• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.79.5-79
• /
• 2002

$\textbullet$ Introduction $\textbullet$ Deterioration of wire rope $\textbullet$ Magnetic flux leakage Instrument $\textbullet$ Experiment setup $\textbullet$ Performance of the instrument $\textbullet$ Conclusions

• Transactions on Electrical and Electronic Materials
• /
• v.12 no.2
• /
• pp.43-50
• /
• 2011

Carbon-nanotube metal oxide semiconductor field effect transistor (CN-MOSFET) is a promising future device candidate. The electrical characteristics of 16 nm N-type CN-MOSFETs are explored in this paper. The optimum N-type CN-MOSFET device profiles with different number of tubes are identified for achieving the highest on-state to off-state current ratio ($I_{on}/I_{off}$). The influence of substrate voltage on device performance is also investigated in this paper. Tradeoffs between subthreshold leakage current and overall switch quality are evaluated with different substrate bias voltages. Technology development guidelines for achieving high-speed, low-leakage, area efficient, and manufacturable carbon nanotube integrated circuits are provided.

• Tribology and Lubricants
• /
• v.26 no.6
• /
• pp.322-328
• /
• 2010

An inter-propellant seal (IPS) for 75 ton class thrust turbopump was tested. Leakage characteristics were presented with a given range of pressure difference under cryogenic as well as room temperature conditions. For cryogenic tests, liquid nitrogen was used as analogic fluid of liquid oxygen (LOX) while water was used instead of kerosene for room temperature condition. Test results showed that IPS had satisfactory leakage performance. Additionally endurance test was conducted to prove the life time of manufactured IPS and the tested IPS had successfully survived during required life time, 2100 seconds.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.9 no.3
• /
• pp.148-152
• /
• 2009

Recent CMOS technology scaling has seriously eroded the bit-line noise immunity of register files due to the consequent increase in active bit-line leakage currents. To restore its noise immunity while maintaining performance, we propose and evaluate a $256{\times}40$-bit register file incorporating dual-$V_t$ bit-lines with a boosted gate overdrive voltage in 65 nm bulk CMOS technology. Simulation results show that the proposed bootsrapping scheme lowers leakage current by a factor of 450 without its performance penalty.

• Journal of Energy Engineering
• /
• v.23 no.4
• /
• pp.183-188
• /
• 2014

Solenoid operated electromagnetic control valve (ECV) using in an external variable displacement swash plate type compressor is widely used for air conditioning control system because of its low energy consumption and high efficient characteristics. ECV controls the entire vehicle air conditioning system by means of a pulse width modulation (PWM) system that supplied from an external controller. Different pressure ports located within ECV has important functions to control the air/refrigerant flow through its internal passages. The flow paths are preciously maintained with acceptable ranges of leakage (gap) between the parts inside it which is followed by effective design and critical dimensioning of its internal features. Therefore, it saves energy losses from the solenoid operation as well as ensures the balance of forces within it. The research paper highlights analysis of the leakages (at different pressure ports) and dimensioning tolerance factors that affects the ECV performance.

• Journal of Industrial Technology
• /
• v.35
• /
• pp.41-45
• /
• 2015

This paper presents a development of the ELB (Electronic Leakage Breaker) based on a reduction of standby power dissipation as with maintaining conventional performance. In order to minimize the standby power consumption of the conventional circuit, we analyze the cause of 0.3W dissipation of the circuit. By employing the TR-triggered circuit to secure the standby power of 0.10W after testing and evaluation while CRD inserted circuit showed the performance of 0.17W levels. Implementing SMPS IC and TNR device circuit was designed and showed of its power to less than 0.06W. Developed ELB is expected much standby power savings in large power distributor or heavy users.

• Journal of Advanced Marine Engineering and Technology
• /
• v.22 no.6
• /
• pp.871-879
• /
• 1998

The refrigerator consists of many components such as compressor condenser expansion valve evaporator and the cabinet which filled by urethane foam. In this paper the heat leakage of refriger-ator is measured by the new experiment method which is different from a present method, The devi-ation of the UA(overall heat transfer coefficient times area) between the simulation and experiments is about 7-8%. Using the modeling of various components of refrigeration system a performance analysos of CFC 12 and HFC 134a is performed numerically on the UA. As the results of this study according to increase the heat leakage the refrigeration load and mass flow rate of refrigerant are increased. And the increase of the mass flow rate results in the increase of the condensing and evapo-rating temperature. Therefore according to increase of the heat leakage the COP leads to increase because the increase of refrigeration capacity is larger than the increase if compressor power.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2006.05a
• /
• pp.177-180
• /
• 2006

The accidents of oil leakage is increasing in the Underground Concrete structures for Oil Storege. In the result, the waterproofing in the underground structures is melt down and cannot fulfil its Performance. This study shows an experimental study in the effects of the oil leakage to on the performance of Waterproofing Materials. In order to investigate the actual condition and the problems, a comparative analyses were conducted considering the various types of leakage. Utilizing the obtained results at the basic data for test methods and the standard of quality, we intended to propose a strategy to develop an innovated waterproofing Materials and improve the clean environment of underground structures.

• Journal of the Regional Association of Architectural Institute of Korea
• /
• v.20 no.6
• /
• pp.55-61
• /
• 2018

This study improved the water repair materials of the polyacrylic system applied to concrete structures by controlling expansion, strengthening water resistance, and improving cohesiveness. The improved polyacrylate repair materials were evaluated against the existing products to verify their performance and level of improvement, and applied on-site to the concrete structures that are leaking the improved water. The verification method measured the presence of water leaks and the moisture content of concrete inside. Moisture levels were measured for two months before and after material installation, and at least 0.8 - 1.7% of humidity was reduced after installing polyacrylic resin, and no leakage was found.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.11a
• /
• pp.50-51
• /
• 2020

Recently, various maintenance materials and construction methods have been developed to secure the sustainable performance of structures. However, waterproofing of underground structures where groundwater infiltration is present is very difficult. In particular, the location of underground structures such as subways is very deep, and it is difficult to apply waterproof materials and construction methods in the case of structures accompanied by vibration. Therefore, we intend to study materials and methods for waterproofing leakage resistance in special environments such as underground structures.