• Korean journal of applied entomology
• /
• v.18 no.2 s.39
• /
• pp.85-88
• /
• 1979

The cotton aphid, Aphis gossypii Glover, is known as the most important vectant vector of citrus tristeza virus, cucumber mosaic virus, potato virus Y and potato leafroll virus. This study conducted to investigate the life history of cotton aphid at Suweon, Korea$(Lat.37^{\circ}16'N,\;Long\;126^{\circ}59'E)$. The aphids were reared in small cages placed over twig of hibiscus and on the leaves of cucumber. The results obtained were summarized as follows: 1. Overwintering eggs hatched from mid to late April, with a hatching rate averaging seventy-nine percent. 2. The early-born progeny have 22 generations and the late-born progeny have 6 generations on hibiscus and cucumber from April to October. 3. The fundatrigeniae leave tile the primary host in late May to early June and migrate to the secondary hosts. 4. From early to mid Oct., the gynoparae migrate from the secondary hosts to the primary host. 5. The average length of life was about 29 days and they produced an average of 70 nymphs each. 6. The maximum number of aphids produced per female was 117 in the spring. 7. The developmental period ranged from 6 to 16 days (average 8 days), the reproductive period from 12.2 to 24.6 days (average 19 days). 8. The average number of nymphs produced by a female per dys was about 3.7, with a maximum number of 17.

• International Commerce and Information Review
• /
• v.18 no.4
• /
• pp.143-164
• /
• 2016

PICC are dealing with form requirements of international commercial contract under writings in confirmation, conclusion of contract dependent on agreement on specific matters or in a particular form, contract with terms deliberately left open, merger clauses, modification in a particular form. If a writing which is sent within a reasonable time after the conclusion of the contract and which purports to be a confirmation of the contract contains additional or different terms, such terms become part of the contract, unless they materially alter the contract or the recipient, without undue delay, objects to the discrepancy. Where in the course of negotiations one of the parties insists that the contract is not concluded until there is agreement on specific matters or in a particular form, no contract is concluded before agreement is reached on those matters or in that form. If the parties intend to conclude a contract, the fact that they intentionally leave a term to be agreed upon in further negotiations or to be determined by a third person does not prevent a contract from coming into existence. A contract in writing which contains a clause indicating that the writing completely embodies the terms on which the parties have agreed cannot be contradicted or supplemented by evidence of prior statements or agreements. However, such statements or agreements may be used to interpret the writing. A contract in writing which contains a clause requiring any modification or termination by agreement to be in a particular form may not be otherwise modified or terminated.

• Journal of Digital Convergence
• /
• v.10 no.10
• /
• pp.283-288
• /
• 2012

3D is the one of the current world in the spotlight as part of the future earnings of the business sector. Existing flat 2D and stereoscopic 3D to change the 3D shape and texture make walking along the dimension of the real world and the virtual reality world by making it feel contemporary reality of coexistence good show. 3D for the interest of the people has been spreading throughout the movie which is based on a 3D Avata. 3D TV market of the current conglomerate of changes in the market pioneer in the 3D market, further leap into the era of the upgrade was. At the same time, however, the modern man of the world, if becoming a necessity in the smartphone craze new innovation in the IT market mobile phone market and also has made. A small computer called a smartphone enough, the ripple velocity and the aftermath of the innovation of the telephone, the Internet as much as to leave many issues. Smartphone smart phone is a mobile phone that can be several functions. The current iPhone, Android. In addition to a large number of Windows Phone smartphones are released. Above the overall prospects of the future and a business service model for 3D facial expression as input avatar virtual 3D character on camera on your smartphone camera to recognize a user's emotional expressions on the face of the person is able to synthetic synthesized avatars in real-time to other mobile phone users matching, transmission, and be able to communicate in real-time sensibility fused video communication services to the development of applications.

• Journal of Digital Convergence
• /
• v.10 no.3
• /
• pp.233-240
• /
• 2012

This study aimed to clarify any factors that may have effect on the appropriateness of hospital admission and hospitalization with the intention of facilitating more efficient occupancy of hospital beds and better medical services in the aspect of their quality, minimizing unnecessary occupancy of beds, and ultimately helping patients requiring acute treatments to use immediately hospitals. This paper selected 154 Stroke patients who left neurology department of one general hospital from March, 1, 2006 to September, 31, 2010 as targets to meet the rate according to medical care security and to see the trend of recent 4 years. As study method, this paper analized medical treatment record with AEP to evaluate the appropriateness of hospital admission and stay and the collected data was computerized through SPSS 12.0. Based upon the results above, the conclusion was drawn that the higher appropriateness of hospital admission and the shorter length of hospital stay will lead to the higher appropriateness of hospitalization. In other words, it is required to provide hospitalized patients with all kinds of behaviors including medical treatments and nursing care service, management of pharmaceuticals, tests, rehabilitation and symptoms, as well as instructions and information for patients. Meanwhile, as it was found that the length of hospital stay may affect the appropriateness of hospitalization, the longer length of hospital stay may result in reduced bed turnover rate. In this light, it is necessary to organize a task force team responsible for evaluation and control of the appropriateness of hospitalization and hospital stay length to improve the quality of medical service in a medical center, so that patients can leave the center timely. Ultimately, governmental supports such as expansion of long-term care facilities will reduce the necessary length of hospital stay so that patients with stroke can receive rehabilitative treatments and long-term care service shortly after completion of acute treatments.

• Industry Promotion Research
• /
• v.5 no.3
• /
• pp.61-71
• /
• 2020

The purpose of this paper is to reaffirm the logical framework of the saju analysis method by recreating the saju model of old-law to study and organize the theories of frame in old-law Myeongri, and then by organizing and comparing the logic structure of the saju analysis method of new-law and old-law. Some believe that Myeongri Theory first appeared in the world in the Warring States Period when they were active with Gwigokja and Naknokja as origin, while others believe that it was origin that "Okjokyeong" was written by Kwak-Bak of Eastern Jin after a while. Since then, Myeongri Theory, which had been organized by Won-Cheongang and Yi-Heojung, has undergone a major transformation since reaching the Song Dynasty Seo-Japyeong. Based on this point, the Myeongri Theory of the previous generation is called the Old-law, and the subsequent theory is called the New-law. The changes in the logic structure of the old-law and the new-law leave a big difference and disconnect between those. But comparative studies have confirmed that the philosophy and logic structure due to natural laws that have not changed much such as the symbolic system of nature called Yinyang & five elements and Cheongan-jiji, the idea of a heavenly response projected in the Three Wonders of heaven, earth and human, and the concept of generation and time in the position of year-month-day-time.

• Journal of Distribution Science
• /
• v.11 no.8
• /
• pp.25-30
• /
• 2013

Purpose - Foodservices have grown to over 60% of the franchise industry. However, despite reaching this high level, the foodservice franchise industry is experiencing severe ups and downs. While factors such as expansion by franchises and the entry of large multinational firms are causing this imbalance, the more serious problem faced by franchisees is the lack of know-how and correct operating procedures. Franchise headquarters should advise franchisees on important matters such as food ingredients, interior design, tableware, and fixtures. However, even though franchise headquarters have the ability to impart such management know-how, this is often a neglected area. Research design, data and methodology - This study was conducted in an industrial environment to present suitable competitive alternatives for foodservice franchises. Empirical analysis was conducted using a sample of 232 people with experience in targeting customers. The main purpose of this study is not to identify and analyze the factors affecting customer satisfaction. Customers of the Food Service Industry to invite contacts until departure for the service flow by identifying the expectations and allow this area by analyzing the resulting measures to enhance the competitiveness has presented. Results - Actual results contact factors affecting the quality of service on customer satisfaction was a significant influence. However, the end of this analysis, the actual customer satisfaction directly affects the quality of service that is only important factor can commit mistakes. Relatively large impact on customer satisfaction, which is relatively independent of the quality factor should be a review of zone of tolerance. In this study, eating phase relative to contact the service customer satisfaction was the most influential. The results, however, zone of tolerance for an area in the waiting and ordering dissatisfaction factors are appearing. And in the course of these services outside the zone of tolerance area is unsatisfactory evaluation is being done. Conclusions - After all, Foodservice, the contact service management for zone of tolerance the top priority should be can be seen. Foodservice contact first in the case of service quality factors caused by the continuous flow of services, so this step-by-step identification needs to be clearer. This, of course, to distinguish between the actual per unit of activity appears to be more difficult to follow, for it seems to need a lot of future complementary. Next is the assessment of customer service quality. Customers remember the experience for the services of a real contact through the assessment and service evaluation clearly emerge as the expected level can be difficult. However, this situation is controlled by the test method cannot be avoided unless there is no limit to the number of leave. Despite these limitations, the next step to contact a service evaluation and analysis have to continue to refine and thereby franchisees for the operation of the store in terms of practical know-how required to provide to the office believe.

• Management & Information Systems Review
• /
• v.39 no.2
• /
• pp.127-143
• /
• 2020

As customers' irrational, rude behaviors are often covered by media recently, the issue is becoming a more serious social issue. Workers' stress in the service industry is very severe because they have to face and interact with customers with rude behaviors in-person due to the nature of the job. As a result of customers' rude behaviors, workers even desire to leave their organization because they feel doubts about their job and have negative emotions such as unpleasantness, depression, and fear. Considering that customers' rude behaviors directly impact service industry workers' ability to offer proper service, it is necessary to have appropriate measures against their rude behaviors. This research examined the impact of customers' rude behaviors on service industry workers' emotional dissonance, its impact on job stress, and the impact of job stress on organizational deviance, life violations and creativity. The study also analyzed the moderating effects of stress management education in emotional dissonance and job stress relationship to device ways to manage job stress more positively. To collect data, the study conducted a survey on medical service workers in the customer service sector of large general hospitals and small or medium-sized hospitals in Busan, and the results were as follows. First, rude behaviors had a significant positive(+) effect on emotional dissonance, which had a significant positive(+) effect on job stress. Third, job stress had a significant positive(+) effect on both organizational deviance an life violations. Fourth, job stress had a negative(-) significant effect on creativity. Fifth, there was no moderating effect of stress management education in the relationship between emotional dissonance and job stress.

• Korean Journal of Soil Science and Fertilizer
• /
• v.1 no.1
• /
• pp.125-128
• /
• 1968

The effect of number of leaf after heading time on the growth of residual part and translocation of carbohydrates were investigated with water culture condition. Mutual shading and root rot were prevented. The results may be summerized as follows; 1. The ratio of ripened grain in the plot of no-leaf, flag leaf, two-leaf(flag and 2nd leaf) and three-leaf (flag, 2nd and 3rd leaf) was 38.8, 74.7, 83.9 and 87.0% respectively. The thousand grain weight was 21.3g, as the lowest value in no-leaf plot and was 28.7g in all other plots. 2. The accumulation of carbohydrate translocated in culm was increased by increment of leave-cutting, whereas the weight of culm was decreased. 3. It was suggested that healthy flag and 2nd leaf can keep the ratio of ripened grain around 80 percent.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.25 no.5
• /
• pp.1123-1129
• /
• 2015

Macro(automatic hunting) of mobile game is a program that touch the screen by defined rules like a game bot in PC online games, and it is used by make various ways like android application or windows application program. This gives honest users deprivation and make to lose their interest. Finally they would leave the game and gradually game life would be shorten. Although many studies to prevent these problems in PC online game are conducted, applying mobile game to PC's way is difficult because mobile games are limited to use the network and device performance is different with PC. In this paper, we propose a framework for macro detection by using the touch event information. A touch event on the mobile game is a necessary control command to the game. Because macro touches the screen with the same pattern, there is a difference between normal user's behavior and macro's operation. In mobile games that casual games are mostly, Touch event is the best difference that identify normal user against macro for a short period of time. As a result of detecting macros used in real mobile game by using the proposed framework it showed 100% accuracy and 0% false positive rate.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.6
• /
• pp.427-434
• /
• 2019

In the present study, we assessed the parallel computing performance of Agisoft Metashape for orthomosaic generation, which can implement aerial triangulation, generate a three-dimensional point cloud, and make an orthomosaic based on SfM (Structure from Motion) technology. Due to the nature of SfM, most of the time is spent on Align photos, which runs as a relative orientation, and Build dense cloud, which generates a three-dimensional point cloud. Metashape can parallelize the two processes by using multi-cores of CPU (Central Processing Unit) and GPU (Graphics Processing Unit). An orthomosaic was created from large UAV (Unmanned Aerial Vehicle) images by six conditions combined by three parallel methods (CPU only, GPU only, and CPU + GPU) and two operating systems (Windows and Linux). To assess the consistency of the results of the conditions, RMSE (Root Mean Square Error) of aerial triangulation was measured using ground control points which were automatically detected on the images without human intervention. The results of orthomosaic generation from 521 UAV images of 42.2 million pixels showed that the combination of CPU and GPU showed the best performance using the present system, and Linux showed better performance than Windows in all conditions. However, the RMSE values of aerial triangulation revealed a slight difference within an error range among the combinations. Therefore, Metashape seems to leave things to be desired so that the consistency is obtained regardless of parallel methods and operating systems.