• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.1026-1029
• /
• 2002

Outlet of gas has been a big problem in deforming rubber or plastic in pressing mold. Air vent has been used to solve the problem, but it has weak points such as the increased cost, the increased number of process, and vent marks on the surface of a produce. In this study, the sintering method is used for making porous metal mold. Porous metal mold has many open pores, which are very small. When Porous metal mold is used for pressing mold, all process would be made short, produce cost would be down, and it would not leave vent marks on the surface of a produce. Porosity varies from sintering and pressing conditions, which are the pressure of compacting powder, the length of sintering time, sintering temperature and sintering atmosphere etc. This study will find optimized sintering temperature condition for the Porous metal mold.

• Journal of Welding and Joining
• /
• 제4권1호
• /
• pp.40-46
• /
• 1986

This investigation studied the toughness variations in the narrow gap weldment with the notch location. Specimens with the notch at the center of the weld metal showed the lowest toughness. As the location of notchmoves to fusion line, the impact properties improve reaching a maximum at the fusion boundaries. This improvement in toughness can be explained by the microstructural feature showing in the narrow gap weldment. "one pass/layer" technique performed in narrow gap welding results in the increased proportion of refined structure as approaching to fusion boundary from weld center and thus leave 100% refined structure along the fusion boundary. HAZ also shows 100% refined structure with respect to base metal structure accompanied with the significant suppression of ductile-brittle transition temperature.mperature.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2003년도 봄 학술발표논문집 Vol.30 No.1 (B)
• /
• pp.322-324
• /
• 2003

생체인식 기술은 현재까지 많은 발전을 거듭하고 있으며 국내에서도 연구는 물론 표준화작업 및 데이터 베이스 구축이 활발히 진행되고 있다. 생체인식은 신체의 여러 부분을 이용하는 방법과 습관에서 비롯된 특징을 이용하는 방법이 있는데, 본 연구에서는 이 중에서 개인의 필기습관 정보를 이용하여 인식하였다. 본 연구에서는 필기습관에 주목하여 서명하는 사람의 습관이 잘 드러나는 펜의 기울임과 눌림, 펜의 방위각도 둥의 성분이 표현되어지는 동적인 생채정보를 감지하고 특성을 추출할 수 있는 타블렛과 펜을 사용하여 서명정보를 추출한다. 이렇게 생성된 서명정보의 특징을 추출하기 위하여 패턴인식분야에 널리 활용하고 있는 주성분요소분석(PCA, Principal Component Analysis), 독립성분요소분석(ICA, Independent Component Analysis)기법에 적용하였다. 생성된 두 특징벡터 사이의 거리를 Euclidean Distance를 이용하여 구하고 Nearest Neighbor를 비교하여 인식률을 알아보고 교차인식(Cross Validation) 기법 중 하나인 Leave-One-Out 방법을 이용한 분류성능 측정을 통하여 데이터의 신뢰수준을 알아보았다.

• 대한산업공학회지
• /
• 제16권2호
• /
• pp.1-9
• /
• 1990

The control of deterioration processes for which only incomplete state information is available is examined in this study. When the deterioration is governed by a Markov process, such processes are known as Partially Observable Markov Decision Processes (POMDP) which eliminate the assumption that the state or level of deterioration of the system is known exactly. This research investigates a two state partially observable Markov chain in which only deterioration can occur and for which the only actions possible are to replace or to leave alone. The goal of this research is to develop a new jump algorithm which has the potential for solving system problems dealing with continuous state space Markov chains.

• Journal of Korean Neurosurgical Society
• /
• 제57권2호
• /
• pp.140-142
• /
• 2015

Penetrating neck injuries constitute 5-10% of all trauma cases. These injuries may cause life-threatening suppurative or vascular complications, but the severity and extent of damage depends upon the inflicting object and the involved structures. If significant complications are not expected, then it is best to leave the foreign body embedded and avoid surgical risks. We present a rare case of a foreign body embedded in the neck causing tinnitus and foreign body sensation.

• Journal of Korean Neurosurgical Society
• /
• 제53권2호
• /
• pp.118-120
• /
• 2013

We report a rare case of remote cerebellar hemorrhage after intradural disc surgery at the L1-2 level. Two days after the spine surgery, patient complained unexpected headache, dizziness, nausea and vomiting. From the urgently conducted brain CT, it was reported that the patient had cerebellar hemorrhage. Occipital craniotomy and hematoma evacuation was performed, and hemorrhagic lesion on the right cerebellum was effectively removed. After occipital craniotomy, the patient showed signs of improvement on headache, dizziness, nausea and vomiting. He was able to leave the hospital after two weeks of initial operation without any neurological deficit. Remote cerebellar hemorrhage following spinal surgery is extremely rare, but may occur from dural damage of spinal surgery, accompanied with cerebrospinal fluid leakage. Early diagnosis is particularly important for the optimal treatment of remote cerebellar hemorrhage.

• Communications for Statistical Applications and Methods
• /
• 제7권2호
• /
• pp.489-497
• /
• 2000

The M/M/1 queue with impatient customers is studied. Impatient customers wait for service only for limited time K/0 and leave the system if their services do not start during that time. Notice that in the analysis of virtual waiting time, the impatient customer can be considered as the customer who enters the system only when his/her waiting time does not exceed K. In this paper, we apply martingale methods to the virtual waiting time and obtain the expected period from origin to the point where the virtual waiting time crosses over K or reaches 0, and the variance of this period. With this results, we obtain the expected busy period of the queue, the distribution, expectation and variance of the number of times the virtual waiting time exceeding level K during a busy period, and the probability of there being no impatient customers in a busy period.

• 한국의류산업학회지
• /
• 제7권6호
• /
• pp.641-649
• /
• 2005

This study is to make pH 9 reduction by adding NaOH to 1, 3, 5, 7, 9, 11% solution of thioglycollic acid, cysteine, cysteamin, to add it on helically winded natural hair and colored hair and leave them for 20, 40, 60 minutes, to add $NaBrO_3$ oxidant for 15 minutes and to compare and analyze the wave form. This study showed the results of permanent using thioglycollic acid, cysteine, cysteamin. In the permanent wave form according to the kind of reductant, concentration, and processing time, there were a little difference between thioglycollic acid and cysteine. But cysteamine not only showed apparent difference but also formed strong and elastic wave. The permanent wave is affected by the diagonosis of hair, the choice of permanent solution and the processing time. Therefore the scientific diagonosis of hair is to be considered first of all. By choosing the kind of solution, the concentration and the processing time according to the results of hair diagonosis and wave form, we can prevent the lengthening and damage of hair.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.933-938
• /
• 2007

These days, up-to-date humanoid robots are continuously developed. Among them, Qrio, Asimo[1,2] are famous for its unique walking technology and natural movement. These robots could show manufacturers' technological improvement and leave a good impression to the customer. In accordance with global trends, Samsung is also producing humanoid robot. The humanoid robot, however, could walk like a human compared to the industrial robot fixed in the factory. This feature could cause another dynamic effect while walking. In this paper, the robot's feet were examined to find out parameters that affect stability of the humanoid robot's feet. With the sensitivity analysis, the optimization procedure in design of experiments finds the most suitable performance of robot. Maximum deflection of the frame upon various cases was minimized, and rubber coefficients for shock absorption were optimized.

• 한국인쇄학회지
• /
• 제21권2호
• /
• pp.21-29
• /
• 2003

In gravure printing, all of the ink in the gravure cells does not leave the cell onto the substrate. The ink transfer from plate to paper in the gravure printing was simulated by computer. A few studies have dealt with cell withdrawal with simplified Newtonian flow models however, this work was performed with the non-Newtonian inks with different simulation software.