• Journal of Mushroom
• /
• 제8권3호
• /
• pp.109-115
• /
• 2010

We investigated the morphological traits, hardness and color of fruting bodies on eight strains according to changes of the humidities in mushroom house in Flammulina velutipes. The morphological traits like length and thickness of stipe, diameter and thickness of pilei didn't show any relations to humidity. Variation of these traits were rather showed by strains. ASI 4065 and ASI 4031 produced the longest stipes and ASI 4103 did the shortest ones. Fruiting body of ASI 4103 showed the most thickness of stipe, diameter and thickness of pilei. The pilei of ASI 4065, ASI 4021 and the stipe of ASI 4153 was the thinest. Brightness (L) values of white strains were increased at the low humidity except ASI 4021. But chroma (a, b) value showed little variation according to the humidity. L value of brown strains usually increased at the low humidity and a chroma (a, b) value showed little variation according to the humidity. But the chroma (a) value of pilei increased and the chroma (b) value of pilei decreased at the hight humidity. Most strains were brighter at pilei than at stipes. Hardness were not any relations to the humidity. In general, hardness of stipes were higher than that of pilei and their degrees were different according to strains. Hardness of ASI 4021 was the highest and ASI 4166 was the lowest. White strains were higher than brown strains at the hardness. As a result, hardness was rather affected by strains than by humidity.

• Korean Journal of Soil Science and Fertilizer
• /
• 제43권5호
• /
• pp.602-609
• /
• 2010

To investigate desalinization patterns of surface reclaimed saline-sodic soil (RSSS) with subsurface layer of macroporous medium, multi-layered soil columns were constructed. For the multi-layered soil columns, gypsum was treated at the rate of 5 cmolc $kg^{-1}$ in surface (top) while coal bottom ash (CBA) was placed into intermediate layer below the gypsum-treated surface soils followed by the reclaimed saline-sodic soil as bottom layer (BL). The lengths of top soil was 30 cm long while the lengths of the CBA were 20 and 30 cm long. The saturated hydraulic conductivities (Ksat) were $0.39{\times}10^{-4}$ and $0.31{\times}10^{-4}cm\;sec^{-1}$ for RSSS(30 cm)-CBA(20 cm)-BL(20 cm) and RSSS(30 cm)-CBA(20 cm)-RSSS(20 cm), respectively while the lowest $K_{sat}$. was $0.064{\times}10^{-4}cm\;sec^{-1}$ for RSSS(30 cm)-CBA(20 cm)+BL(20 cm). The time required to reach the lowest EC in eluent, 0.3 dS $m^{-1}$ from 33.9 dS $m^{-1}$ was shorter in multi-layered soil columns with GR-CBA than that of RS-SRS, representing that rate of desalinization was greater than 99%. Exchangeable Na decreased by 94.8~96.2 %, while exchangeable Ca increased by 98~129 %.

• Journal of the Korean earth science society
• /
• 제34권4호
• /
• pp.356-367
• /
• 2013

We study on the concept and reason of seasonal change that 164 university students have. Subsequently the concept types on the seasonal change are classified according to the characteristics and conceptual change after teaching on astronomy. All of the students were simply checked by the questionnaire of multiple choice and essay method before learning on the subjects. And then they answered to questionnaires of similar type after one semester. By the analyzed results, we classify it to three steps of hierarchical concept structure. The first step is the cosmic perspective that is related to the Earth's condition and motion. The second step is the influence of the Earth that is directly affected by the first step. The third step is observer's perspective on the Earth depending on the second step. Among the answers, the first step is prominent and second step is rare. The answers on the reason of seasonal change show some kinds of type which are 1st, 1-2nd, 1-3rd, and 1-2-3rd step. By the result, it is arranged in sequence like as 1-3rd>1st>1-2nd>1-2-3rd type. The lowest number of students was 2nd step of the Sun's altitude and duration of daytime in pre-test. However the students of 2nd step obtained more correct scientific concept on the seasonal change after learning on the subjects, and got the higher score in the post-test than in the pre-test. We found how much important the hierarchical structure on the reason of seasonal change is. As the results, second step on the learning of the Sun's altitude and duration of daytime essentially have to teach after first step. And then third step have to teach. At last, it is sure that the students can obtain the concept of seasonal change.

• Korean Journal of Poultry Science
• /
• 제37권1호
• /
• pp.63-68
• /
• 2010

This experiment was conducted to investigate the effects of dietary supplementation of fermented apple pomace (FAP) and cinnamon on laying performance, egg quality and blood characteristics in laying hens. A total of two hundred 57-wk-old Hy-Line laying hens were divided into five groups with 4 replicates of 10 birds each; control, 0.1% probiotics, 1.0% fermented apple pomace 1.0%, 0.1% cinnamon and 1.0% fermented apple pomace with 1.0% cinnamon. Chickens fed the diets containing 1.0% of fermented apple pomace showed higher egg production than the chickens fed the other diets. No synergic effect on laying performance was found when fermented apple pomace and cinnamon were added to the diets in laying hens. There was no significant major differences in egg quality and serum blood biochemical profiles. These results suggest the possibility that fermentation of apple pomace could be used as the alternative of antibiotic growth promoters.

• The Journal of Korean Academy of Prosthodontics
• /
• 제58권4호
• /
• pp.313-320
• /
• 2020

Purpose: The purpose of this study was to evaluate the machining precision and the marginal and internal fit of single restorations fabricated with three types of lithium disilicate ceramic blocks and to evaluate the correlation. Materials and methods: Single restorations were designed using a CAD software program. The crown designed model file was extracted from the CAD software program. Three types of lithium disilicate blocks (Rosetta; HASS, IPS e.max CAD; Ivoclar vivadent, VITA Suprinity; VITA) were milled using a milling machine. For the fabrication of the crown scanned model file, the intaglio surface of the restoration was digitized using a contact scanner. Then, using the three-dimensional inspection software (Geomagic control X; 3D Systems), the process of the overlap of the crown designed model and the scanned model and 3-dimensional analysis was conducted. In addition, the marginal and internal fit of the crowns was evaluated by a silicone replication method. The difference among three types of single ceramic crown was analyzed using a Kruskal-Wallis H test, and Spearman correlation analysis was performed to analyze the correlation between machining precision and fitness (α=.05). Results: There was a significant difference in the machining precision and the marginal and internal fit according to the type of ceramic block (P<.001). In addition, the machining precision and the marginal and internal fit were positively correlated (P<.001). Conclusion: The marginal fit of crowns fabricated according to the types of ceramic blocks was within the clinically acceptable range (< 120 ㎛), so it can be regarded as appropriate machining precision applicable to all clinical as aspects in terms of the marginal fit.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제30권9B호
• /
• pp.610-618
• /
• 2005

As developed Internet and Computer Capability, Many Users take the many information through the network. So requirement of User that use to network was rapidly increased and become various. But it spend much time to accept user requirement on current network, so studied such as Active network for solved it. This Active node on Active network have the capability that stored and processed execution code aside from capability of forwarding packet on current network. So required execution code for executed packet arrived in active node, if execution code should not be in active node, have to take by request previous Action node and Code Server to it. But if this execution code take from previous active node and Code Server, bring to time delay by transport execution code and increased traffic of network and execution time. So, As used execution code stored in cache on active node, it need to increase execution time and decreased number of request. So, our paper suggest ANC caching technique that able to decrease number of execution code request and time of execution code by efficiently store execution code to active node. ANC caching technique may decrease the network traffic and execution time of code, to decrease request of execution code from previous active node.

• Journal of Bio-Environment Control
• /
• 제15권4호
• /
• pp.306-316
• /
• 2006

In this study, the effect of the shade level, water flow rate applied to the shades and the temperature of water on the greenhouse cooling was investigated depending on the shade level of 0, 35, 55, 75%, and water flow rate and water temperature by the test on the small wooden frames to find out the low cost cooling method. With increasing of the dry bulb temperature of outside air, the dry bulb temperature in the wooden frames increased. For the frames with the shade and water, inside temperatures of the frames were lower of -0.2$\sim$-1.2$^{\circ}C$ than the temperature of the outside air and higher than the water temperature. For the frames without water, inside temperatures of the frames were higher of 1.7$\sim$4$^{\circ}C$ than the outside and not affected by the shade level very much. The water flow rate and the temperature of the water were not the important factors to decrease the inside temperatures in the frames. The black globe temperature became lower with increasing of shade level. The shade frames with water curtain showed the best cooling effect because of reducing thermal radiation and cooling the plastic film cover. The surface temperatures of the plastic film cover for the water supplied modules became lower with increasing of the shade level. The relative humidity was decreased with the dry bulb temperature in the frame increasing and not affected by the dry bulb temperature of the outside air for the frames with the shade and water.

• Journal of dental hygiene science
• /
• 제13권1호
• /
• pp.36-44
• /
• 2013

The purpose of this study was to provide basic data for healthy and effective dental management by providing the knowledge and information on periodontal health promotion as well as high dental health interests, by doing a comparative analysis of the effect of dental health knowledge and oral hygiene management skills of people in their 20s on periodontal health status assessment, to find periodontal disease early and prevent it targeting 130 adults in their 20s who visited dental hygienic lab for comprehensive dental hygiene care and treatment from September 25 to October 30. The data collected used SPSS 18.0. To present the technical characteristics of the data, frequency was used and chi-squared test through cross-analysis was conducted to investigate dental health knowledge and the relevance between the variables of oral hygiene management skills of general characteristics. To examine periodontal health status assessment, t-test and One-way ANOVA and Turkey post-hoc tests were carried out at the 5% significance level. Regression analysis was performed to investigate the impact of dental health knowledge and oral hygiene management skills on dental health status assessment. As a result of this study, as dental health knowledge on tooth brushing of people in their 20s increased, plaque index reduced, as dental health knowledge on periodontal disease increased, plaque index reduced. Dental health status assessment according to a total number of times tooth brushing, tooth brushing methods, whether to use dental hygiene devices, smoking status, drinking frequency per week, whether to have oral health education was statistically significant. To improve the level of dental health knowledge and oral hygiene management skills, oral health education should be strengthened as well as the publicity through the media to have the information on oral health and learn it.

• Economic and Environmental Geology
• /
• 제53권1호
• /
• pp.45-69
• /
• 2020

In Danyang area, various geological structures as well as various lithology and strata are well developed, which are useful for studying paleo-environment and structural movements, and also typical karst landforms, wethering landforms and river landforms. If geologically and geomorphologically valuable resources are used in terms of geotourim perspective, it is expected that revitalization of regional economy through diversification of attracting factors and employment creation of local people. Danyang has many excellent geological resources for geological field trip, they can greatly contribute to the development of geology such as expanding the base of geology and cultivating successive generations. In this study, we have evaluated newly discovered sites and previously excavated resources based on academical and educational values. By using these geological and geomorphological resources, we suggest three geotrail courses as follows. First, Geo-trail A is mainly focused on geological structures (Route A: Jeong Hwan Route), where we can learn geological deformation and movement through various brittle and ductile deformation structures. Second, Geo-trail B is mainly focused on stratigraphic importance (Route B: Soon-Bok Route), which emphasizes on various rocks, strata and contact relationship. Third, Geo-trail C is mainly focused on geomorphological landforms and landscapes (Route C: Satgat Route), which provide information about different geomorphological landforms and the interaction between different geological agents. In order to operate these geotrail courses efficiently, installation of explanation boards and view points, cultivate local commentators, and visitor centers and experience programs should be properly prepared together.

• Horticultural Science & Technology
• /
• 제31권4호
• /
• pp.473-482
• /
• 2013

Molecular markers, as an efficient selection tool, have been and is being used for practical breeding program in chili pepper (Capsicum annuum L.). Recently, a lot of researches on inheritance and genetic analysis for quantitative traits including capsaicinoids, carotenoids, and sugar content in pepper are being performed worldwide. It has been also reported that QTL mapping is a necessary tool to develop molecular markers associated with the quantitative traits. In this study, we suggested a new method to construct a pepper genetic map using SNP (HRM) markers generated from NGS resequencing of female and male parents. Plant materials were C. annuum 'NB1' (female parent), C. chinense 'Jolokia' (male parent), and their $F_2$ population consisting of 94 progenies. Sequences of 4.6 Gbp and 6.2 Gbp were obtained from NGS resequencing of 'NB1' and 'Jolokia', respectively. Totally, 4.29 million SNPs between 'NB1' and 'Jolokia' were detected and the 1.76 million SNPs were clearly identified. Among them, total 145 SNP (HRM) primer pairs covering pepper genetic map were selected, and the 116 SNP (HRM) markers of them were located on this map. Total distance of the map, which consisted of 12 linkage groups and matched with basic chromosome numbers of pepper, was 1,167.9 cM. According to the mapping result, we concluded that our mapping method was suitable to construct a pepper genetic map fast and accurately. In addition, the genetic map could be directly used for QTL analysis of traits different between both parents.