• The Journal of the Acoustical Society of Korea
• /
• 제25권2E호
• /
• pp.43-48
• /
• 2006

Abstract-Using the recursive generalized eigendecomposition method, we develop a recursive form solution to the data least squares (DLS) problem, in which the error is assumed to lie in the data matrix only. Simulations demonstrate that DLS outperforms ordinary least square for certain types of deconvolution problems.

• 전기학회논문지
• /
• 제57권5호
• /
• pp.866-874
• /
• 2008

Motor frequency can be measured by a hall sensor. Among the many hall sensors, a linear type hall sensor is good at high accuracy frequency measuring problem. However, in general, this linear type hall sensor has DC offset which can vary along sensor's operating voltage change. Therefore, In motor frequency measurement problem using the linear hall sensor, it needs an estimator that can estimate frequency and DC offset simultaneously. In this paper, we propose the least mean square estimator to estimate motor frequency. To verify its performance, we compare the LMS estimator with a commercial analog tachometer. Experimental results shows the proposed LMS estimator works well in varying frequency and stationary DC offset.

• Journal of Information Processing Systems
• /
• 제15권4호
• /
• pp.748-764
• /
• 2019

In order to deal with the filtering delay problem of least mean square adaptive filter noise reduction algorithm and music noise problem of spectral subtraction algorithm during the speech signal processing, we combine these two algorithms and propose one novel noise reduction method, showing a strong performance on par or even better than state of the art methods. We first use the least mean square algorithm to reduce the average intensity of noise, and then add spectral subtraction algorithm to reduce remaining noise again. Experiments prove that using the spectral subtraction again after the least mean square adaptive filter algorithm overcomes shortcomings which come from the former two algorithms. Also the novel method increases the signal-to-noise ratio of original speech data and improves the final noise reduction performance.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제50권7호
• /
• pp.350-353
• /
• 2001

In general, the Least Square Error method is used for signal classification to measure distance in the $l^2$ metric or the $L^2$ metric space. A defect of the Least Square Error method is that it does not classify properly some waveforms, which is due to the property of the Least Square Error method: the global analysis. This paper proposes a new linear operator, the Integra-Normalizer, that removes the problem. The Integra-Normalizer possesses excellent property that measures the degree of relative similarity between signals by expanding the functional space with removing the restriction on the functional space inherited by the Least Square Error method. The Integra-Normalizer shows superiority to the Least Square Error method in measuring the relative similarity among one dimensional waveforms.

• The Journal of the Acoustical Society of Korea
• /
• 제26권2E호
• /
• pp.63-68
• /
• 2007

Using the neural network model for oriented principal component analysis (OPCA), we propose a solution to the data least squares (DLS) problem, in which the error is assumed to lie in the data matrix only. In this paper, we applied this neural network model to channel equalization. Simulations show that the neural network based DLS outperforms ordinary least squares in channel equalization problems.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2401-2405
• /
• 2008

In the present study, a three-dimensional least square/level set based two-phase flow code was developed for the simulation of three-dimensional sloshing problems using finite element discretization. The present method can be utilized for the analysis of a free surface flow problem in a complex geometry due to the feature of FEM. Since the finite element method is employed for the spatial discretization of governing equations, an unstructured mesh can be naturally adopted for the level set simulation of a free surface flow without an additional load for the code development except that solution methods of the hyperbolic type redistancing and advection equations of the level set function should be devised in order to give a bounded solution on the unstructured mesh. From the numerical experiments of the present study, it is shown that the proposed method is both robust and accurate for the simulation of three-dimensional sloshing problems.

• Journal of applied mathematics & informatics
• /
• 제6권3호
• /
• pp.757-770
• /
• 1999

We analyse in this paper the possibility of using preconditioning techniques as for square non-singular systems, also in the case of inconsistent least-squares problems. We find conditions in which the minimal norm solution of the preconditioned least-wquares problem equals that of the original prblem. We also find conditions such that thd Kaczmarz-Extendid algorithm with relaxation parameters (analysed by the author in [4]), cna be adapted to the preconditioned least-squares problem. In the last section of the paper we present numerical experiments, with two variants of preconditioning, applied to an inconsistent linear least-squares model probelm.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.565-567
• /
• 2008

In the present study, a least square/level set based two-phase flow code has been developed using finite element discretization, which can be utilized for the analysis of a free surface flow problem in a complex geometry. Since the finite element method is employed for the spatial discretization of governing equations, an unstructured mesh can be naturally adopted for the level set simulation of a bubble-in-liquid flow without an additional load for the code development except that solution methods of the hyperbolic type redistancing and advection equations of the level set function should be devised in order to give a bounded solution on the unstructured mesh. For the discretization of hyperbolic type redistancing and advection equations, least square method is adopted. From the numerical experiments of the present study, it is shown that the proposed method is both robust and accurate.

• 한국전자파학회논문지
• /
• 제21권4호
• /
• pp.427-432
• /
• 2010

셀룰러 시스템에서의 음영 지역 해소 및 전송 용량 증대를 위해 중계기의 중요성은 계속적으로 증가하고 있다. 그러나 RF 중계기는 중계된 전송 신호의 일부가 궤환되어 다시 수신 안테나에 수신되는 궤환 간섭 신호가 발생한다. 이런 문제를 해결하기 위하여 본 논문에서는 RF 중계기의 성능 개선을 위해 상관도를 적용한 Sign-Sign LMS(Least Mean Square)를 제안하였다. 기존 알고리즘의 제곱된 에러를 최소화하기 위해 가중치 벡터는 입력 신호와 오차 신호의 부호에 취하고, 이를 활용하여 갱신된다. 제안된 간섭 제거기는 기존 방식과 비교하여 MSE(Mean Square Error) 측면에서 최대 10 dB의 성능 이득을 가진다.

• Journal of the Korean Data and Information Science Society
• /
• 제22권3호
• /
• pp.537-547
• /
• 2011

In this article, we propose an estimation procedure for the treatment eect for the right censored data. We apply the least square method for deriving the estimation equation and obtain an explicit formula for an estimation. Then we consider some asymptotic properties with derivation of the asymptotic normality for the estimate. Finally we illustrate our procedure with an example and discuss some interesting aspects for the estimation procedure.