• Korean Journal of Medicinal Crop Science
• /
• v.20 no.5
• /
• pp.393-397
• /
• 2012

This study was investigated seed germination of Rheum undulatum L. depends on storage temperature (-20, $5^{\circ}C$ and room temperature), germination temperature (5, 15, 25 and $40^{\circ}C$) and a soaking treatment (no soaking, 2 days and 4 days). There was not much difference from the germination rate of R. undulatum L. in storage temperature conditions for 8 weeks. The highest of germination rate occurred over 80 percentage at $25^{\circ}C$. When R. undulatum L. was soaked with tap water for four days, the average values of germination velocity and germination day were represented of 1.7 ea/day and 1.68 days. These results may help our understanding of variations in germination characteristics for R. undulatum L. seeds treated under various germination conditions.

• Child Health Nursing Research
• /
• v.16 no.4
• /
• pp.352-359
• /
• 2010

Purpose: To explore premature infants' pain response to routine procedures in the neonatal intensive care unit (NICU). Methods: The participants were 56 preterm infants who showed 149 pain responses to 8 high frequency routine procedures which were evaluated using the Premature Infant Pain Scale (PIPS). Videotaped recording was used for data collection. Data were analyzed with descriptive analysis, paired t-test, and Pearson's correlation coefficient. Results: PIPS scores for each procedure were as follows; for removal of central catheter dressing, 6.17 (2.04), venous sampling, 6.12 (2.87), intramuscular injection, 6.05 (2.38), insertion of a peripheral line, 5.38 (2.16), insertion of feeding tube, 4.40 (1.34), heel stick, 4.33 (1.23), insertion of central line, 4.00 (2.12), and endotracheal suctioning, 2.90 (1.25). PIPS score was negatively correlated with gestational age (r=-.218, p=.007) and birth weight (r=-.249, p=.002) among general characteristics of the infants. Conclusion: The majority of 8 routine procedures were found to be painful for premature infants in the NICU. Therefore, adequate pain management related to procedures should be provided to premature infant in the NICU.

• BMB Reports
• /
• v.48 no.8
• /
• pp.461-466
• /
• 2015

Epigallocatechin gallate (EGCG) and curcumin are well known to naturally-occurring anticancer agents. The aim of this study was to verify the combined beneficial anticancer effects of curcumin and EGCG on PC3 prostate cancer cells, which are resistant to chemotherapy drugs and apoptosis inducers. EGCG showed weaker inhibitory effect on PC3 cell proliferation than two other prostate cancer cell lines, LNCaP and DU145. Co-treatment of curcumin improved antiproliferative effect of EGCG on PC3 cells. The protein expressions of p21 were significantly increased by the co-treatment of EGCG and curcumin, whereas it was not changed by the treatment with each individual compound. Moreover, treatments of EGCG and curcumin arrested both S and G2/M phases of PC3 cells. These results suggest that the enhanced inhibitory effect of EGCG on PC3 cell proliferation by curcumin was mediated by the synergic up-regulation of p21-induced growth arrest and followed cell growth arrest. [BMB Reports 2015; 48(8): 461-466]

• Journal of Welding and Joining
• /
• v.29 no.3
• /
• pp.51-57
• /
• 2011

Bead shape control with gas force process has been developed to overcome the concave back bead in pipe orbital welding. However, It is impossible to make a convex back bead using the existing gas nozzle, because it has high gas-consuming and low gas force. The purpose of this paper, to develop optimum shape of nozzle which to reduce the consumption of gas, maximizing the shield gas force with low cost and high productivity coincide the Green welding. In this paper venturi-type nozzle was designed by using the Venturi meter and compared velocity, pressure, arc shape in the flat position with existing CP-nozzle. As a result, Venturi-type nozzle's maximum velocity and pressure was improved at the same flow rate. Also heat input was increased by the arc contraction in the flat position.

• Journal of Welding and Joining
• /
• v.29 no.3
• /
• pp.58-63
• /
• 2011

Bead shape control with gas force process has been developed to overcome the concave back bead in pipe orbital welding. However, It is impossible to make a convex back bead using the existing gas nozzle, because it has high gas-consuming and low gas force. The purpose of this paper, to develop optimum shape of nozzle which to reduce the consumption of gas, maximizing the shield gas force with low cost and high productivity coincide the Green welding. In this paper venturi-type nozzle was compared with existing CP-type nozzle by TIG pulse welding in overhead position. As a result, CP-type occurs the wormholes in the overhead position, but the Venturi-type without the pore and formed a good bead appearance.

• Journal of Welding and Joining
• /
• v.32 no.3
• /
• pp.60-67
• /
• 2014

The ability of electronic packages and assemblies to resist solder joint failure is becoming a growing concern. This paper reports on a study of high speed shear energy of Sn-4.0wt%Ag-0.5wt%Cu (SAC405) solder with different electroless Ni-P thickness, with $HNO_3$ vapor's status, and with various pre-conditions. A high speed shear testing of solder joints was conducted to find a relationship between the thickness of Ni-P deposit and the brittle fracture in electroless Ni-P deposit/SAC405 solder interconnection. A focused ion beam (FIB) was used to polish the cross sections to reveal details of the microstructure of the fractured pad surface with and without $HNO_3$ vapor treatment. A scanning electron microscopy (SEM) and an energy dispersive x-ray analysis (EDS) confirmed that there were three intermetallic compound (IMC) layers at the SAC405 solder joint interface: $(Ni,Cu)_3Sn_4$ layer, $(Ni,Cu)_2SnP$ layer, and $(Ni,Sn)_3P$ layer. The high speed shear energy of SAC405 solder joint with $3{\mu}m$ Ni-P deposit was found to be lower in pre-condition level#2, compared to that of $6{\mu}m$ Ni-P deposit. Results of focused ion beam and energy dispersive x-ray analysis of the fractured pad surfaces support the suggestion that the brittle fracture of $3{\mu}m$ Ni-P deposit is the result of Ni corrosion in the pre-condition level#2 and the $HNO_3$ vapor treatment.

• Food Science of Animal Resources
• /
• v.31 no.5
• /
• pp.663-667
• /
• 2011

This study was performed to measure the angiotensin I-converting enzyme (ACE) inhibitory activity of peptide extracts derived from the enzymatic proteolysis of Hanwoo Musculus longissimus (M. longissimus) during cold storage. Thermolysin (80 ppm, w/w) and protease type XIII (100 ppm, w/w) were injected separately or in combination for the enzymatic proteolysis of sarcoplasmic and myofibrillar proteins prior to storage at $5^{\circ}C$ (T1) or at $-1^{\circ}C$ (T2) in a chilling room for 9 days. Beef injected with thermolysin (E2) and thermolysin+protease type XIII (E3) showed a significantly higher degree of hydrolysis at both storage temperatures (p<0.05). During the storage period, T1E2 at day 6 and T1E3 at day 9 showed the strongest ACE inhibitory activity with sarcoplasmic and myofibrillar protein proteolysates. Macromolecules greater than 10,000 Da were removed by ultra filtration, and the filtrates were separated into fractions using gel filtration. Five and three major fractions were collected from S-T1E2-6 and M-T1E3-9 extracts, respectively, and the $4^{th}$ fraction of the S-T1E2-6 extracts showed the highest ACE inhibitory rate of $61.96{\pm}7.41%$.

• Journal of the Microelectronics and Packaging Society
• /
• v.21 no.3
• /
• pp.51-56
• /
• 2014

The reliability of solder joint is significantly affected by the property of surface finish. This paper reports on a study of high speed shear energy and failure mode for Sn-4.0wt%Ag-0.5wt%Cu (SAC405) solder joints with the time of Pd activation. The nodule size of electroless Ni-P deposit increased with increasing the time of Pd activation. The roughness (Ra) of electroless Ni-P deposit decreased with increasing the time of Pd activation. Then, with $HNO_3$ vapor, the quasi-brittle and brittle mode of SAC405 solder joint decreased with increasing the time of Pd activation. This results indicate that the increase in the Pd activation time for Electroless Ni/ Electroless Pd/ Immersion Au (ENEPIG) surface finish play a critical role for improving the robustness of SAC405 solder joint.

• KEPCO Journal on Electric Power and Energy
• /
• v.3 no.2
• /
• pp.99-105
• /
• 2017

Traditionally, the GPS coordinates of a transmission tower have been measured at the center of the tower on the ground, which usually takes dozens of minutes. However, this method often produces errors of tens of meters or sometimes demands several hours due to signal interference from the huge steel structure of the tower. To solve this problem, in this paper, a new measuring method for GPS coordinates of steel towers is proposed. First, instead of measuring the center of a tower, four GPS coordinates of the edges of the tower are obtained by using a measuring device with three GPS modules, and then are averaged to find the center of the tower. When a measured value is deviated considerably by signal interference, a newly proposed algorithm filters out such an inaccurate coordinate, effectively calculating the center of the tower by using other edge coordinates. Through field tests, it was confirmed that this new algorithm could improve the task efficiency and its measuring accuracy for GPS coordinates in a GPS interference environment.

• Ocean and Polar Research
• /
• v.37 no.2
• /
• pp.141-147
• /
• 2015

Snow albedo can be decreased if there are any impurities on the snow surface other than the snow itself. Due to the decrease of snow albedo, melting rates of surface snow can increase, which is very crucial in climate change and hydrogeology in many parts of the world. Anthropogenic black carbons caused by the incomplete combustion of fossil fuel affect snow and tephra particles generated by geologic volcanic activities reduce snow albedo. In this study, we investigated isotopic compositions for snow covered by tephra particles and compared with this with clean snow. Isotopic compositions of snow with tephra statistically show more enriched than those of clean snow (p<0.02). This can be explained by the fact that snow becomes enriched in $^{18}O$ or D relative to meltwater as melting rates are increased. In addition, the slopes of the linear regression between oxygen and hydrogen for snow with tephra and clean snow are 6.7 and 8, respectively, and the latter is similar to that of the global meteoric water line of 8. Therefore, we can conclude that snow impurities control the isotopic compositions of snow, which is very crucial in the study of climate change and hydrogeology. To quantitatively explain these observations, melting experiments and numerical approaches are required.