• Structural Engineering and Mechanics
• /
• 제8권6호
• /
• pp.561-578
• /
• 1999

The response of a reinforced concrete structure to loading is both immediate and time-dependent. Under a sustained load, the deflections caused by creep and shrinkage may be several times their instantaneous values. The paper describes a general finite element procedure, based on the so-called layered model, to analyse reinforced concrete members, and shows in particular how the simple Step by Step Method may be incorporated into this procedure. By invoking the Modified Newton Raphson Method as a solution procedure, the accuracy of the finite element method is verified against independent test results, and then applied to a variety of problems in order to demonstrate its efficacy. The method forms a general method for analysing highly indeterminate concrete structures in the time domain.

• 한국공간구조학회논문집
• /
• 제19권1호
• /
• pp.53-64
• /
• 2019

The objective of this study is to investigate the earthquake response for the design of 100m spanned single-layer lattice dome. The plastic hinge analysis and eigenvalue buckling analysis are performed to estimate the ultimate load of single-layered lattice domes under vertical loads. In order to ensure the stability of lattice domes, it is investigated for the plastic hinge progressive status by the pushover increment analysis considering the elasto-plastic connection. One of the most effective methods to reduce the earthquake response of large span domes is to install the LRB isolation system of a dome. The authors discuss the reducing effect for the earthquake dynamic response of 100m spanned single-layered lattice domes. The LRB seismic isolation system can greatly reduce the dynamic response of lattice domes for the horizontal and vertical earthquake ground motion.

• 한국공간구조학회논문집
• /
• 제7권5호
• /
• pp.67-74
• /
• 2007

본 연구에서는 판 구조물의 최적위상을 찾기 위한 비대칭 층을 가지는 인공재료모델을 이용한 위상최적화기법을 제시하였다. 구절점 판요소를 형성하기 위하여 판의 일차전단변형을 고려하는 Reissner-Mindlin 판이론이 도입되었다. 최소화하고자 하는 변형에너지를 목적함수로 하고 구조물의 초기부피를 제약함수로 채택하였다 인공재료모델에 존재하는 다공성물질의 구멍의 크기를 조절하기 위하여 최적정기준법을 바탕으로 하는 크기조절알고리듬을 도입하였다. 제시된 위상최적화 기법의 성능을 조사하기 위하여 수치예제를 수행하였다. 수치해석결과로부터 제시된 위상최적화기법은 판구조물의 최적위상을 도출하는데 매우 효과적인 것으로 나타났다. 특히 제시된 비대칭 층모델은 판구조물의 보강재를 보다 실제적으로 도출하는데 유용할 것으로 나타났다.

• Structural Engineering and Mechanics
• /
• 제20권6호
• /
• pp.631-653
• /
• 2005

In this work, the mechanism of damping and its theoretical evaluation for layered aluminium cantilever structures jointed with a number of equispaced connecting bolts under an equal tightening torque have been considered. Extensive experiments have been conducted on a number of specimens for comparison with numerical results. Intensity of interface pressure, its distribution pattern, dynamic slip ratio and kinematic coefficient of friction at the interfaces, relative spacing of the connecting bolts, frequency and amplitude of excitation are found to play a major role on the damping capacity of such structures. It is established that the damping capacity of structures jointed with connecting bolts can be improved largely with an increase in number of layers maintaining uniform intensity of pressure distribution at the interfaces. Thus the above principle can be utilized in practice for construction of aircraft and aerospace structures effectively in order to improve their damping capacity which is one of the prime considerations for their design.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 춘계학술발표대회 논문집
• /
• pp.131-134
• /
• 2004

The object of this study is to design the Radar Absorbing Structures (RAS) having sandwich structures in the X-band $(8.2\~12.4GHz)$ frequencies. Glass fabric/epoxy composites containing conductive carbon blacks and carbon fabric/epoxy composites were used for the face sheets. Polyurethane (PU) foams containing multi­walled carbon nanotube (MWNT) were used for the core. Their permittivities in the X-band were measured using the transmission line technique. The reflection loss characteristics for multi-layered sandwich structures were calculated using the theory of transmission and reflection in a multi-layered medium. Three kinds of specimens were fabricated and their reflection losses in the X-band were measured using the free space technique. Experimental results were in good agreements with simulated ones in 10dB absorbing bandwidth.

• 한국공간구조학회지
• /
• 제19권1호
• /
• pp.18-30
• /
• 2019

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.33-36
• /
• 2008

조개껍질과 같이 얇은 요소들이 생체적인 접착제에 의해서 겹겹이 쌓여 층 구조를 이루는 패각은 정적하중 및 충격하중에 대하여 뛰어난 저항 성능을 보이는 것으로 알려져 있다. 이러한 다양한 층 구조의 복합재료는 두 개의 서로 다른 매질이 적층되면서 단일 재질의 경우보다 충격, 완화 효율이 극대화될 것이라 판단된다. 본 연구에서는 충격을 견디고 최소화시키기 위한 분절 복합체(Segmented Composites)로써 층 구조의 형태를 가지는 복합 재료를 개발하기 위해 일반 모르타르와 일반 콘크리트 블록을 이용한 보 형태의 분절 복합체 부재를 제작하여 정적하중 및 충격하중 실험을 실시하였다. 그리고 분절 복합체의 성능 및 파괴형태를 콘크리트 블록과 같은 강도로 제작된 콘크리트 보 부재와 비교하였다.

• 한국공간구조학회논문집
• /
• 제20권4호
• /
• pp.141-147
• /
• 2020

Single-layered grid space steel roof structure is an architectural system in which the structural ability of the nodal connection system greatly influences the stability of the entire structure. Many bolt connection systems have been suggested to enhance for better construct ability, but the structural behavior and maximum resistance of the connection system according to the size of bolt clearance play were difficult to identify. In particular, the identification of bending stiffness of the connection system is very important due to the characteristics of shell structures in which membrane stresses based on bending force effect significantly. To identify effective structural behavior and maximum bearing force, four representative nodal connection systems were selected and nonlinear numerical analysis were performed. The numerical analysis considering the size of the bolt clearance were performed to investigate structural behavior and maximum values of the bending force. In addition, the type of effective nodal connection system were evaluated. As a result, the connection system, which has two shear plane, represented high bending stiffness.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.297-301
• /
• 2004

The optimum design against contact crack initiation is investigated to find major parameters in designing desirable surface-coated asymmetric layered components. Hard ceramic coated soft materials with various elastic modulus mismatch are prepared for the analysis. Spherical indentation is conducted for producing contact cracks from the surface or interface between the coating and the substrate layer. A finite element analysis of the stress fields in the loaded layer components enables a direct correlation between the damage patterns and the stress distributions. Implications concerning the design of asymmetric layered components indicate that the coating thickness and the elastic modulus mismatch are important parameters for designing layered component to prevent the initiation of contact cracks.

• Macromolecular Research
• /
• 제11권2호
• /
• pp.110-114
• /
• 2003

When using the dipping method for crystal formation, mono-layered colloidal crystal structures depend upon the lift-up rate of a glass substrate. The mono-layered colloidal crystals showed the highest quality when the glass substrate was raised at a rate of 3 mm/min at 25 $^{\circ}C$ in a 1 wt% polystyrene colloidal suspension (ethanol medium). In addition, in order to obtain multiple-layered colloidal crystals, an external electric Held was introduced. Multiple-layered colloidal crystals were successfully obtained via this method. The colloidal particles were well ordered over large areas and assembled into a homogeneous structure.