• 벤처창업연구
• /
• 제7권1호
• /
• pp.189-206
• /
• 2012

최근 탈공업화와 산업의 서비스화로 서비스산업 뿐만 아니라 제조업 등 2차 산업에 있어서의 서비스 비중은 나날이 커지고 있어 금융 및 서비스업 그리고 제조업의 사무 서비스부문의 경영혁신이 절실한 실정이다. 급변하는 경영환경에 적극적으로 대처하기 위해 기업들은 여러 가지 경영혁신 방법을 도입하고 있다. 특히, 우리나라의 경우에는 선진기업의 혁신활동에 대해서는 유행적으로 도입하여 적용하고 있는 실정이다. 이러한 측면에서 1990년대 중반부터 6시그마(Six Sigma)가 도입되어 10년 이상을 경영혁신활동의 대명사가 되어 활발하게 추진하여 왔다. 그러나 6시그마는 도입 초기의 기대에 미치지 못하고 있다는 지적과 최근 들어 한국기업이 금융시장의 불안, 경기 침체 및 중국 등 후발 국가로부터 많은 도전을 받고 있는 상황에서 '린(Lean)' 이라는 혁신활동이 국내에 소개되고, 도요타자동차의 성장으로 린의 모태인 도요타 생산방식(Toyota Production System, TPS)이 다시 각광을 받으면서 린에 대한 관심이 집중되고 있다. 본 연구에서는 우선 린 경영의 진화과정 및 특징의 기존 연구를 고찰하고 제조부문과 사무 서비스부문과의 차이점을 비교 연구하였다. 다음으로 우리나라 기업의 혁신 담당자를 대상으로 설문조사를 실시한 다음, 사무 서비스부문에서의 린 적용에 대한 실행 모델을 제시하고 적용하였다. 그 동안 제조부문에서는 린에 대한 성공사례도 많고 이와 관련된 연구 또한 많이 수행되어 왔다. 그러나 사무 서비스부문에서의 린 적용에 대한 연구는 아직 그 활용이 초기 단계로 관련 연구가 많지 않은 상태이며 실증연구는 거의 찾아보기 어려운 실정이다. 본 연구는 린 경영의 이론적 고찰을 바탕으로 린 경영의 성공요인을 도출하고 기업에서 실질적으로 린을 추진하고 있는 추진자들을 대상으로 실증 연구를 하였다. 이는 린 경영이 최근 우리나라에 도입되고 있는 상황에서 어느 정도 향도로서의 역할을 할 수 있을 것으로 판단한다. 본 연구는 린을 적용하고 있는 기업 또는 경쟁력 강화를 위해 새롭게 린 경영 도입을 검토하고 있는 기업 및 동 주제에 대한 연구자들에 대하여 사무 서비스부문에서 효율적이고 성공적인 린 경영 추진을 위한 올바른 방향을 제시했다는데 의의가 있다 하겠다.

• 한국연소학회지
• /
• 제15권3호
• /
• pp.8-14
• /
• 2010

Fuel processing systems which convert fuel into rich gas (such as stream reforming, partial oxidation, autothermal reforming) need high temperature environment ($600{\sim}1,000^{\circ}$). Generally, anode-off gas or mixture of anode-off gas and LNG is used as input gas of fuel reformer. In order to make efficient and low emission burner system for fuel reformer, it is necessary to elucidate the combustion and emission characteristic of fuel reformer burner. The purpose of this study is to develop a porous premixed flat ceramic burner that can be used for 1~5 kW fuel cell reformer. Ceramic burner experiments using natural gas, hydrogen gas, anode off gas, mixture of natural gas & anode off gas were carried out respectively to investigate the flame characteristics by heating capacity and equivalence ratio. Results show that the stable flat flames can be established for natural gas, hydrogen gas, anode off gas and mixture of natural gas & anode off gas as reformer fuel in the porous ceramic burner. For all of fuels, their burning velocities become smaller as the equivalence ratio goes to the lean mixture ratio, and a lift-off occurs at lean limit. Flame length in hydrogen and anode off gas became longer with increasing the heat capacity. In particular, the blue surface flame is found to be very stable at a very lean equivalence ratio at heat capacity and different fuels. The exhausted NOx and CO measurement shows that the blue surface flame represents the lowest NOx and CO emissions since it remains very stable at a lean equivalence ratio.

• 농업과학연구
• /
• 제50권4호
• /
• pp.629-643
• /
• 2023

The purpose of this study was to examine the effectiveness and efficiency of a policy by comparing and analyzing the impact of the rice market isolation system and production adjustment system (strategic crops direct payment system that induces the cultivation of other crops instead of rice) on rice supply, rice price, and government's financial expenditure. To achieve this purpose, a rice supply and demand forecasting and policy simulation model was developed in this study using a partial equilibrium model limited to a single item (rice), a dynamic equation model system, and a structural equation system that reflects the casual relationship between variables with economic theory. The rice policy analysis model used a recursive model and not a simultaneous equation model. The policy is distinct from that of previous studies, in which changes in government's policy affected the price of rice during harvest and the lean season before the next harvest, and price changes affected the supply and demand of rice according to the modeling, that is, a more specific policy effect analysis. The analysis showed that the market isolation system increased government's financial expenditure compared to the production adjustment system, suggesting low policy financial efficiency, low policy effectiveness on target, and increased harvest price. In particular, the market isolation system temporarily increased the price during harvest season but decreased the price during the lean season due to an increase in ending stock caused by increased production and government stock. Therefore, a decrease in price during the lean season may decrease annual farm-gate prices, and the reverse seasonal amplitude is expected to intensify.

• 대한산업공학회지
• /
• 제42권2호
• /
• pp.80-85
• /
• 2016

This study suggests a process design using cognitive processes. Job characteristic model for job design and recent cognitive engineering studies for process design are reviewed briefly. By using these concepts, the lean production system is re-interpreted in terms of cognitive engineering and the latent dimensions of the lean production system are revealed as the application of cognitive engineering principles. An integrated process design framework for cognitive manufacturing system using job characteristic model is suggested for the effective design of manufacturing system. Propositions for empirical analysis of this model are also analyzed through a questionnaire survey. Propositions are (1) experiential cognition and motivation potential affect the ability, role perception, and need for achievement of the operator in the manufacturing system, (2) the ability, role perception, and need for achievement of the operator affect the job performance. Both propositions are supported by correlation analysis and path analysis.

• 한국연소학회지
• /
• 제1권1호
• /
• pp.65-73
• /
• 1996

Flame propagation in a four-valve spark-ignition optical engine was visualized under lean-bum conditions with A/F=18 at 2000rpm. The early flame development in a four-valve pentroof-chamber single-cylinder engine was examined with imaging of the laser-induced Mie scattered light using an image-intensified CCD camera. Flame profiles along the line-of-sight were also visualized through a quartz piston window. Two-dimensional flame structures were visualized with a Proxitronic HF-1 fast motion camera system by Mie scattering from titanium dioxide particles along a planar laser sheet generated by a copper vapor laser. The flame propagation images were subsequently analysed with an image processing programme to obtain information about the flame structure under different tumble flow conditions generated by sleeved and non-sleeved intake ports. This allowed enhancement of the flame images and calculation of the enflamed area, and the displacement of its center, as a function of the tumble flow induced by the pentroof-chamber in the vicinity of spark plug. Image processing of the early flame development quantified the correlation between flame and flow characteristics near the spark plug at the time of ignition which has been known to be one of the most important factors in cyclic combustion variations in lean-burn engines. The results were also compared with direct flame images obtained from the natural flame luminosity of the lean mixture.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권3호
• /
• pp.475-481
• /
• 2004

Recently it is strongly required on lower fuel consumption. lower exhaust emission, higher engine performance. and social demands in a spark ignition gasoline engine. In this study. the experimental engine used at test. it has been modified the lean burn gasoline engine. and used the programmable engine management system, and connected the controller circuit which is designed for the engine control. At the parametric study of the engine experiment, it has been controlled with fuel injection, ignition timing. swirl mode, equivalence ratio engine dynamometer load and speed as the important factors governing the engine performance adaptively. It has been found the combustion characteristics to overcome the hysteresis phenomena between normal and lean air-fuel mixing ranges. by mean of the look-up table set up the mapping values. at the optimum conditions during the engine operation. As the result, it is found that the strength of the swirl flow with the variation of engine speed and load is effective on combustion characteristics to reduce the bandwidth of the hysteresis regions. The results show that mass fraction burned and heat release rate pattern with crank angle are reduced much rather, and brake specific fuel consumption is also reduced simultaneously.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.155-160
• /
• 2001

The low NOx characteristics have been investigated to develop the combustor for micro turbine. The lean premixed combustion technology was applied to reduce the NOx emission. The test was conducted at the condition of high temperature and ambient pressure. The combustion air which has the temperature of $450\sim650K$ were supplied to the combustor through the air preheater. The temperature and emissions of NOx and CO were measured at the exit of combustor, The exit temperature and NOx were increased and CO was decreased with increasing inlet air temperature. The premixing chamber can be operated very lean condition of equivalence ratio around 0.35. The NOx was decreased with decreasing the equivalence ratio. The CO was decreased with decreasing the equivalence ratio, but the CO was increased with decreasing the equivalence ratio below 0.4. But, at the very lean condition of equivalence ratio below 0.35 both NOx and CO were increased because of the flame unstability. The NOx was decreased and CO was increased with increasing inlet air flowrate. This results can be used to determine the size of combustor. Consequently the performance of combustor shows the possibility of the application to the gas turbine system.

• 한국도로학회논문집
• /
• 제15권1호
• /
• pp.11-21
• /
• 2013

PURPOSES: As pavement generally provides service shorter than an expected life cycle, maintenance cost increases gradually. In order to help extending the service life and reduce maintenance cost, a new multi-functional composite pavement system is being developed in Korea. METHODS: This study is a part to develop the multi-functional composite pavement and is to investigate the mechanical performances of fiber-reinforced lean concrete for pavement subbase. The inherent problem of fiber reinforced concrete is dispersion of fibers in concrete mix. This study additionally evaluated fiber dispersion characteristics with respect to different fiber types. RESULTS: From the test results, the compressive strengths of the concretes satisfied the required limit of 5MPa at 7days. The standard deviation of the measured number of fibers were lower in the order of nylon, steel fiber and polypropylene. CONCLUSIONS: Reject ash was shown to be satisfactory as a replacement material to Portland cement in lean concrete base. The fiber volume fraction is suggested to be 0.4% even though the fracture toughness did not vary significantly with respect to fiber types. However, fracture energy absorbed up to complete failure increased with the increased fiber volume fraction increment.

• 에너지공학
• /
• 제23권3호
• /
• pp.1-6
• /
• 2014

The more or less homogeneous fuel-air mixture that exists at the end of the compression process is ignited by an electric ignition spark from a spark plug shortly before top dead center. The actual moment of ignition is an optimization parameter; it is adapted to the engine operation so that an optimum combustion process is obtained. Brake mean effective pressure (BMEP) of the spark ignition energy control device (IECD) than conventional spark system at the stoichiometric mixture is increased about 9%. For lean burn engine, the lean limit is extended about 25% by using the IECD. It was considered the stability of combustion by the increase of flame kernel according to the high ignition energy supplies in initial period and discharge energy period lengthen by using the IECD.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1166-1171
• /
• 2004

The combustion instability acts as a serious obstacle for the lean premixed combustion of gas turbine and even causes the fatal damage to the combustor and whole system. In this experiment, the pressure fluctuation is highly related to the stabilizing position of flame and fuel injection location. The fuel injection location is connected with the convection time of the fresh mixture, which is important time scale to refresh the mixtures near the flame stabilization location. The flame is extremely unstable when the alternative stabilization occurs and bulk mode frequency (${\sim}10Hz$) of pressure fluctuation is observed in this condition. It was found that the convection time scale of the fresh reactant coincided with the time scale of the bulk mode fluctuation. Hence this phenomenon results from the local equivalence ratio change caused by the pressure fluctuation induced by thermo-acoustic effects.