• 한국지하수토양환경학회지:지하수토양환경
• /
• 제8권3호
• /
• pp.8-12
• /
• 2003

The centrifuge test result on capped sediment was compared to the advection- dispersion equation proposed for one layered to predict contaminant transport parameters. The fitted contaminant transport parameters for the centrifuge test results were one to three orders of magnitude greater than the estimated parameters from the advection-dispersion equation. This indicates that the centrifuge model over estimated the contaminant transport phenomena. Thus, the centrifuge provides a non-conservative approach to modeling contaminant transport. It should be also noted that the advection-dispersion equation used in this study is a one layered model. Two layered modeling approaches are more appropriate for modeling this data since there are two layers with different partitioning coefficients. Further research is required to model the centrifuge test using two-layered advection-dispersion models.

• 한국음향학회지
• /
• 제27권2호
• /
• pp.92-101
• /
• 2008

다층 모델이 갖는 문제점을 해소하고, 2층 모델의 지나친 간결성을 보완하기 위해 유체-유체-탄성체로 이루어진 3층 모델을 가정하였다. 일반적으로 퇴적층의 두께가 10파장 이상인 경우, 수층 내의 음장에 대한 암반층의 영향을 무시할 수 있다고 알려져 왔는데, 음장의 계산결과와 실험결과간의 최대 상관계수을 추적하는 방법을 통해 그 같은 조건이 보다 구체화 할 수 있음을 확인하였다. 최대 상관계수를 구하기 위해 단일센서로부터 얻어진 전달손실을 사용하였다. 음속이 1813m/s인 퇴적층을 가정할 경우 50 kHz에서 120 kHz 간의 주파수 범위에서 2층모델로 전환되는 조건은 2.5파장내지 7.7파장 범위에 존재하였다.

• 소성∙가공
• /
• 제19권7호
• /
• pp.405-410
• /
• 2010

Double layered tube that has been used for transportation and oil piping system is occasionally exposed to elevated temperature. The change in stress state at elevated temperature is important for the safe design of double layered tube. In this study, the variation of stress state for hydroformed double layered tube of which inner tube is stainless steel and outer tube is mild steel has been analytically analyzed. To characterize the thermal stress at elevated temperature, analytical model to provide thermal stresses between outer tube and inner tube was developed by using theories of elasticity and Lame equation. The feasibility of analytical model is verified by finite element analysis using ANSYS $CLASSIC^{TM}$, commercially available code. The variation of thermal stress at various thickness combination of inner and outer tube has also been investigated by proposed analytical model.

• Structural Engineering and Mechanics
• /
• 제5권5호
• /
• pp.645-662
• /
• 1997

A nonlinear semi-three-dimensional layered finite element procedure is developed for cracking and failure analysis of reinforced concrete beams and the spandrel beam-column-slab connections of flat plates. The layered element approach takes the elasto-plastic failure behaviour and geometric nonlinearity into consideration. A strain-hardening plasticity concrete model and a smeared steel model are incorporated into the layered element formulation. Further, shear failure, transverse reinforcement, spandrel beams and columns are successfully modelled. The proposed method incorporating the nonlinear constitutive models for concrete and steel is implemented in a finite element program. Test specimens including a series of reinforced concrete beams and beam-column-slab connections of flat plates are analysed. Results confirm the effectiveness and accuracy of the layered procedure in predicting both flexural and shear cracking up to failure.

• ETRI Journal
• /
• 제43권3호
• /
• pp.524-537
• /
• 2021

High-performance Linpack (HPL) is among the most popular benchmarks for evaluating the capabilities of computing systems and has been used as a standard to compare the performance of computing systems since the early 1980s. In the initial system-design stage, it is critical to estimate the capabilities of a system quickly and accurately. However, the original HPL mathematical model based on a single core and single communication layer yields varying accuracy for modern processors and accelerators comprising large numbers of cores. To reduce the performance-estimation gap between the HPL model and an actual system, we propose a mathematical model for multi-communication layered HPL. The effectiveness of the proposed model is evaluated by applying it to a GPU cluster and well-known systems. The results reveal performance differences of 1.1% on a single GPU. The GPU cluster and well-known large system show 5.5% and 4.1% differences on average, respectively. Compared to the original HPL model, the proposed multi-communication layered HPL model provides performance estimates within a few seconds and a smaller error range from the processor/accelerator level to the large system level.

• Advanced Composite Materials
• /
• 제17권3호
• /
• pp.191-214
• /
• 2008

Polypropylene/layered silicate nanocomposites containing maleic anhydride grafted polypropylene were prepared by melt compounding and their rheological behavior was investigated in shear flow. Transient and steady shear flows were simulated numerically by using the K-BKZ integral constitutive equation along with experimentally determined damping functions under dynamic oscillatory and step strain shear flows. Nonlinear shear responses were predicted with the K-BKZ constitutive equation using two different damping functions such as the Wagner and PSM models. It was observed that PP-g-MAH compatibilized PP/layered silicate nanocomposites have stronger and earlier shear thinning and higher steady shear viscosity than pure PP resin or uncompatibilized nanocomposites at low shear rate regions. Strong damping behavior of the PP/layered silicate nanocomposite was predicted under large step shear strain and considered as a result of the strain-induced orientation of the organoclay in the shear flow. Steady shear viscosity of the pure PP and uncompatibilized nanocomposite predicted by the K-BKZ model was in good agreement with the experimental results at all shear rate regions. However, the model was inadequate to predict the steady shear viscosity of PP-g-MAH compatibilized nanocomposites quantitatively because the K-BKZ model overestimates strain-softening damping behavior for PP/layered silicate nanocomposites.

• 한국군사과학기술학회지
• /
• 제3권2호
• /
• pp.35-41
• /
• 2000

A modified theoretical analysis of the ballistic perforation on the double and multi-layered armour plates using an upper bound method has been presented in this paper. A modified model based on the suggestion of the Awerbuch-bodner model has been adapted and extended into double and multi-layered armour plates when the plugging type of penetration has been occurred. The residual projectile speed, ballistic limit velocity and contact time during the penetration process have been derived from the equation of motion at each stage.

• Journal of Electrical Engineering and Technology
• /
• 제4권4호
• /
• pp.531-537
• /
• 2009

Lightning has a broad frequency spectrum from DC to a few MHz. Consequently, the high frequency performance of grounding systems for protection against lightning should be evaluated, with the distributed parameter circuit model in a uniform soil being used to simulate grounding impedances. This paper proposes a simulation method which applies the distributed parameter circuit model for the frequency-dependent impedance of vertically driven ground rods by considering multi-layered soil structures where ground rods are buried. The Matlab program was used to calculate the frequency-dependent ground impedances for two ground rods of different lengths. As a result, an increase of the length of ground rod is not always followed by a decrease of grounding impedance, at least at a high frequency. The results obtained using the newly proposed simulation method considering multi-layered soil structures are in good agreement with the measured results.

• 한국시뮬레이션학회논문지
• /
• 제26권3호
• /
• pp.105-113
• /
• 2017

본 연구는 대공위협에 대한 생존성 향상을 위한 다층 대공방어 체계의 최적 투자 계획 모델을 고려한다. 최적화 모델 수립을 위해 다층 대공방어 체계를 네트워크 모델로 표현하고, 가용 예산이 제한되어 있는 상황 하에서 대응실패 확률을 최소화하기 위해 각 방어무기에 대하여 투자여부를 결정하는 모델과 연속적인 투자가 가능한 모델을 각각 제시한다. 비선형 형태의 목적함수를 로그함수를 통해 선형화하였으며, 제시된 최종 모델의 해법으로서 동적계획법 알고리즘과 선형계획법을 제안한다. 가상의 다층 대공 방어 상황을 설정한 후, 두 가지의 최적화 모델에 대한 최적해를 도출하고 그 결과를 분석하였다. 이는 다층 대공방어 체계의 신뢰도 향상을 위한 효과적인 투자 계획 수립의 필요성 및 접근방법을 제시한다.

• 한국음향학회지
• /
• 제20권4호
• /
• pp.71-80
• /
• 2001

2개 층으로 구성된 페커리스 (Pekeris) 모델에 해저퇴적층의 영향을 고려하기 위해 1개의 퇴적층을 증가시킨 2개의 해저층으로 구성된 3층의 유체모델을 가정하고 원통형 좌표계에서 그린 (Green)함수와 경계조건, 좀머펠트 (Sommerfeld) 방사조건 등을 적용하여 해를 구했다. 모드는 불연속 (discrete)모드와 가상 (virtual)모드로 구분하여 구했으며 유도된 불연속모드 산출 관계식은 Tolstoy와 Clay의 정규 (normal)모드 생성방정식과 일치함을 확인하였다. 또한, 환경조건을 페커리스 모델의 조건과 유사하도록 조절하여 시뮬레이션을 수행한 결과, 동일한 결과를 보임을 통해 유도된 수식이 조건에 따라서는 페커리스 모델로 환원됨을 확인하였다. 따라서 본 모델이 근거리 음장내의 가상모드에 대한 퇴적층의 영향 연구에 사용될 수 있다고 판단된다.