• The Journal of Korean Physical Therapy
• /
• 제16권3호
• /
• pp.192-204
• /
• 2004

The surface electromyographic(sEMG) analyses were knee joint angle during open kinetic chain exercise (OKC) and close kinetic chain exercise (CKC) in vastus medialis (VM), vastus lateralis (VL), and rectus femoralis (RF). Ten subjects with normal , aged 20 to 30(X=27.4, SD=3.23), were randomized Statistical techniques for data analysis were applied paired t-test. The 0.05 level of significane was used as the critical level for rejection of the null hypotheses for the study. And the results were: 1) Both OKC and CKC improved the strength of quadriceps muscle as the knee joint flexion was increased. 2) In OKC, the strength of VM was improved the most at the 30 degree angle. 3) In CKC, the strength of VM was improved the most at the 30 degree angle. 4) The VM/VL ratio was the largest at the 10 and 20 degree angles in OKC and CKC. 5) The VM/VL ratio at 10, 20, and 30 degree angles was significantly different between OKC and CKC (P < 0.05). Base on the results, the OKCE is recommended for the knee joint patients, especially for the patellofemoral pain syndrome patients, during the early phase of rehabilitation. In order to improve strength of the quadriceps, muscle strength training at 30 degree angle is recommended. In order to improve VM/VL ratio, 10 and 20 degree angles are recommended during OKCE and CKCE, respectively. Future researches are warranted comparing electromyographic analysis between OKCE and CKCE in the quadriceps at a certain work lead, and muscle strength performance in the quadriceps at different positions of foot.

• 한국구조물진단유지관리공학회 논문집
• /
• 제21권1호
• /
• pp.67-73
• /
• 2017

본 연구에서는 LRB 받침을 갖는 플레이트 거더교를 해석 대상 교량으로 하고 편구배별 곡선반경과 사각을 해석변수로 하여 교량받침의 반력에 미치는 영향을 평가하고자 하였다. 지진파로는 El-Centro 지진 기록과 인공지진파를 각각 교축방향과 교축직각방향으로 적용하고 3D 해석을 수행하였다. 해석결과, 곡선교 내측과 예각부에서 부반력이 발생될 가능성이 높은 위치로 나타났으며, 또한, 교축 직각방향으로 지진이 작용하였을 때가 또한 가능성이 높은 조건으로 해석되었다. 그 이외에도 직선교보다는 곡선교이면서 곡률반경이 작고 사각이 작을수록 부반력의 발생 가능성이 높은 것으로 나타났다. 따라서 교량의 부반력 발생여부는 지진파의 종류 및 교량의 편구배, 곡선반경, 사각 등을 종합적으로 고려하여 검토하여야 할 것으로 판단된다.

• 대한족부족관절학회지
• /
• 제19권2호
• /
• pp.51-57
• /
• 2015

Purpose: Minimal incision distal metatarsal osteotomy (MIDMO) is known to be an effective surgical procedure for mild to moderate hallux valgus. However, the result of MIDMO on moderate to severe hallux valgus is controversial; therefore, we investigated the radiological and clinical results of MIDMO on moderate to severe hallux valgus. Materials and Methods: We reviewed 51 feet (48 patients) with moderate to severe hallux valgus. The mean age was 67.0 years and the mean follow-up period was 32.2 months. Radiological data of hallux valgus angle, first intermetatarsal angle, and distal metatarsal articular angle on plain radiographs were analyzed. Recurrence, union, lateral translation of distal fragment and angulation were also analyzed. The clinical data were obtained using American Orthopaedic Foot and Ankle Society (AOFAS) score of preoperation and last follow-up. Receiver operating characteristic (ROC) curve was used to determine a cut-off value. Results: The mean hallux valgus angle measured at preoperation was $37.7^{\circ}$ and $15.9^{\circ}$ at last follow-up. The mean first intermetatarsal angle of preoperation and last follow-up were $15.2^{\circ}$ and $8.3^{\circ}$. The mean distal metatarsal articular angle changed from $12.6^{\circ}$ at preoperation to $7.8^{\circ}$ at last follow-up. Preoperative hallux valgus angle (p=0.0051) and distal metatarsal articular angle (p=0.0078) were statistically significant factors affecting postoperative AOFAS score. Cut-off value of each was $37^{\circ}$ and 13o, respectively. Lateral translation of distal fragment in 5 recurrent cases was 23.0% compared to 45.3% of 46 non-recurrent cases. The result was statistically significant and the cut-off value was 38%. Conclusion: Sufficient lateral translation over 38% in MIDMO on moderate to severe hallux valgus patients with preoperative hallux valgus angle under $37^{\circ}$ and distal metatarsal articular angle under $13^{\circ}$ can lead to good clinical results without recurrence.

• 대한방사선기술학회지:방사선기술과학
• /
• 제40권4호
• /
• pp.533-542
• /
• 2017

진단용 X선 영상에서 산란선은 화질을 열화시키는 주요한 원인이다. X선 장치는 필름/스크린을 사용한 아날로그 시스템부터 Imaging plate (IP) 및 평판 검출기(Flat panel detector; FPD)를 사용한 디지털 시스템으로 바뀌어 가고 있다. 그러나 산란 X선 제거를 위한 Grid는 아날로그 시대에 사용됐던 구조부터 큰 변화가 없다. 본 논문에서는 선행연구에서 고안된 산란선 제거율을 향상시키기 위한 간접변환형 평판검출기의 새로운 구조를 다양한 입사 X선을 사용하는 임상현장에서의 활용 가능성을 검토했다. 일반적으로 FPD는 3개의 층으로 구성되어 있다. 신호를 검출하는 화소와 화소 사이에는 전압을 거는 voltage line이나 데이터를 전달하는 data line과 같은 X선 불감영역이 존재한다. 선행연구에서는 이 불감영역에 정확히 맞추어 방사선 불 투과성의 납을 그물 모양으로 substrate layer에 삽입함으로서 검출기 자체가 산란선 제거 효과가 있도록 설계하였다. 새로운 구조의 임상 유용성을 평가하기 위해, 삽입된 그물 모양의 납을 입사 X선에 대해 가로, 세로성분으로 나누어 각각의 성능을 확인하였으며, 동시에 납의 높이를 변화시켜 납 높이가 성능에 미치는 영향을 영상 대조도와 grid 노출 인자를 통해 검토했다. 검출기면에 대해 대각선으로 입사한 X선($0^{\circ}$, $15^{\circ}$, $30^{\circ}$)에 대해서, 입사 X선에 대해 평행한 가로성분이 세로 성분에 비해 높은 영상 대조도와 낮은 그리드 노출 인자를 나타냈으며, 세로성분의 납 높이가 높을수록 본 연구에서 고안한 검출기에 악영향을 미치는 것을 확인했다. 그러므로 본 연구에서 고안한 새로운 FPD 시스템은 FPD의 구조를 방사선검사 조건과 목적에 맞추어 최적화함으로써 임상 의료현장에서의 사용 가능성이 확인되었다.

• 디지털융복합연구
• /
• 제12권10호
• /
• pp.345-351
• /
• 2014

본 연구의 목적은 평면 모형의 가로, 세로 비율과 가상 cobb의 각도를 측정하는 등의 화상의 왜곡에 대한 비교 연구를 통해 3 spot DR 척추 전장 촬영 방법의 정확한 정보를 제공하는 것이다. 팬텀은 $H(40cm){\times}V(116cm){\times}D(2.3cm)$ 크기로 납판이 삽입 된 격자형 아크릴로 만들었다. 제작 모형을 사용하여 각 장비에 각각 3회, OFD를 변경하여 총 9회 촬영하였고 납 격자의 가로, 세로 길이와 비율을 측정하였다. 또한 모형에서 임의의 지점을 지정하여 Cobb 각도를 측정하였다. 가로 세로 비율은 CR은 0.98~1.01, scan DR은 0.96~0.97, 3 spot DR은 0.99~1.01로 측정되었다. Cobb 각도는 각각 $52.5{\sim}53.3^{\circ}$, $52.1{\sim}54.3^{\circ}$, $52.8{\sim}53.2^{\circ}$로 측정되었다. 실험 결과에 의해 평면 모형을 이용한 본 연구에서 척추 전장 촬영을 위한 3 spot DR 촬영 방식의 영상은 왜곡이 없는 정확한 방법이다.

• Geomechanics and Engineering
• /
• 제5권5호
• /
• pp.463-483
• /
• 2013

Considering the influences of fluid penetration, casing, excavation processes of wellbore and perforation tunnels, the seepage-deformation finite element model of oil and gas well coupled with perforating technique is established using the tensile strength failure criterion, in which the user-defined subroutine is developed to investigate the dynamic evolvement of the reservoir porosity and permeability. The results show that the increases of perforation angle and decreases of perforation density lead to a higher fracture initiation pressure, while the changes of the perforation diameter and length have no evident influences on the fracture initiation pressure. As for initiation location for the fracture in wellbore, it is on the wellbore face while considering the presence of the casing. By contrast, the fractures firstly initiate on the root of the tunnels without considering casing. Besides, the initial fracture position is also related with the perforation angle. The fracture initiation position is located in the point far away from the wellbore face, when the perforation angle is around $30^{\circ}$; however, when the perforation angle is increased to $45^{\circ}$, a plane fracture is initiated from the wellbore face in the maximum horizontal stress direction; no fractures was found around perforation tunnels, when the angel is close to $90^{\circ}$. The results have been successfully applied in an oilfield, with the error of only 1.1% comparing the fracture initiation pressure simulated with the one from on-site experiment.

• 건축역사연구
• /
• 제21권3호
• /
• pp.7-28
• /
• 2012

This study is intended to Mindori structure which is general private houses' structural type among traditional types and is a basic study to confirm structural characteristics of Hwatong connection which is general connection type of column-beam-cross beam. It is aimed to analyze how main member, column, such as size, figure, thickness of Sungetuk and Dugeup affect on structure. Following conclusions are drawn. 1. According to connection conditions, models with big coefficient of friction show stable hysteretic behavior until the angle rotation of member reaches 1/60 and models with small coefficient of friction show dramatical increase in load after the angle rotation of member reaches 1/24. After the angle rotation of member reaches 1/30, separation distance of members is identified physically and cracks are not observed. 2. Specimens with big coefficient of friction show similar inner force regardless of column size(except column size 150mm) and models with small coefficient of friction show increasing inner force as the column size increases. Specimens with same sectional area have similar inner force even though the column figures are different. The thickness of Sungetuk and Dugeup doesn't affect inner force greatly, however, when the thickness of Sungetuk is thin, it could lead to failure of structure as it breaks. 3. The bigger the size of column and the coefficient of friction are, the smaller Bending stiffness depreciation ratio is. 4. Energy Dissipation Efficiency differs from the coefficient of friction. When the coefficient of friction is big, square column shows bigger than round one and it is bigger when the thickness of Sungetuk and Dugeup is thicker. When the coefficient of friction is small, round column shows bigger than square one.

• 한국안전학회지
• /
• 제33권1호
• /
• pp.41-46
• /
• 2018

Experiments were carried out the phenomenal observation on effect of corona treated hotmelt laminating film in process of manufacture by 2 kinds of rolling speed and electric power variatons. Surface treatment by corona which is exposure of film surface to electron of ion bombardment, rather than mere exposure to active species, like atomic oxygen or ozone, can enhance adhesion by removing contaminant, electret, roughening surface, and introducing reactive chemical group. Reactive neutrals, ions, electron and photons generated during the corona treatment interact simultaneously with polymers to alter surface chemical composition, wettability, and thus film adhesion. However, it is highly recommended that extensive chains scission is avoided because it can lead to side-effect by forming sticky matter, resulting in dropouts. This paper reviews principles of surface preparation of polypropylene substrate by corona discharging. In addition, the experimental section provides a description of parameter optimization on corona discharging treatment and its side-effect. Experimental results are discussed in terms of surface wetting as determined by contact angle and SEM measurements. When the rolling speed of the film decreased from 1.666 [m / sec] to 0.083 [m / sec], contact angle decreased from $80[^{\circ}]$ to $64[^{\circ}]$, and the wettability was greatly improved. As the supply power increased from 0.4 [kVA] to 2 [kVA] at the corona discharge surface treatment, the contact angle decreased from $77[^{\circ}]$ to $65[^{\circ}]$, and the wettability was greatly improved.

• Physical Therapy Rehabilitation Science
• /
• 제9권3호
• /
• pp.191-196
• /
• 2020

Objective: Congenital muscular torticollis (CMT) is a disease with abnormal head and neck posture in infants. It affects the child's movement and development and can lead to complications. Therefore, this study aims to find out what factors influence the rehabilitation treatment duration of infants with CMT. Design: Cross-sectional study. Methods: The subjects were 63 infants under 90 days of age who were diagnosed with CMT. Age, thickness of the sternocleidomastoid muscle (SCM) on the affected and non-affected side, head tilt angle, and head rotation angle of the affected head in infants were collected. The ratio of muscle thickness was calculated from the thickness of the affected SCM and the thickness of the non-affected SCM (A/N ratio). All subjects underwent conservative physical therapy twice a week for 30 minutes, and the end of the treatment was when the angle of head tilt was normal or less than 5 degrees, and the treatment duration was calculated. Results: Age, thickness of affected SCM, and head tilt were significantly correlated with treatment duration (p<0.05). The thickness of the non-affected SCM, A/N ratio, and head rotation angle did not show any correlation with treatment duration. The factors affecting the treatment duration were head tilt and age, showing 21% explanatory power of adjusted R². Conclusions: The main factors affecting the treatment duration of infants with CMT are head tilt and age. Therefore, more attention should be directed to the infant's head tilt and age for effective physical therapy of infants with CMT.

• 한국운동역학회지
• /
• 제26권4호
• /
• pp.361-367
• /
• 2016

Objective: The aim of this study was to compare three-dimensional kinematic changes of the lower extremity between the two different braking distances during snowplow in alpine skiing. Method: Six alpine ski instructors (age: $25.3{\pm}1.5yr$, height: $169.3{\pm}2.9cm$, weight: $66.2{\pm}5.9kg$, career: $4.2{\pm}2.9yr$) participated in this study. Each skier was asked to perform snowplow on the two different braking distances (2 and 4 m). Results: Snowplow and edging angles (p = .006 and p = .005), ankle adduction and inversion (p = .033 and p = .002), knee extension (p = .003), and hip abduction and internal rotation (p = .043 and p = .006) were significantly greater in the 2 m than in the 4 m braking distance. Conclusion: Based on our results, we suggest that skiers should make greater snowplow and edging angles on the shorter braking distance. In this situation, ankle joint adduction/inversion angle and hip joint internal-rotation make greater snowplow angle, and hip joint abduction make greater edging angle. In addition, greater knee joint extension angle may lead to more posteriorly positioned center of mass.