• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.312-315
• /
• 2002

This paper summarizes the results of a numerical study conducted to analyze the effect of selected process parameters on material flow and thread profile in thread rolling of large diameter blanks. Based on the previous work where a plane strain mode was found to provide a reasonable approximation of the thread rolling process, the effect of varying thread form, friction factor, flow stress, and blank diameter on effective strain and thread height was analyzed using the finite element code DEFORM. This study show that effective strain for flank angle, that blank diameter had important effect on the as-rolled thread while flow stress, friction factor, and crest round of dies had significant impact on effective strain at the thread root and crest and load of thread rolling. While the rate of strain harding was found to have an effect on the crest profile, the results indicate that it is the primary factor responsible for seam formation in rolled threads.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.802-804
• /
• 2002

An analysis of the skeleton type BLDC motor is presented. The single phase skeleton type BLDC motor consists of the stator, rotor with the permanent magnet, and drive circuit with hall sensors that detect the rotor position. The major factors for the initial starting, efficiency, and torque ripples of the skeleton type BLDC motor are the detent groove of the stator and the lead angle of the phase voltage. The performance characteristics according to the angle and height of the detent groove is analyzed. The optimum lead angles of the phase voltage with the torque ripple and motor efficiency is described using the finite element method.

• 한국응용과학기술학회지
• /
• 제21권2호
• /
• pp.164-173
• /
• 2004

The capacity and long life of gel electrolyte batteries is connected with gas recombination producting $PbO_2$ and Pb electrode. We prepared with sulfuric acid gel electrolyte to know gel characteristics per density to assemble valve regulated lead-acid (VRLA) batteries. We studied on actions of sulphuric acid gel electrolyte by measuring electrolyte dispersion using Brewster-angle microscope (BAM), charge-discharge cycle, and electrode structure using scanning election microscope (SEM). Sulphuric acid density 1.210 showed excellent gel dispersion in sol condition, electrode condition after fifty cycles in this study.

• 대한방사선기술학회지:방사선기술과학
• /
• 제4권1호
• /
• pp.63-71
• /
• 1981

The metal-plates(Aluminium. Copper, Lead) of change the variation thickness have been penetrated by the collimated beam($450mm{\times}4mm{\phi}$) of Gamma-ray from $^{192}Ir$. Then, the scattered $\gamma$-ray dose in variable angle and the directly transmitted $\gamma$-ray dose were measured using the electrometer of ionization chamber. The results were summarized as follows: 1. Obtained the mass attenuation coefficients of $Al;0.0937cm^2g^{-1},\;Cu;0.0937cm^2g^{-1},\;pb;0.244cm^2g^{-1}$. 2. Total intensity of front scattered $\gamma$-ray follow the order of Al>Cu>pb. 3. The scattered $\gamma$-ray intensity with the lager angle of scattering was saturated after increase rapidly, and the scattering angle of the more larger was decreased. 4. The scattered $\gamma$-ray intensity through plates of aluminium or copper was saturated after increase with thicker scatterer, and the intensity was decreased at the more thicker. But the variation of scattered $\gamma$-ray dose in the lead plate made the fewest than Al and Cu. 5. The ratio of the scattered $\gamma$-ray dose and the directly transmitted $\gamma$-ray dose was saturated after increase with the thicker scatterer, and the scatterer of the more thicker was decreased. Degree of total intensity in these ratios was followed the order of Cu>Al>Pb.

• 대한물리의학회지
• /
• 제9권2호
• /
• pp.141-149
• /
• 2014

PURPOSE: This study uses X-rays investigate how university students' smart phone use affects the cervical vertebral angle. METHODS: Ninety-two randomly selected students agreed to participate in this study. The participants' number of hours of smart phone use was gathered using a questionnaire. An X-ray of the participants' cervical vertebrae was taken, and the cervical vertebral angle was measured using the Cobb and the absolute rotation angle (ARA) method. Also, the relation between pain and hours of smart phone use was identified using a visual analog scale (VAS). Using SPSS ver18, the relationships among the cervical vertebral angle and the items in the questionnaire were identified and a frequency analysis, an independent t-test, and the analysis of variance (ANOVA) were calculated. RESULTS: The study showed that an increase in the number hours of smart phone per day led to cervical lordosis(p<0.05). The relationships between points of smart phone addiction and cervical vertebral angle have a negative correlation (p<0.05). Therefore, there are the higher smart phone addiction points, the decrease the cervical vertebral angle. CONCLUSION: The results of the study showed that increase in smart phone use lead to cervical lordosis, and smart phone addiction scores resulted in decreased in the cervical vertebral angle.

• 한국국방경영분석학회지
• /
• 제7권1호
• /
• pp.81-117
• /
• 1981

Mathematical models for hit probabilities of small arms are developed in order to estimate the expected hits on an aircraft for certain altitudes and air speeds. A model for the firing lead angle is developed for cases when the distribution of hits is normal and the firing angle is from 20 degrees to 160 degrees. probabilities of hit for single and multiple shots at various altitudes are calculated. Tables are given showing the probability of hits and kill for targets flying at high speed above 500 feet from ground level.

• Transactions on Electrical and Electronic Materials
• /
• 제16권3호
• /
• pp.112-116
• /
• 2015

This work studied the thickness and contact angle of solder joints between SAC 305 lead-free solder alloy and a Copper (Cu) substrate. Intermetallic compound (IMC) thickness and contact angle of 3Sn-Ag-0.5Cu (SAC 305) leadfree solder were measured using varying aging times, at a fixed temperature at 30℃. The thickness of IMC and contact angle depend on the aging time. IMC thickness increases as the aging increases. The contact angle gradually decreased from 39.49° to 27.59° as aging time increased from zero to 24 hours for big solder sample. Meanwhile, for small solder sample, the contact angle increased from 32.00° to 40.53° from zero to 24 hours. The IMC thickness sharply increased from 0.007 mm to 0.011 mm from zero to 24 hours aging time for big solder. In spite of that, for small solder the IMC thickness gradually increased from 0.009 mm to 0.017 mm. XRD analysis was used to confirm the intermetallic formation inside the sample. Cu₆Sn₅, Cu₃Sn, Ni₃Sn and Ni₃Sn₂ IMC layers were formed between the solder and the copper substrate. As the aging time increased, the strength of the solder joint mproved due to reduced contact angle.

• Journal of Korean Neurosurgical Society
• /
• 제46권3호
• /
• pp.277-280
• /
• 2009

Posterior cranial fossa subdural hematomas and extension of the subdural hematoma to the cerebellopontine angle is rarely seen and the concurrent development of acute peripheral facial palsy and the management strategy have not previously been reported in this pathology because of its rarity. We present this case to emphasize that minor head trauma may lead to a posterior cranial fossa hematoma extending to the cerebellopontine angle and cause peripheral facial palsy in patients using aspirin (acetylsalicylic acid). In addition, partial evacuation and waiting for the resorption of the hematoma may help to prevent damage to the 7th and 8th cranial nerves.

• Bulletin of the Korean Chemical Society
• /
• 제5권2호
• /
• pp.68-73
• /
• 1984

An enhancement of through-bond interaction by bond angle distortion in pyrazine was examined using various MO methods. Results of MINDO/3 geometry optimization with an angle (${\alpha}$) at $C_2$ atom fixed to 120∼90$^{\circ}$ lead to distorted structures in which the distorted bond is brought closer toward lone pair orbital n of N atom. It was also found that the bond angle distortion increased the P character at the atom $C_2$, resulting in an increased vicinal overlap between n and the $C_2-C_3$ bond. The FMO patterns of ${\sigma}$ framework showed three-fold degeneracy, one of which was of different symmetry which mixes in the symmetry adapted pair, $n_+\;and\;n_-;\;both\;n_+\;and\;n_-$ orbitals thus can interact with both FMOs of the ${\sigma}$ framework. The LCBO-MO analysis with partial elimination of bonds, antibonds or both, however, revealed that the main interaction of $n_+$ was with the HO-${\sigma}$ and that of $n_-$ was with the LU-${\sigma}^{\ast}$ orbital of the ${\sigma}$ framework.

• 척추신경추나의학회지
• /
• 제8권1호
• /
• pp.39-47
• /
• 2013

Objectives : The purpose of this study is to find out the relationship between hip internal rotation angle and the level of herniation of lumbar intervertebral disc(HIVD) in single-segment. Methods : We investigated 314 patients (158 male, 156 female) who were diagnosed as herniation of lumbar intervertebral disc(HIVD) in single-segment. We measured 314 patients' hip internal rotation angle and analysed the relationship between the hip internal rotation angle and the level of herniation of lumbar intervertebral disc(HIVD). Results : 1. Among 314 cases, the hip internal rotation angle was different between male and female. Hip internal rotation angle of male was mainly limited and that of female was mainly excessive. 2. Among 314 cases, the normal group, defined as patients who have specific range of hip internal rotation angle(male : $35^{\circ}{\pm}10^{\circ}$, female : $45^{\circ}{\pm}10^{\circ}$), tends to be occurred HIVD at L4/5 level. The limited group, defined as patients who have less angle than normal group, the excessive group, defined as patients who have more angle than normal group, and the complex group, defined as patients who have more angle of one leg and less angle of the other leg than normal group, tend to be occurred HIVD at L5/S1 level(p<0.05). Conclusions : In single-segment lumbar HIVD patients, The normal hip internal rotation angle mainly leads to L4/5 HIVD, while the limited and excessive hip internal rotation angle mainly lead to L5/S1 HIVD.