• Journal of Korean Institute of Industrial Engineers
• /
• v.31 no.1
• /
• pp.27-35
• /
• 2005

Due to the importance of lead time demand in the design of inventory management systems, researchers and practitioners have paid continuous attention and a few analytic models using the compound distribution approach have been reported. However, since the nature of compound distributions is hardly amenable, the analytic models have been done by non‐recognition of the compound nature of some components to reduce the analytic task. This study concerns some of the important aspects in the analytic models. Through the theoretic examination of the analytic model approach and the comparison with the rigid compound stochastic process approach, this study clarifies the assumptions implicitly made by the analytic models and provides some precautions in using the analytic models. Illustrative examples are also presented.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.6
• /
• pp.549-554
• /
• 2003

The purpose of this paper is to investigate the solder properties by the change of P mass percentage. Tension test, wetting balance test, spread test, and analysis of intermetallic compound after isothermal aging of Sn-2.5Ag-0.7Cu-0.005P, Sn-2.5Ag-0.7Cu-0.01P, Sn-2.5Ag-0.7Cu-0.02P, Sn-0.7Cu-0.005P were performed. Adding P in the solder alloys resulted in improvement of tensile strength, reduction of intermetallic compound growth, reduction of oxidization in fusible solders under wave soldering. After comparing solder alloy containing P with tin-lead eutectic solder alloy, P contained solders alloys showed much better solder properties than eutectic solder alloy. Furthermore, this solder alloy presented remarkable properties than any other lead-free solder alloy.

• Toxicological Research
• /
• v.1 no.1
• /
• pp.49-63
• /
• 1985

The purpose of this study was to investigate whether or not $VATAMIN B_1$ (thiamin hydrochloride) could prevent and/or treat lead posoning in rats. Sprague-Dawley used in this experiment were divided into three group; control group compound group (thiamin 10mg+0.4% lead acetate solution) lead group (0.4% lead acetate solution). The results obtained were summarized as follow; 1. The body weight gain of treated groups (compound group and lead group) were lowered significantly in comparsion with those of control groups (p<0.01). But the significant difference between treated group was not observed (p<0.05).

• Journal of Environmental Science International
• /
• v.32 no.11
• /
• pp.757-765
• /
• 2023

Lead, a heavy metal widely employed in various industries, continues to pose a threat to both human health and the environment. Therefore, the development of a sensor capable of rapidly and accurately detecting lead(II) ions in real-time at contaminated sites is crucial. In this study, we have engineered a fluorescent sensor with the ability to efficiently detect lead(II) ions under actual environmental conditions, including tap water and freshwater. The compound, tetraphenylethylene carboxylic acid derivative (TPE-COOH), exhibits high selectivity and sensitivity toward lead(II) ions in aqueous solution, where the interaction between TPE-COOH and lead(II) ions leads to its aggregation, thus triggering a fluorescence "turn-on" based on the aggregation-induced emission (AIE) mechanism. Impressively, compound TPE-COOH proficiently detects lead(II) ions within a range of 30 to 100 𝜇M in tap water and freshwater, even in the presence of various interfering substances.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.3
• /
• pp.546-550
• /
• 2008

The title compound of nicotinato lead(II) complex [Pb$(C_5H_4NCOO)_2$] has been optimized at B3LYP/LANL2DZ and HF/LANL2DZ levels of theory. The calculated results show that the lead(II) ion adopts 2- coordinate geometry, which is the same as its crystal structure and different from the 4-coordinate geometry of isonicotinato lead(II) complex. Atomic charge distributions indicate that during forming the title compound, each nicotinic acid ion transfers their negative charges to central lead(II) ion. The electronic spectra calculated by B3LYP/LANL2DZ level show that there exist two absorption bands, which have some red shifts compared with those of isonicotinato lead(II) complex and the electronic transitions are mainly derived from intraligand $\pi$ -$\pi$ transition and ligand-to-metal charge transfer (LMCT) transition. CIS-HF method is not suitable for the system studied here. The thermodynamic properties of the title compound at different temperatures have been calculated and corresponding relations between the properties and temperature have also been obtained. The second order optical nonlinearity was calculated, and the molecular hyperpolarizability was $1.147754{\times}10^{-30}$ esu.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.5
• /
• pp.1505-1508
• /
• 2012

Protein tyrosine phosphatase 1B (PTP1B) is a key factor in negative regulation of the insulin pathway, and is a promising target for the treatment of type-II diabetes, obesity and cancer. Herein, compound ($\mathbf{4}$) was first observed to have moderate inhibitory activity against PTP1B with an $IC_{50}$ value of $13.72{\pm}1.53{\mu}M$. To obtain more potent PTP1B inhibitors, we synthesized a series of chalcone derivatives using compound ($\mathbf{4}$) as the lead compound. Compound $\mathbf{4l}$ ($IC_{50}=3.12{\pm}0.18{\mu}M$) was 4.4-fold more potent than the lead compound $\mathbf{4}$ ($IC_{50}=13.72{\pm}1.53{\mu}M$), and more potent than the positive control, ursolic acid ($IC_{50}=3.40{\pm}0.21{\mu}M$). These results may help to provide suitable drug-like lead compounds for the design of inhibitors of PTP1B as well as other PTPs.

• Journal of Welding and Joining
• /
• v.21 no.7
• /
• pp.59-64
• /
• 2003

Microstructure and shear strength of Sn-Zn lead-free solders and Au/Ni/Cu UBM joint under thermal aging conditions was investigated. The samples were aged isothermally at 10$0^{\circ}C$ and 15$0^{\circ}C$ for 300, 600, and 900 hours. The IMCs(Intermetallic Compound) at the interface between solder and UBM were examined by FESEM and TEM. The results showed that the shear strength was decreased with aging time and temperature. The solder ball with high activated RA flux had about 8.2% higher shear strength than that of RMA flux. Poor wetting and many voids were observed in the fractured solder joint with of RMA flux. The decreased shear strengths were caused by IMC growth and Zn grain coarsening. Zn reacted with Au and then was transformed to the $\beta$ -AuZn compound. Although AuZn grew first, $r-Ni_5Zn_{21}$ compounds were formed with aging time. The layers indicated by $Ni_5Zn_{21}(1)$, (2), and (3) were formed with the thickness of ∼0.7 ${\mu}{\textrm}{m}$, ∼4 ${\mu}{\textrm}{m}$, and ∼2 ${\mu}{\textrm}{m}$, respectively.

• Progress in Superconductivity and Cryogenics
• /
• v.4 no.1
• /
• pp.30-34
• /
• 2002

In this Paper, Insulation of current lead in the conduction-cooled DC reactor for the 1.2kV class 3 high-Tc superconducting fault current limiter(SFCL) is studied. Thermal link which conducts heat energy but insulates electrical energy is selected as a insulating device for the current lead in the conduction-cooled Superconducting DC reactor. It consists of oxide free copper(OFC) sheets, Polyimide films, glass fiberglass reinforced Plastics (GFRP) plates and interfacing material such an indium or thermal compound. Through the test of dielectric strength in L$N_2$, polyimide film thickness of 125 ${\mu}{\textrm}{m}$ is selected as a insulating material. Electrical insulation and heat conduction are contrary to each other. Because of low heat conductivity of insulator and contact area between electrical insulator and heat conductor, thermal resistance of conduction-cooled system is increased. For the reducing of thermal resistance and the reliable contact between Polyimide and OFC, thermal compound or indium can be used As thermal compound layer is weak layer in electrical field, indium is finally selected for the reducing of thermal resistance. Thermal link is successfully passed the test. The testing voltage was AC 2.5kVrms and the testing time was 1 hour.

• Proceedings of the Korean Biophysical Society Conference
• /
• 2003.06a
• /
• pp.42-42
• /
• 2003

Large-conductance $Ca^{2+}$-activated potassium channels ($BK_{Ca}$ are a widely distributed and play key roles in various cell functions. In nerve cells, $BK_{Ca}$ channels shorten the duration of action potentials and block $Ca^{2+}$ entry thereby repolarizing excitable cells after excitation. $BK_{Ca}$ channel opening has been postulated to confer neuroprotection during stroke, and has attracted attention as a means for therapeutic intervention in asthma, hypertension, convulsions, and traumatic brain injury. Several natural and synthetic compounds including a steroid hormone, $\beta$-estradiol, have been identified as the activators of $BK_{Ca}$ channels. Based on the structural features of the previously reported activators of $BK_{Ca}$ channels, we designed several lead compounds, synthesized chemically, and tested their functional activity on cloned $BK_{Ca}$ channels. The $\alpha$ subunit of rat $BK_{Ca}$ channel was expressed alone or with different $\beta$ subunits in Xenopus oocytes and the effects of the compounds were tested electrophysiological means. One of the lead compounds affected the activity of the $\alpha$ subunit of $BK_{Ca}$ channel in a $\beta$ subunit-specific manner. While the activity of B $K_{ca}$ channel $\alpha$ subunit was Potentiated, the channel composed of $\alpha$ and $\beta$1 subunits were inhibited by this compound. We are currently investigating the mechanism of the $\beta$ subunit-dependent effects and planning to localize the receptor site of the lead compound.f the lead compound.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2002.05a
• /
• pp.104-108
• /
• 2002

This paper was investigated the lead free solder characteristics by P mass percentage chang e. Tension test, wetting balance test, spread test, and analysis of intermetallic compound after isothermal aging of Sn-2.5Ag-0.7Cu-0.005P, Sn-2.5Ag-0.7Cu-0.01P, Sn-2.5Ag-0.7Cu-0.02P, Sn-0.7Cu-0.005P were performed for estimation. By adding P on the solder alloys, it was showe d improvement of tensile strength, reduction of intermetallic compound growth and reduction of oxidization of fusible solder under wave soldering processes. After comparing solder alloy containing P with tin lead eutectic solder alloy, p containing solder alloys showed much better solderability than eutectic solder alloys.