• 한국유체기계학회 논문집
• /
• 제5권2호
• /
• pp.22-28
• /
• 2002

Steady state flow calculations are conducted for the newly-designed turbo-pump inducers to validate the performance of Tascflow code. Hydrodynamic performance is evaluated, and structures of the passage flow and leading edge recirculation are also investigated. The calculated results show good coincidence with the experimental data of the static pressure performance and velocity profiles near the leading edge. Upstream recirculation, tip leakage and vortex flow at the blade tip and near leading edge are main sources of pressure losses. Amount of pressure losses from the upstream to the leading edge corresponds to that of pressure losses through the whole blade. The total viscous losses are considerably large due to the strong secondary flow.

• 한국항공우주학회지
• /
• 제35권7호
• /
• pp.655-660
• /
• 2007

카나드 형상 전투기급 항공기 기동성을 증대시키기 위하여 카나드-앞전플랩 스케줄링 법칙을 수립하였다. 이러한 카나드-앞전플랩 스케줄 법칙은 양항비를 최대로 하는 카나드-앞전플랩 변위각과 비행조건과의 관계이다. 이러한 목적으로 고속 영역에서 카나드-앞전플랩 변위각에 의한 양항특성을 예측하기 위하여 보정된 초음속 패널 방법을 사용하였다. 또한 예측된 스케줄링 법칙을 확인하기 위하여 1/20 시험 모형을 이용한 고속 풍동시험을 수행하였다. 고속 풍동시험 결과와 비교 시 초음속 패널 수치해석적 결과는 잘 일치하였다. 실험 및 수치 해석적 연구 결과를 기초로, 제시된 보정된 초음속 패널 방법은 카나드형상 전투기급 항공기 공력설계를 위한 카나드-앞전플랩 스케줄링 법칙 수립에 유용한 것으로 확인되었다.

• Tribology and Lubricants
• /
• 제34권1호
• /
• pp.16-22
• /
• 2018

Cylindrical turbine guide bearings (TGBs) with simple plain pads have conventionally been used in vertical hydro-power turbine-generator applications in order to provide turbine runner shafts with smooth rotation guides and supports. To overcome low-load/low-eccentricity performance drawbacks, such as very low film stiffness and lack of design credibility in the stiffness values themselves, of conventional cylindrical TGBs, the introduction of a rotational-directional leading-edge taper to each partitioned pad, simply pad leading-edge taper, has been found to be very effective in enhancing their design-application availability and usefulness. In this study, we investigate the effects of taper angle and length for given taper heights in detail in order to systematically establish the effectiveness of design on the performance improvement of vertical hydro-power application cylindrical TGBs with pad leading-edge tapers. The analysis results with $4-Pad{\times}1-Row$ cylindrical TGBs show that the lubrication performance of the cylindrical TGBs is optimized with an approximate taper angle ratio of 0.8 and taper length ratio of 0.9. We conclude that the introduction of pad leading-edge tapers along with the optimization of taper designs can be very effective in improving the overall operation reliability of cylindrical TGBs and the rotordynamic characteristics of vertical hydro-power turbine-generator rotor-bearing systems as well, to which the TGBs are applied.

• 대한조선학회지
• /
• 제26권3호
• /
• pp.41-50
• /
• 1989

2차원 날개 단면 주위 유동문제를 포텐셜장에서의 표면양력판이론에 의하여 해석하였고 수치해석 효율을 증대시키기 위한 방법을 제시하였다. 날개 뒷날에서 유동이 쐐기 주위의 유동과 유사하다는 특성을 이용하여 계산효율을 증대시키기 위한 쐐기형 쿠타 조건(wedge type Kutta condition)을 제시하였다. 또한 쐐기형 계산효율을 증대시키기 위하여 세부 분할 방법을 적용하였다. 즉 날개 뒷날 부근의 4개의 양력판을 세분하고 세분된 양력판에서의 다이폴세기는 쐐기 주위 유동특성을 따르게 하였다. 세부분할 방법에 의한 쐐기형 쿠타조건을 2차원 날개단면 문제에 적용하였을 경우 수치계산 효율이 증가됨이 보였다. 날개 앞날에서의 유동은 앞날 반경(leading edge radius)을 갖는 원에 접하는 포물선(osculating parabola) 주위의 유동과 유사하다는 특성을 이용하여 비교적 적은 양력판 갯수에 의한 계산결과로부터 날개 앞날 주위의 유동을 정확히 계산하였다. 날개 앞날 주위의 급격한 유동변화를 정확히 계산함으로써 캐비테이션 발생 문제 및 날개 주위 경계층 문제를 계산하기 위한 정도 높은 입력자료를 제공할 수 있게 되었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.631-636
• /
• 2001

The internal flow in the rocket pump inducer of LE-7 engine for H-II rocket was predicted at design and off-design flow rates using CFD code, CFX- Tascflow. In this numerical study, the performance curve of inducer coressponding to flow rates variation and the internal flow in the front of blade leading edge show good agreement between the calculations and the measurements. Backflow is appeared at suction side of leadinge edge tip, and this region is extended to upstream as flowrate decrease. Because of backflow, pressure loss coressponding to meridinal coordinate occupy 50% from inlet domain to leading edge. By this phenomena, pressure loss in front of blade leading edge take a great effect to inducer performance.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.422-427
• /
• 2000

The design of low-solidity vaned diffusers and the effect on the performance of a turbocharger compressor is discussed. The effect of vane number and turning angle was investigated while maintaining a basic design with a leading edge angle of $70^{\circ}$, leading and trailing edge radius ratios of 1.1 and 1.3. All results are compared with those obtained with the standard vaneless diffuser configuration and it was shown that all designs increased and shifted the pressure ratio to reduced flowrates. Despite the low-solidity configuration none of the vane designs provided a broad operating range, and the vane leading edge angle was not main factor that system went into the surge condition. The diffuser of higher trailing edge angle improved the flow range for the compressor to operate at lower flow region.

• 한국연소학회지
• /
• 제18권1호
• /
• pp.13-20
• /
• 2013

Leading edge statistics are obtained by direct numerical simulation(DNS) of freely propagating incompressible and stagnating compressible turbulent premixed flames. Conditional averages of velocities in terms of reaction progress variable, c, and local flame surface density, ${\sum}^{\prime}_f$, are defined and compared through the flame brush. It holds asymptotically that $<u>_f=<S_d>_f$ and $<u>_u-<u>_b=D_t/L_w$ with the characteristic length scale of $\bar{c}$ variation, $L_w$. It also holds that $<u>_b=<u>_f$ for a freely propagating flame under no mean strain rate. The turbulent burning velocity, $S_T$, is determined by the conditional statistics at the leading edge under large activation energy.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.388-393
• /
• 2001

An experimental study is conducted to investigate the interaction of vortices over a delta wing with leading edge extension(LEX) through the off-surface flow visualization and the 5-hole probe measurements of the wing wake region. Especially, the application of a new visualization technique is employed by ultrasonic humidifier water droplet and laser beam sheet. The results, both the off-surface visualization and the 5-hole probe, show that LEX tends to stabilize the vortices of the delta wing up to the high angle of attack even though the model is yawed. With increasing yaw, the windward leading edge vortex moves inward, and closer to the wing surface, while the leeward vortex moves outwards and away from the wing surface. The vortex interaction is promoted in the windward side, and is delayed in the leeward side.

• 대한기계학회논문집
• /
• 제18권2호
• /
• pp.479-491
• /
• 1994

Discrete vortex method was applied for simulating an active control of turbulent leading- edge separation bubble. The leading-edge separation zone was perturbed by a time-dependent sinusoidal perturbation of different frequencies and levels. In order to describe the local sinusoidal perturbation at the separation point, a source pulsation vortex technique was proposed. The present two-dimensional vortex simulations were qualitatively compared with the experimental results for a blunt circular cylinder, where perturbation was introduced along the square-cut leading edge of the cylinder $(Kiya et al.^{(6,7)}).$ It was found that the reattachment length attained a minimum point at low levels of perturbation and two minima at a moderate higher perturbation frequency. The effects of local perturbation on the evolution of leading-edge separation bubble were scrutinized by comparing the perturbed flow with the natural flow. These comparisons were made for the distributions of mean velocity and its velocity fluctuations, intermittency and wall velocity. The motions of instantaneous reattachment in the space-time domain were demonstrated, which were also compared with the experimental findings. In order to investigate the reduction mehanism of reattachment length in the separation bubble, various cross-correlations for velocity and pressure and the relevant convection velocities were evaluated. It was observed that the convection velocity was closely associated with its corresponding pulsationg frequency.

• 한국항공우주학회지
• /
• 제37권9호
• /
• pp.829-836
• /
• 2009

말굽와류로 대표되는 3차원 유동현상은 필연적으로 주유동에 대한 2차 유동의 형태로 발생되며, 유동손실을 유발하게 된다. 본 논문에서는 2차유동 손실을 일으키는 주요 요인중의 하나인 말굽와류의 강도를 감쇄시키기 위해 일반적인 날개 앞전에 설치한 판에 대해, 판의 설치 높이, 길이, 폭 및 두께 등의 형상변수를 설계변수로 정하여 이를 최적화하였다. 근사최적설계 기법을 이용 최적화를 수행하였으며, $FLUENT^{TM}$와 $iSIGHT^{TM}$를 이용하였다. 최적화 수행결과, 기준 모델의 경우보다 전압력 계수가 약 7.5% 감소하였다.