• 한국재료학회지
• /
• 제13권12호
• /
• pp.846-849
• /
• 2003

Doping effect of various ions in Bi-layered ferroelectric $SrBi_2$$Nb_2$$O_{9}$ (SBN) ceramics was studied. Undoped SBN ceramic and SBN ceramics doped with $Ba^{2＋}$, $Pb^{2＋}$,$ Ca^{2＋}$ , $Bi^{3＋}$ , $La^{3＋}$ , $Ti^{4＋}$ , $Mo^{6＋}$ , and $W^{6＋}$ ions were made by a solid state reaction. Dielectric constants were measured with temperature. Ferroelectric transition temperature decreased with $Pb^{2＋}$ , $Ba^{2＋}$ , $La^{3＋}$ doping, but the transition temperature increased with $Ca^{2＋}$ , $Bi^{3＋}$ , $Ti^{4＋}$, $Mo^{6＋}$ , or$ W^{6＋}$ ionic doping. These results show that the ion size plays an important role in the ferroelectricity of SBN ceramic.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.533-534
• /
• 2006

1mm-thick BLT ceramics were sintered in accordance with a bulk ceramic fabrication process. All XRD peaks detected in the sintered ceramics were indexed as the Bi-layered perovskite structure without secondary phases. Density was increased with increasing the sintering temperature up to $1050\;^{\circ}C$ and the maximum value was about 98% of the theoretical density. The remanent polarization (2Pr) value of BLT ceramic sintered at $1050\;^{\circ}C$ was approximately $6.5\;{\mu}C/cm^2$ at the applied voltage of 4.5kV. From these results, a BLT ceramic target for plused laser deposition (PLD) system was successfully fabricated.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.276-277
• /
• 2006

1mm-thick BLT ceramics were sintered in accordance with a bulk ceramic fabrication process. AII XRD peaks detected in the sintered ceramics were indexed as the Bi-layered perovskite structure without secondary phases. Density was increased with increasing the sintering temperature up to $1050^{\circ}C$ and the maximum value was about 98% of the theoretical density. The remanent polarization (2Pr) value of BLT ceramic sintered at $1050^{\circ}C$ was approximately $6.5\;{\mu}C/cm^2$ at the applied voltage of 4.5 kV. The calculated electromechanical coupling factor ($k_t$) of it was about 5% and the mechanical quality factor (Qm) was about 2200. From these results, a BLT ceramic target for pulsed laser deposition (PLD) system was successfully fabricated.

• 한국세라믹학회지
• /
• 제39권3호
• /
• pp.222-225
• /
• 2002

Microwave dielectric properties of the layered and functionally graded materials (FGMs) of $Mg_{0.93}Ca_{0.07}TiO_3$ (MCT) and $(Ca_{0.3}Li_{0.14}Sm_{0.42})TiO_3$(CLST) were investigated as a function of the volume ratio of two components. Dielectric constant was decreased with an increase of the volume ratio of MCT which had a lower dielectric constant thant CLST. For the layered FGMs specimens, the difference of thermal expansion coefficients between two components induced thermal strain to dielectric layers, which was confirmed by the plot of ${\Delta}$k (X-ray diffraction peak width0 versus k (scattering vector) using the double-peak Lorentzian function, f(x). Quality factor of the specimens was affected by the thermal strain of dielectric layer, especially MCT layer. For the specimen with the volume ratio of MCT/CLST = 2, the qulaity factor of the specimen showed a minimum value due to the maximum thermal strain fo MCT layer.

• 한국세라믹학회지
• /
• 제47권2호
• /
• pp.132-135
• /
• 2010

Thermal properties of layered metal chalcogenides such as $WT_2$ (T=S,Se) with two-dimensionally disordered structure were evaluated. Thermal conductivity shows a marked decrease after exfoliation and subsequent restacking because of random stacking of two-dimensional crystalline sheet, which circumvents thermal conduction pathways along longitudinal direction in anisotropic materials.

• 한국전기전자재료학회논문지
• /
• 제29권8호
• /
• pp.476-482
• /
• 2016

Convectional PZT based piezoelectric ceramics have to sinter at high temperature about $1,200^{\circ}C$ for their suitable electrical properties. However, some issues: low temperature sintering piezoelectric ceramic composition and reliable internal electrode, have recently attracted a great deal of interest as a highly efficient multi-layered piezoelectric ceramics. In order to optimize low temperature sintering conditions of thick-film PMN-PZ-PT ceramic, it was investigated sintering and piezoelectric properties according to the change of $LiBiO_2$ contents. Thus, the superior piezoelectric properties were found at the pallet type PMN-PZ-PT optimized with low sintering processing at $925^{\circ}C$ including 7 wt% $LiBiO_2$ sintering aid. Consequentially, we successfully manufactured thick-film PMN-PZ-PT ceramics, which had superior piezoelectric and dielectric properties, with 5 wt% of $LiBiO_2$ sintering aid at temperature of $900^{\circ}C$.

• 한국세라믹학회지
• /
• 제37권4호
• /
• pp.295-301
• /
• 2000

The effect of V2O5 addition on the low temperature sintering of Pb(Mn1/3Sb2/3)O3-PZT ceramics, which is known as a prominent material for piezoelectric transformer application was studied, and the densification behavior and piezoelectric characteristics of the samples as a function of heating rate were also examined. V2O5 led the system to liquid phase sintering by forming liquid phase during sintering, which accelerated densification through the particle rearrangement in the early stage of sintering. The liquid phase mostly existed at grain boundaries retarded the evaporation of PbO, while the densification temperature and the weight loss of V2O5-free samples were higher than those of samples with V2O5. Faster heating improved the densification of the samples regardless of V2O5 addition. The low temperature sintering at 100$0^{\circ}C$ was achieved in PMS-PZT ceramics with high density and reasonable dielectric and piezoelectric characteristics. This result revealed optimistic way to the development of multi-layered piezoelectric transformers.

• 한국기계가공학회지
• /
• 제18권7호
• /
• pp.48-55
• /
• 2019

Soldiers have been exposed to the risk of chilblains in cold winters. Recent studies have described sensors and IOT devices that use independent power sources based on piezoelectric energy harvesting. Therefore, the heated shoes with an independent power source have been developed. For the application of energy harvesting to shoes, it is necessary to develop a unique harvester by considering human gait characteristics. Energy harvesters and ceramics were designed and fabricated in this study. The performances of these harvesters and ceramics were evaluated experimentally. Then, the harvesters and ceramics with superior performance were selected and applied to the system. Thereafter, the heating and charging performance of the system was tested under real walking conditions. The results show that the developed system can generate adequate energy to charge the battery and heat the shoes.

• 대한화학회지
• /
• 제53권1호
• /
• pp.42-50
• /
• 2009

유전율-분광법과 교류 전도도 측정 연구를 망간이 혼입된 층상구조의 $Na_{1.9}Li_{0.1}Ti_3O_7$에 시도하였다. 373-723K 온도와 100Hz-1MHz 주파수 영역에서 loss 탄젠트 (Tan$\delta$), 상대적 유전율 ($\varepsilon_{r}$) 그리고 교류 전도 도 ($\sigma_{ac}$)의 의존성을 혼입 유도체들에 대하여 조사하였다. 다양한 전도도 메커니즘이 존재하는데 MSLT-1과 MSLT-2의 경우에는 낮은 온도영역에서 전자에 의한 전도도를 보인다. MSLT-3의 경우에는 금지된 층간 이온 전 도도가 전자 전도도와 함께 존재한다. 이러한 층간 이온 전도도는 모든 혼입 유도체들에 대하여 중간 온도 영역에 존재한다. 가장 높은 온도 영역에서는 MSLT-1과 MSLT-2의 경우에는 이온 전도도와 polaron에 의한 전도도가 존재하고 MSLT-3에 대하여는 이온 전도도 만이 존재한다. 망간이 혼입된 층상구조의 $Na_{1.9}Li_{0.1}Ti_3O_7$에서 Loss 탄젠트 (Tan$\delta$)는 전자 전도도와 쌍극자의 위치, 그리고 공간 전하 분극화에 기인한다. 상대적 유전율의 증가는 층간 에 쌍극자 수의 증가에 기인하고 반면 상대적 유전율의 감소는 높은 혼입율에 따른 누전 전류의 증가에 기인한다.

• 한국재료학회지
• /
• 제13권6호
• /
• pp.360-364
• /
• 2003

$Sr_{l}$ $\pm$x/$Bi_{2}$ $\pm$y/$Ta_2$ $O_{9}$ and $Sr_{l}$ $\pm$$Bi_{x}$ $2\pm$y$Nb_2$$O_{9}$ ceramics were prepared by a solid state reaction method. X-ray diffraction analysis indicated that single-phase of Bi-layered perovskite was obtained. According to Sr/Bi content ratio, Curie temperature( $T_{c}$), electromechanical factor($K_{p}$ ) and mechanical quality factor($Q_{m}$ ) were measured. The Curie temperature of SBN(SBT) rose from $414^{\circ}C$(314$^{\circ}C$) to $494^{\circ}C$(426$^{\circ}C$) when Sr/Bi content ratio was increased. In the case of Sr/Bi content ratio = 0.55/2.3, the maximum value of the mechanical quality factor $Q_{m}$ of SBT and SBN were obtained 3320 and 1010, respectively.