• Clinical and Experimental Reproductive Medicine
• /
• v.24 no.3
• /
• pp.281-292
• /
• 1997

The objective of this study was to compare retrospectively the survival and pregnancy rates(PR) of cryopresered-thawed embryos obtained from intracytoplasmic sperm injection (ICSI) or conventional in vitro fertilization (IVF). Ninety-six cycles of cryopresered-thawed embryo transfer (ET) were performed in 79 patients from June, 1996 to September, 1997 and grouped as followings: 20 cycles (16 patients) inseminated by ICSI (ICSI Group) and 76 cycles (63 patients) by conventional IVF (IVF Group). Slow-freezing and rapid-thawing protocol was used with 1.5M propanediol (PROH) and 0.1M sucrose as cryoprotectant. All embryos were frozen-thawed at the two pronuclear (2 PN) stage excluding four cycles in which the early cleavage stage embryos were frozen, and allowed to cleave in vitro for one day before ET. The duration from freezing to thawing was comparable in both groups ($mean{\pm}SD$, $112.1{\pm}80.0$ vs. $124.8{\pm}140.1$ days). The age of female ($31.2{\pm}3.4$ vs. $32.6{\pm}3.3$ years) and the endometrial thickness prior to progesterone injection ($9.4{\pm}2.0$ vs. $9.3{\pm}1.8$ mm) were also comparable in both groups. There was no significant difference in the outcomes of cryopreserved-thawed ET between two groups: survival rate ($85.2{\pm}16.1%$ vs. $82.2{\pm}19.7%$), cleavage rate ($96.9{\pm}6.7%$ vs. $94.7{\pm}13.0%$), cumulative embryo score (CES, $54.5{\pm}31.1$ vs. $49.0{\pm}20.0$), preclinical loss rate (5.0% vs. 5.3%), clinical miscarriage rate (0% vs 29.4%), clinical PR per transfer (35.0% vs. 22.4%), implantation rate (9.9% vs. 5.6%), and multifetal PR (42.9% vs. 17.6%). In conclusion, human embryos resulting from ICSI can be cryopreserved-thawed and transferred successfully, and the survival rate and PR are comparable to conventional IVF.

• Clinical and Experimental Reproductive Medicine
• /
• v.34 no.4
• /
• pp.285-291
• /
• 2007

Objective: To evaluate the outcomes of in vitro fertilization and embryo transfer (IVF-ET) in women over 40 years of age. Methods: A total of 170 patients (271 cycles) over 40 years of age who underwent IVF-ET at Seoul Women's Hospital (Incheon, Korea) were analyzed in this study retrospectively. The patients were grouped into the women <44 years old group and the women $\geq$44 years old group. Statistical analysis was performed using Student's t-test and Fisher's exact test as appropriate. Results: An overall clinical pregnancy rate per retrieval was 11% (30/271). Of these, clinical miscarriage rate were 33% (10/30) and the overall delivery rate was 7.4% (20/271) per retrieval, respectively. The women $\geq$44 years old group had significantly higher cancellation rate (13% vs. 25%), lower number of retrieved oocytes (6.17$\times$4.62 vs. 4.13$\times$4.07), decreased number of 2PN (4.83$\times$3.61 vs. 3.46$\times$3.12), and reduced embryos for transfer (3.52$\times$1.72 vs. 2.81$\times$1.83) than the women <44 years old group. We found significantly lower clinical pregnancy rate (13.0% vs. 2.1%) and live birth rate (9.0% vs. 0.0%) in the women $\geq$44 years old group than the women <44 years old group. Conclusion: The present study has shown that IVF outcome is seriously impaired in the women $\geq$44 years old.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.5
• /
• pp.491-503
• /
• 2014

This study was performed to investigate the community structure and health assessment of macrobenthic assemblages in Garorim Bay, West Coast of Korea. Macrobenthos were collected by van Veen grab sampler at May(spring) and July(summer) 2012. A total of 247 species occurred and mean density was $1,625\;ind.\;m^{-2}$, both of which were dominated by annelid polychaetes(120 species and $1,241m^{-2}$). Dominant species were the polychaetes Ampharete arctica, Lumbrineris longifolia, Mediomastus californiensis and Euclymene oerstedi, with a density of 445(${\pm}1,837\;ind.\;m^{-2}$), 103(${\pm}148\;ind.\;m^{-2}$), 55(${\pm}83\;ind.\;m^{-2}$) and 50(${\pm}104\;ind.\;m^{-2}$), respectively. The study area was divided into 3 station group based on the cluster analysis and nMDS ordination. These assemblage were : 1)the group 1 and 2 were associated with coarse sediment dominated stations and 2)the group 3 was connected with a mixed and fine sediment dominated stations group. The BPI and AMBI index were applied to assess the benthic ecological status. The ecological status of the Garorim Bay was "good status(slightly polluted)" to "high status(normal)" at most sampling stations during spring and summer. In conclusion, the two marine biotic index calculated shown that the Garorim Bay had a good ecological status.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.2
• /
• pp.121-129
• /
• 2014

Marine algal flora and community structure were seasonally investigated at four sites in the vicinity of the Igidae on the southern east coast of Korea from May 2010 to February 2011. A total of 66 species including 9 of Chlorophyta, 14 of Phaeophyta, 43 of Rhodophyta were found during the survey period. Among these species, 16 species were found throughout the year. Seasonal mean biomass in wet weight was 123.6 (spring), 2,061.6 (summer), 412.0 (autumn), 678.9 (winter) $g{\cdot}m^{-2}$. Maximum biomass was recorded in summer($2,061.6g{\cdot}m^{-2}$), and minimum was recorded in spring($123.6g{\cdot}m^{-2}$). Spatial maximum and minimum species number were recorded at station 3 and 4(50 species) and at station 1(47 species). At station 1, 2 directly exposure on Yongho and Daeyeon cheon (stream) run off, and discharge from Nambu sewage treatment plants near coastal area, species diversity was relatively low and dominant species were similar throughout four seasons. The R/P, C/P and (R+C)/P value reflecting flora characteristics were 3.07, 0.64 and 3.71, respectively. The flora investigated could be classified into six functional groups such as coarsely branch form 39.39 %, sheet form 30.30 %, thick leather form 13.64 %, filamentous form 12.12 %, crustose form 3.03% and jointed calcareous form 1.52 % during survey period. The number of marine algae species in Igidea were 96 species at 1996 to 1997 and 66 species at 2010 to 2011, respectively. The change of seaweed species is due to the pollution loaded from sewage treatment plant and stream. We thus recommend that the positive maintenance control method like sewage treatment, for the protection of seaweed bed should be proceeded to near coastal area.

• The Korean Journal of Mycology
• /
• v.48 no.3
• /
• pp.355-367
• /
• 2020

One hundred representative species of fungi in Korea were selected and their Korean names were proposed to increase interest in fungi among Korean people. This task was performed under the supervision of the Committee of Mycological Terms, under the Korean Society of Mycology. First, the committee established the criteria for selecting 100 representative species of fungi in Korea and then selected the candidate fungal species accordingly. To ensure the uniformity and stability of Korean fungal names, the principle of naming fungi in Korean was established, and the candidate Korean fungal names were presented accordingly. Finally, the candidate Korean fungal names were posted online to collect opinions of the members of the Korean Society of Mycology. The candidate Korean names of the plant pathogenic fungi and mushrooms were reviewed by the Korean Society of Plant Pathology and the Korean Society of Mushroom Science, respectively. After their opinions were considered, the Korean names for 100 representative fungi in Korea were finally determined. The 100 fungi comprised 41 common molds and yeasts, 28 plant pathogenic fungi, and 31 mushrooms.

• Geophysics and Geophysical Exploration
• /
• v.5 no.4
• /
• pp.223-235
• /
• 2002

Since weak Bones or geological lineaments are likely to be eroded, there may develop weak Bones beneath rivers, and a careful evaluation of ground condition is important to construct structures passing through a river. DC resistivity method, however, has seldomly applied to the investigation of water-covered area, possibly because of difficulties in data aquisition and interpretation. The data aquisition having high quality may be the most important factor, and is more difficult than that in land survey, due to the water layer overlying the underground structure to be imaged. Through the numerical modeling and the analysis of a case history, we studied the method of resistivity survey at the water-covered area, starting from the characteristics of measured data, via data acquisition method, to the interpretation method. We unfolded our discussion according to the installed locations of electrodes, ie., floating them on the water surface, and installing them at the water bottom, because the methods of data acquisition and interpretation vary depending on the electrode location. Through this study, we could confirm that the DC resistivity method can provide fairly reasonable subsurface images. It was also shown that installing electrodes at the water bottom can give the subsurface image with much higher resolution than floating them on the water surface. Since the data acquired at the water-covered area have much lower sensitivity to the underground structure than those at the land, and can be contaminated by the higher noise, such as streaming potential, it would be very important to select the acquisition method and electrode array being able to provide the higher signal-to-noise ratio (S/N ratio) data as well as the high resolving power. Some of the modified electrode arrays can provide the data having reasonably high S/N ratio and need not to install remote electrode(s), and thus, they may be suitable to the resistivity survey at the water-covered area.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.25 no.6
• /
• pp.346-361
• /
• 2013

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2012. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. The conclusions are as follows : (1) The research works on thermal and fluid engineering have been reviewed as groups of fluid machinery, pipes and valves, fuel cells and power plants, ground-coupled heat pumps, and general heat and mass transfer systems. Research issues are mainly focused on new and renewable energy systems, such as fuel cells, ocean thermal energy conversion power plants, and ground-coupled heat pump systems. (2) Research works on the heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer, and industrial heat exchangers. Researches on heat transfer characteristics included the results for natural convection in a square enclosure with two hot circular cylinders, non-uniform grooved tube considering tube expansion, single-tube annular baffle system, broadcasting LED light with ion wind generator, mechanical property and microstructure of SA213 P92 boiler pipe steel, and flat plate using multiple tripping wires. In the area of pool boiling and condensing heat transfer, researches on the design of a micro-channel heat exchanger for a heat pump, numerical simulation of a heat pump evaporator considering the pressure drop in the distributor and capillary tubes, critical heat flux on a thermoexcel-E enhanced surface, and the performance of a fin-and-tube condenser with non-uniform air distribution and different tube types were actively carried out. In the area of industrial heat exchangers, researches on a plate heat exchanger type dehumidifier, fin-tube heat exchanger, an electric circuit transient analogy model in a vertical closed loop ground heat exchanger, heat transfer characteristics of a double skin window for plant factory, a regenerative heat exchanger depending on its porous structure, and various types of plate heat exchangers were performed. (3) In the field of refrigeration, various studies were executed to improve refrigeration system performance, and to evaluate the applicability of alternative refrigerants and new components. Various topics were presented in the area of refrigeration cycle. Research issues mainly focused on the enhancement of the system performance. In the alternative refrigerant area, studies on CO2, R32/R152a mixture, and R1234yf were performed. Studies on the design and performance analysis of various compressors and evaporator were executed. (4) In building mechanical system research fields, twenty-nine studies were conducted to achieve effective design of mechanical systems, and also to maximize the energy efficiency of buildings. The topics of the studies included heating and cooling, HVAC system, ventilation, renewable energy systems, and lighting systems in buildings. New designs and performance tests using numerical methods and experiments provide useful information and key data, which can improve the energy efficiency of buildings. (5) In the fields of the architectural environment, studies for various purposes, such as indoor environment, building energy, and renewable energy were performed. In particular, building energy-related researches and renewable energy systems have been mainly studied, reflecting interests in global climate change, and efforts to reduce building energy consumption by government and architectural specialists. In addition, many researches have been conducted regarding indoor environments.

• Journal of the Korean Vacuum Society
• /
• v.18 no.1
• /
• pp.66-72
• /
• 2009

The detection methods are required to monitor and diagnose the abnormality on the insulation condition inside a gas-insulated switchgear (GIS). Due to a good sensitivity to the products decomposed by partial discharges (PDs) in $SF_6$ gas, the development of a SWNT gas sensor is actively in progress. However, a few numerical studies on the diffusion mechanism of the $SF_6$ decomposition products by PD have been reported. In this study, we modeled $SF_6$ decomposition process in a chamber by calculating temperature, pressure and concentration of the decomposition products by using a commercial CFD program in conjunction with experimental data. It was assumed that the mass production rate and the generation temperature of the decomposition products were $5.04{\times}10^{-10}$ [g/s] and over 773 K respectively. To calculate the concentration equation, the Schmidt number was specified to get the diffusion coefficient functioned by viscosity and density of $SF_6$ gas instead rather than setting it directly. The results showed that the drive potential is governed mainly by the gradient of the decomposition concentration. A lower concentration of the decomposition products was observed as the sensors were placed more away from the discharge region. Also, the concentration increased by increasing the discharge time. By installing multiple sensors the location of PD is expected to be identified by monitoring the response time of the sensors, and the information should be very useful for the diagnosis and maintenance of GIS.

• Journal of the Korean Vacuum Society
• /
• v.17 no.4
• /
• pp.331-340
• /
• 2008

A method of measuring the current and voltage is suggested in the circuit of cold cathode fluorescent lamps (CCFLs) which are driven at a high frequency of $50{\sim}100\;kHz$ and a high voltage of several kV. It is difficult to measure the current and voltage in the lamp circuit, because the impedance of the probe at high voltage side causes the leakage current and the variation of luminance. According to the analysis of equivalence circuit with the probe impedance and leakage current, the proper measuring method is to adjust the input DC voltage and to keep the specific luminance when the probe is installed at a high voltage circuit. The lamp current is detected with a current probe or a high frequency current meter at the ground side and the voltage is measured with a high voltage probe at the high voltage side of lamp. The lamp voltage($V_C$) is measured between the ballast capacitor and the lamp electrode, and the output voltage($V_I$) of inverter is measured between inverter output and ballast capacitor. As the phases of lamp voltage($V_C$) and current ($I_G$) are nearly the same values, the real power of lamp is the product of the lamp voltage($V_C$) by the lamp current($I_G$). The measured value of the phase difference between inverter output voltage($V_I$) and lamp current($I_G$) is appreciably deviated from the calculated value at $cos{\theta}=V_C/V_I$.

• Food Science and Preservation
• /
• v.15 no.1
• /
• pp.118-124
• /
• 2008

The chemical compositions and antioxidant activities of four different colored rice cultivars (white-colored rice: WCR, brown-colored rice: BCR, brown-colored waxy rice: BCWR, black-colored rice: BKCR) were investigated to evaluate the quality characteristics of the new brown rice cultivars. There was no significant differences in chemical compositions amongst the four rice cultivars, although WCR had higher amount of carbohydrate than did the other rice cultivars. 'The major fatty acids in the four rice cultivars were linoleic, oleic and palmitic acids, which accounted for about 96% of total fatty acids. Of note, higher amounts of saturated fatty acids (24.8%) and lower amount of unsaturated fatty acids (75.2%) were observed in BKCR than in the other rice cultivars. Two brown-colored rice cultivars, BCR and BCWR, possessed higher amounts of linoleic acid (40.8% and 42.1%, respectively) than did the other cultivars. The highest level of ${\alpha}$-tocopherol was found in WCR (51.3mg%), followed by BKCR (38.6mg%), BCWR (37.2 mg%), and BCR (34.5mg%). Free amino acid analysis showed that aspartic and glutamic acids were major amino acids of all cultivars, whereas phenylalanine, lysine, and histidine were minor. Particularly, relatively higher contents of aspartic and glutamic acids were found in BKCR, while relatively higher levels of alanine and ${\gamma}$-aminobutyric acid (GABA) were observed in BCR and BCWR. Also, BKCR had the highest phenolic content and antioxidant activity of any cultivar, followed by the two brown-colored rice cultivars and WCR. These results suggested that the new brown rice cultivars may possess quality characteristics intermediate between those of WCR and BCR.