• 한국항해항만학회지
• /
• 제29권8호
• /
• pp.741-746
• /
• 2005

본 연구는 시뮬레이션을 활용하여 장치장의 레이아웃을 설계하고 레이아웃의 대안설계를 평가하기 위한 방법을 제안한다. 설계방법론은 장치장 레이아웃을 가진 재래식 컨테이너터미널의 개념들을 기초로 한다. 일반적으로 컨테이너터미널의 장치장 설계는 두가지 부분으로 구성되는데, 하나는 섹션수와 런수간의 장치장 면적을 분리하는 것이고, 다른 하나는 야드트럭과 야드크레인과 같은 장비의 수를 결정하는 것이다. 과거에는 이 설계가 시설물과 장비들을 고려해야 하는 매우 복잡한 문제이기 때문에 재래식 컨테이너터미널의 복제와 운영자의 경험에 의존했다. 본 논문에서는 시뮬레이션 방법이 사용된 개념설계로서 장치장 설계 방법을 제안한다. 장치장 영역에서 섹션과 런의 수, 컨테이너 크레인당 야드트럭의 수, 런딩 야드 크레인의 수 등이 시뮬레이션을 사용하여 결정된다. 추가로 장치장 레이아웃에서 블록간의 통행량 흐름이 비율별로 추정된다.

• Water Engineering Research
• /
• 제2권4호
• /
• pp.199-207
• /
• 2001

A computer-assisted desktop is developed for layout design of a concrete gravity dam on the basis of safety and economy. Using a set of regression equations, a dam layout is proposed. With reference to the regression equations and relevant input data, overall dam dimensions are determined by satisfying the stability criteria jointly under usual, unusual, and extreme loading conditions with the desired hydraulic conformity. Among several feasible alternatives, the program enables a designer to select the optimum layout, which corresponds to the minimum total cost of the structure. The method is applied to a case study to examine dimensions of proposed alternatives and to compare them with those of an existing dam.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.251-254
• /
• 2011

This paper describes the design and implementation of the DMI display based on ERTMS specification for the Integrated Onboard Signaling System (IOSS). IOSS is consists of ATS, ATC, and ATP based on ERTMS/ETCS Level 1. We propose an improved DMI display design which has single layout concept for the IOSS. When a train is in the ATS, ATC, or ATP railway section, it is protected by the ATS, ATC, or ATP equipment, respectively. Therefore, DMI should display the different information according to the each signaling system. We design DMI display implemented as single layout for ATP, ATS and ATC information. This single layout display has a well integrated look and feel using the ERTMS specification and layout. This is for the driver to perceive the information easily and not to experience inconvenience resulting from the sense of difference when the train crossed into the different signaling section. Finally, we show the implementation result following this concept.

• 산업경영시스템학회지
• /
• 제36권4호
• /
• pp.71-76
• /
• 2013

For a die casting mold, generally, the casting layout design should be considered based on the relation among injection system, casting condition, gate system, and cooling system. Also, the extent or the location of product defects was differentiated according to the various relations of the above conditions. In this research, in order to optimize the casting layout design of an automotive Oil Pan_DX2E, Computer Aided Engineering (CAE) simulation was performed with two layout designs by using the simulation software (AnyCasting). The simulation results were analyzed and compared carefully in order to apply them into the production die-casting mold. During the filling process with two models, internal porosities caused by air entrapments were predicted and also compared with the modification of the gate system and overflow. With the solidification analysis, internal porosities occurring during the solidification process were predicted and also compared with the modified gate system.

• 대한산업공학회지
• /
• 제43권1호
• /
• pp.12-18
• /
• 2017

This study presents a plant concept design for a smart factory which is mainly targeted to machine airplane parts. The plant layout is based on the TOC-DBR approach together with autonomous distributed factory control considered, while discrete event simulation is also performed in order to validate its layout. The resulting layout and its procedure turn out to be quite a useful guideline in realizing those smart factories especially for machining-oriented manufacturing industries.

• 한국정밀공학회지
• /
• 제16권6호
• /
• pp.197-208
• /
• 1999

This paper presents an operation sequence-based approach for determining machine cell layout in a cellular manufacturing environment. The proposed model considers the sequence of operations in evaluating the intercell and intracell movements. In this paper, design of cellular layout has an objective of minimization of total material flow among facilities, where the total material flow is defined as a weighted sum of both intercell and intracell part movements. The proposed algorithm is developed by using genetic algorithm and can be used to design an optimal cellular layout which can cope with changes of shop floor situation by considering constraints such as the number of machine cells and the number of machines in a machine cell.

• 산업경영시스템학회지
• /
• 제32권4호
• /
• pp.93-100
• /
• 2009

This paper addresses the facility layout problem in multi-bay environments, where the bays are connected at one or both ends by an inter-bay material handling system. In most previous studies, the main concern is to allocate facilities or departments to the bays whose widths are fixed. In this research, we suggest the efficient models that provide the optimal layout solution under flexible bay width environments. We also suggest a mathematical model that provides the optimal solution using two-way facility allocation approach instead of one-way allocation technique. This paper also shows the approach of TABU search to the assignment and layout design of the departments. The results generated from TABU search are compared to the result from the mathematical model. Models are developed using mixed integer programming for various test problems and solved by CPLEX.

• Design & Manufacturing
• /
• 제6권1호
• /
• pp.34-38
• /
• 2012

Test work is the press die branch at The Korea-China-Japan Grand Prize Contest. This study focuses on strip layout design for test work. A comparison is drawn between product shape and blank deployment line. During the forming analysis of the whole product, shape part of the total forming process is analyzed. As for forming part and flange deployment, forming analysis is carried out in part during the mid process. Material utilization is 42.6 percent and strip layout design is completed in 14 processes that are comprised of hourglass, slotting, embossing, drawing and trimming.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.224-228
• /
• 2000

The piercing and blanking of thin sheet metal working is specified division in press die design and making. In order to prevent the detects, the optimum design of the production part, strip process layout, die design, die making and try out etc. re necessary the analysis of effective factors. For example, theory and practice of metal shearing process and its phenomena, die structure, machine tool working for die making, die materials and its heat treatment, metal working in industrial and its know how etc. In this study, we analyzed whole of data base, theoretical back ground of metal working process, and then performed the progressive die tryout with the screw press. This study regards to the aim of small quantity of production part's press working. Part 1 of this study reveals with production part and strip process layout design.

• 산업공학
• /
• 제11권2호
• /
• pp.125-137
• /
• 1998

A new vehicle design approach coupled with an ergonomic human model was proposed in the study. The seating package layout of a vehicle is very important to the driving comfort, and it has been one of the primary ergonomic research areas since the past 30 years. The diverse and interrelated design factors of seating package layout in the limited workspace make designers often neglect many parameters related with drivers which differ in their anthropometric characteristics. It is due to the lack of the proper tools by which the designer can easily apply several ergonomic design guidelines to the vehicle design. In this study. an iterative package layout procedure was developed, and the effectiveness of an ergonomic human model was examined in this procedure. A discomfort function was developed for the quantitative evaluation of the driving posture. This study clearly demonstrates that the package layout using an ergonomic human model is very helpful to improve the usability and driving comfort of the drivers or passengers.