) In one side fillet welded T-joint with edge preparation, the burn through led to reduced bending fatigue strength. However, this bending fatigue strength was higher than that of one side fillet welded T-joint without edge preparation and with a larger leg length.

• 대한물리의학회지
• /
• 제2권2호
• /
• pp.183-194
• /
• 2007

Purpose : The purpose of this study was to evaluate influence of therapeutic exercise on functional leg length inequality(LLI). Methods : The subjects were consisted of thirty patients who had Leg length inequality(LLI) of more than 10mm(l6 females. 14 males) from 20 to 35 years of age(mean aged 24.23). All subjects randomly assigned to contract-relax exercise of proprioceptive neuromuscular facilitation(PNF) group(n=15), control group(n=15). Contract-relax exercise group received contract-relax exercise about 10 minutes with therapeutic massage about 15 minutes for 3 times per week during 4 weeks period. Control group not received intervention during 4 weeks period. The tape measure method(TMM) was used to measure functional Leg length inequality. Biodex System 3 Pro was used to measure strength of Knee extension & flexion. All measurements of each subjects were measured at pre-test, 2weeks post-test and 4weeks post-test. Results : 1. The LLI of contract-relax exercise group was significantly reduced according to within treatment period(p<.05), most significantly reduced between pre-test and post-test(p<.05). Contract-relax exercise group significantly more reduced than control group(p<.05). 2. The knee extension strength of contract-relax exercise group was significantly increased according to within treatment period(p<.05), most significantly increased between pre-test and post-test(p<.05). Contract-relax exercise group significantly more increased than control group(p<.05). 3. The knee flexion strength of contract-relax exercise group was significantly increased according to within treatment period(p<.05), most significantly increased between pre-test and post-test(p<.05). Contract-relax exercise group significantly more increased than control group(p<.05). Conclusion : Contract-relax exercise applied with therapeutic massage can reduce LLI and increased lower extremity muscle strength.

• 한국생활과학회지
• /
• 제24권4호
• /
• pp.555-569
• /
• 2015

During a design process of a protective equipment for sports activities, minimizing movement restrictions is important for enhancing its functions particularly for protection. This study presents a three-dimensional(3D) modeling methodology for designing baseball catcher's leg guards that will allow maximum possible performance, while providing necessary protection. 3D scanning is performed on three positions frequently used by a catcher during the course of a game by putting markings on the subject's legs at 3cm intervals : a standing, a half squat with knees bent to 90 degrees and 120 degrees of knee flexion. Using data obtained from the 3D scan, we analyzed the changes in skin length, radii of curvatures, and cross-sectional shapes, depending on the degree of knee flexion. The results of the analysis were used to decide an on the ideal segmentation of the leg guards by modeling posture. Knee flexions to 90 degrees and to $120^{\circ}$ induced lengthwise extensions than a standing. In particular, the vertical length from the center of the leg increases to a substantially higher degree when compared to those increased from the inner and the outer side of the leg. The degree of extension is varied by positions. Therefore, the leg guards are segmented at points where the rate of increase changed. It resulted in a three-part segmentation of the leg guards at the thigh, the knee, and the shin. Since the 120 degree knee-flexion posture can accommodate other positions as well, the related 3D data are used for modeling Leg Guard (A) with the loft method. At the same time, Leg Guard (B) was modeled with two-part segmentation without separating the knee and the shin as in existing products. A biomechanical analysis of the new design is performed by simulating a 3D dynamic analysis. The analysis revealed that the three-part type (A) leg guards required less energy from the human body than the two-part type (B).

• 한국축산식품학회지
• /
• 제31권5호
• /
• pp.676-683
• /
• 2011

The aim of this study was to compare the physicochemical changes of hot-boned chicken breast and leg muscles. Chicken breast and leg muscles from 56 broilers were excised within a 15 min post-mortem (PM) and stored at $20^{\circ}C$. Physicochemical traits were determined at 0.5, 6, 12, and 24 h PM. The ultimate pH of leg muscle was higher than that of breast muscle (p<0.05). The content of glycogen in the breast muscle was relatively higher than that in the leg muscle until 6 h PM (p<0.05). R-values showing rigor mortis of breast and leg muscles were completed after or before 6 h PM. Breast muscle had less cooking loss than leg muscle (p<0.05). Drip loss did not significantly differ between breast and leg muscles with the exception of that at 6 h PM. The sarcomere length of leg muscle was relatively longer than that of breast muscle (p<0.05). The MFI of leg muscle was significantly lower than that of breast muscle (p<0.05). The shear force of leg muscle was lower than that of breast muscle at 6 and 12 h PM (p<0.05); however, that of both muscles did not significantly differ at 24 h PM.

• Animal Bioscience
• /
• 제36권9호
• /
• pp.1393-1402
• /
• 2023

Objective: In this study effects of three types of beddings on broiler leg health and bone biomechanics were evaluated. Methods: A total of 504 male chicks (Ross 308) were randomly placed on three beddings (4 replicates/group; 42 birds/pen), zeolite-added litter (ZL), plastic-grid flooring (PF), and wood shavings (WS). On day 42, chickens were weighed, slaughtered, and samples (bone, muscle, and drumstick) were collected. Bones were subjected to leg health tests, morphometric measurements, biomechanical testing, and ash analysis. Results: Broilers in PF and WS groups showed higher live weight than the ZL group (p<0.001), and the incidence of tibial dyschondroplasia (TD) and varus valgus deformity due to distal bending was significantly higher in PF (p<0.001). Multinomial logistic regression showed that bedding has a significant (p = 0.038) contribution toward the development of TD. Tibial strength (p = 0.040), drumstick width (p = 0.001), and total femur and epiphyseal ash contents (p = 0.044, 0.016) were higher in the ZL group. Chicken live weight was correlated with tibial length and weight (r = 0.762, 0.725). Conclusion: Flooring and the type of bedding material directly affect broiler bone length, strength and leg health. Plastic bedding improves the slaughter weight of chickens on the expense of leg deformities, and zeolite litter improves leg health and bone strength.

• 한국의류학회지
• /
• 제17권4호
• /
• pp.608-621
• /
• 1993

The Purposes of this study were 1)to find the body surface total line and segment line significantly(${\alpha}$=0.05) changed by the leg movement including all movement direction of hip joint, knee joint and ankle joint for the more functional clothing. 2)to classify them into 3 types-expansion type, contraction type, expansion & contraction type, and 3)to identify the characteristics of the body surface length changes. 10 Crosswise and 5 lengthwise body surface total lines and 48 crosswise & 39 lengthwise body surface segment lines of 26 female college students aged from 18 to 24 years were measured directly on the body surface and were analyzed by ANOVA & Multiple Comparison Test (Tukey). The results were as following : Body surface total lines significantly changed were all the body surface total lines except abdoman girth, 1/2thigh girth of lower leg and ankle girth, and these were classified into 3 types : Center front leg line belonged to expansion & contraction type, whereas lateral leg line, legscye girth, and total crotch length belonged to contraction type. The rest belonged to expansion type. Knee girth showed maximum expansion, whereas center front leg line showed maximum contraction. Body surface total lines have shown large expansion crosswise whereas lengthwise they have mainly shown contraction. At least more than one component segment line of each body surface total lines except abdoman girth and ankle girth have shown significant change. Top segment of inner leg line showed maximum expansion. whereas just below top segment of center front leg line showed maximum contraction. Crosswise all the body surface segment lines have shown expansion except inner back segments of thigh girth and 1/2thigh girth of upper leg which have shown contraction. Lengthwise they have shown both expansion and contraction according to the location of front or back, and below or upper 1/2thigh girth line except the component segment lines of lateral leg line, which has shown contraction only.(cf. figure 2. figure 3. and table 2-2).

• 한국기계가공학회지
• /
• 제15권3호
• /
• pp.58-65
• /
• 2016

This study analyzed the structural weld strength for a door hinge for a field artillery ammunition support vehicle. In order to determine the optimal conditions, we measured the modal analysis and analyzed the leg length of a rear door hinge. From these methods, we acquired the vibration frequency of normal mode and the optimal welding leg length conditions. It was possible to obtain a structural stability for a rear door hinge of the field artillery ammunition support vehicle. In the future, this should be used as a reference source for the weld strength analysis of high vibration and high weight structures for another welding system design.