• 복식
• /
• 제61권7호
• /
• pp.67-79
• /
• 2011

This study is to design a ball-jointed doll costume with historical research in clay female doll's costume from Hwangsung-dong tomb of the Silla Dynasty[新羅] in 7C. This clay female doll's costume was characterized by slim silhouette, long sleeves, no neckline, side slit, high waistline, and bun on the back neck of representative of the early era. According to literature of 7-8C and textile relics, it is presumed that she wore short Jeogori[短衣, Dan-eui] with long sleeves and two layered skirt, and Dan-ryeong(團領) could be added as attachment that is reflective of the time era. For making design costume, Ra[羅, silk gauze] was used for long Dan-ryeong, plain silk and brocade[錦, Geum] for Dan-eui and skirt as a special textile of this period. Waist dart and small snap were added to the costume of ball-jointed doll because of hardness and curvy shape of doll's body, without contradicting traditional value. For better use of this study and cost reduction purposes, development of production system for traditional doll costumes should be considered.

• 한국지반신소재학회논문집
• /
• 제20권1호
• /
• pp.21-34
• /
• 2021

단일지반에서의 경험토압을 다층지반에 적용할 때 각 지층이 토압에 기여하는 효과를 고려할 수 없는 문제 등을 해결하고자 국내외에서 지반굴착시 측정된 토압을 조사하고 분석하였다. 다층지반의 토압은 단일지반의 경험토압과 상이하고, 대표 토질이 아닌 지층의 토압 기여 효과를 고려할 수 없음을 확인하였다. 본 연구에서는 기존의 단일지반에 대한 경험토압 산정방법을 다층지반까지 확장하여 단일지반과 다층지반 모두 적용 가능한 방법을 제안하고 검증하였다. 제안방법은 굴착심도 0.1Z/H 이하에서 실측값에 더 근접한 토압을 예측하는 등 기존 단일지반의 토압보다 예측 신뢰도가 우수한 것으로 평가되었다. 제안방법 중 주동상태에서의 파괴면적비를 고려하는 방법이 지반공학적 타당성을 갖추고도 실측토압과 가장 유사한 결과를 도출하였다. 또한, 제안방법의 적용성을 확인하고자 실제 설계사례에 대해 제안방법과 기존 방법의 설계 결과를 비교 분석하여 제시하였다.

• Korean Chemical Engineering Research
• /
• 제46권1호
• /
• pp.23-36
• /
• 2008

고분자-점토 나노복합체는 소량의 점토를 사용하여 큰 기계적 물성향상을 나타내 많은 관심을 끌고 있는 분야이다. 층상 구조를 갖고 있는 점토를 고분자 matrix에 분산하는 과정으로 요약할 수 있는 고분자-점토 나노복합체 제조는 친수성 점토 표면을 조절하는 기술, 점토의 물리적 성질을 이용하는 무기재료에 관한 지식, 고분자 합성, 고분자 유변학, 고분자 용액 거동, 기계적 물성이 복합적으로 작용하는 계이다. 이러한 복잡성을 설명하기 위해, 이 총설에서 점토 종류와 그 특성을 설명하였다. 또한 점토 특성과 고분자-점토 나노복합체 제조 방법의 연관성에 대해 설명하고, 제조된 복합체의 구조 분석과 방법에 대해 설명하였다. 그리고 복합체의 특징적인 물성을 분류한 후 그 물성과 복합체의 구조를 연관하여 살펴보았다. 마지막으로 최근의 연구 경향과 향후 연구 경향을 제시하였다.

• 멤브레인
• /
• 제15권3호
• /
• pp.247-254
• /
• 2005

키토산 필름은 농업, 식품과 제약 분야에서 응용이 가능하다. 그러나 키토산으로만 만들어진 필름은 기체투과성이 높고 기계적 물성에 약하다. 따라서 본 연구에서는 기체 투과성을 낮추고 기계적 물성을 높이기 위해 층상구조를 갖는 점토광물의 일종인 montorillonite (MMT)와 양이온 생체고분자인 키토산을 이용하여 양이온 교환과 수소결합과정을 통해 $Na^+-MMT$에 키토산을 삽입하여 키토산/Clay 나노복합재료를 제조하였다. 키토산/clay 나노 복합재료의 X-ray 회절패턴에서 $2\theta=7.5^{\circ}$에서 MMT의 basal reflection이 나타났고, $2\theta=3\~5^{\circ}$ 주위에서의 새로운 약하고 넓은 peak로서 더 낮은 각에서 MMT의 basal reflection의 이동에 의해 삽입된 나노 구조의 형성을 증명하였다. 또한 TGA thermogram를 이용하여 clay의 함유량이 증가할수록 제조된 나노복합재료의 열분해가 일어나는 범위의 질량감소가 줄어드는 것을 확인하므로서 내열성을 관찰하였다. 기계적 물성 성질을 측정하여 clay 함유량의 증가에 따른 인장 강도와 인장 모듈러스의 변화를 관찰하고, 키토산이 층상 실리케이트 내에 삽입하여 제조된 나노복합재료에서 clay의 함유량이 증가할수록 질소 투과경로의 tortuosity를 증가시켜서 기체 투과도를 감소시키는 것도 확인하였다.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.95-96
• /
• 2006

Surface modification of clay minerals has become increasingly important for improving the practical applications of clays such as polymeric nanocomposites. We used the copolymer as modifiers having phenyl components, and successfully developed a route for the preparation of amine functionalized polymer based on oligostyrene and its block copolymers. The oligo(St-co-VBC)s with controlled molecular weight were synthesized via nitroxide mediated polymerization method. We also successfully prepared organophilic layered silicates whose surface is covered with styrenic copolymers. Through the analysis of chemical structure and morphology, we concluded that copolymers were very effective organic modifiers to change the surface characteristics of layered silicates.

• Fibers and Polymers
• /
• 제6권4호
• /
• pp.289-296
• /
• 2005

Biodegradable nanocomposites were prepared by mixing a polymer resin and layered silicates by the melt intercalation method. Internal structure of the nanocomposite was characterized by using the small angle X-ray scattering (SAXS) and transmission electron microscope (TEM). Nanocomposites having exfoliated and intercalated structures were obtained by employing two different organically modified nanoclays. Rheological properties in shear and extensional flows and biodegradability of nanocomposites were measured. In shear flow, shear thinning behavior and increased storage modulus were observed as the clay loading increased. In extensional flow, strain hardening behavior was observed in well dispersed system. Nanocomposites with the exfoliated structure had better biodegradability than nanocomposites with the intercalated structure or pure polymer.

• 전기학회논문지
• /
• 제57권9호
• /
• pp.1572-1578
• /
• 2008

The effect of the organoclay_10A nanoparticles on the DSC and Structural and Dielectrics Properties(1Hz-1MHz) for epoxy/Organoclay_10A Nanocomposites has been studied. Dielectric properties of epoxy-Organoclay nanocomposites were investigated at 1, 3, 5, 7, 9 filler concentration by weight. Epoxy nanocomposites samples were prepared with good dispersion of layered silicate using power ultrasonic method in the particles. As structural analysis, the interlayer spacing have decreased with filled nanoparticles contents increase using power ultrasonic dispersion. The maximum increase interlayered spacing was observed to decease for above 5wt% clay loading. The other hand, as decrease with concentration filler of the layered silicate were increased dispersion degree of nanoparticles in the matrix. The interesting dielectric properties for epoxy based nanocomposites systems are attributed to the large volume fraction of interfacesin the bulk of the material and the ensuring interactions between the charged nanoparticle surface and the epoxy chains.

• Geomechanics and Engineering
• /
• 제32권1호
• /
• pp.21-34
• /
• 2023

In order to analyze the effect of the cyclic lateral loading on the response of a pile-soil system, a full-scale single steel pile was subjected to one-way cyclic loading. The test pile was driven into a bi-layered soil consisting of a normally consolidated saturated clay overlying a silty sandy layer, the site being submerged by water up to one meter above the mudline in order to reproduce the conditions of an offshore pile foundation. The aim of this paper is to present the main results of interpretation of the cyclic lateral tests in terms of pile deflections, bending moment, and cyclic P-Y curves. From these latter an absolute secant reaction modulus E_AS,N was derived and a simple calculation model of the test single pile is proposed based on this modulus. Two applications of the proposed model are carried out, one with a 2D finite element modelling, and the second with a load transfer curves-based method.

• Geomechanics and Engineering
• /
• 제34권5호
• /
• pp.561-575
• /
• 2023

This study investigates to provide a fast solution to the problem of bearing capacity in layered soils with easily obtainable parameters that does not require the use of any charts or calculations of different parameters. Therefore, a hybrid approach including both the finite element (FE) method and machine learning technique have been applied. Firstly, a FE model has been generated which is validated by the results of in-situ loading tests. Then, a total of 192 three-dimensional FE analyses have been performed. A data set has been created utilizing the soil properties, footing sizes, layered conditions used in the FE analyses and the ultimate bearing capacity values obtained from the FE analyses to be used in multigene genetic programming (MGGP). Problem has been modeled with five input and one output parameter to propose a bearing capacity formula. Ultimate bearing capacity values estimated from the proposed formula using data set consisting of 20 data independent of total data set used in MGGP modelling have been compared to the bearing capacities calculated with semi-empirical methods. It was observed that the MGGP method yielded successful results for the problem considered. The proposed formula provides reasonable predictions and efficient enough to be used in practice.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 봄 학술발표회 논문집
• /
• pp.72-74
• /
• 2003

There has been extensive interest in the development of new nanocomposites. One kind of these systems is the hybrid based on organic polymers and inorganic minerals consisting of layered silicates. Some properties like stiffness, strength, barrier properties, thermal, and oxidative stability can be improved by the presence of the filler in the polymeric matrix[1]. It is reported that, in the nylon 6/clay nanocomposites, the modulus is increased, but impact strength and elongation at break are drastically decreased. (omitted)