• Journal of Pharmaceutical Investigation
• /
• 제27권3호
• /
• pp.213-217
• /
• 1997

The present sustained-release terfenadine-pseudoephedrine HCl dosage form was the core tablet composed of outer (fast-release) layer containing 60 mg of terfenadine and l0mg of pseudoephedrine HCl, and inner (sustained-release) layer containing 110 mg of pseudoephedrine HCl. The purpose of this study was to investigate the possibility of formulating the terfenadine-pseudoephedrine HCl double-layered tablet which was bioequivalent to the core tablet. Its sustained-release and fast-release layer were formulated with disintegrating agents and polymers, respectively, varying with their kinds and amounts. The comparative dissolution test of double-layered and core tablet was carried out at pH 1.2, 4.0 and 6.8, leading to select composite of double-layered tablet whose dissolution pattern was similar to that of core tablet. It was composed of fast-release layer containing 60mg of terfenadine. 10 mg of pseudoephedrine HCl, sodium bicarbonate, microcrystalline cellulose and sodium starch glycolate, and sustained-release layer containing 110 mg of pseudoephedrine HCl and ethylcellulose/hydroxypropyl methylcellulose) (110/30 mg/tablet).

• 소음진동
• /
• 제8권4호
• /
• pp.632-642
• /
• 1998

A method based on finite element discretization is developed for optimizing the polarization profile of PVDF film to create the modal transducer for specific modes. Using this concept, one can design the modal transducer in two-dimensional structure having arbitrary geometry and boundary conditions. As a practical means for implementing this polarization profile without repoling the PVDF film the polarization profile is approximated by optimizing electrode patterns, lamination angles, and poling directions of the multi-layered PVDF transducer. This corresponds to the approximation of a continuous function using discrete values. The electrode pattern of each PVDF layer is optimized by deciding the electrode of each finite element to be used or not. Genetic algorithm, suitable for discrete problems, is used as an optimization scheme. For the optimization of each layers lamination angle, the continuous lamination angle is encoded into discrete value using binary 5 bit string. For the experimental demonstration, a modal sensor for first and second modes of cantilevered composite plate is designed using two layers of PVDF films. The actuator is designed based on the criterion of minimizing the system energy in the control modes under a given initial condition. Experimental results show that the signals from residual modes are successfully reduced using the optimized multi-layered PVDF sensor. Using discrete LQG control law, the modal peaks of first and second modes are reduced in the amount of 12 dB and 4 dB, resepctively.

• Structural Engineering and Mechanics
• /
• 제69권1호
• /
• pp.51-67
• /
• 2019

In this paper, the anisotropy of tensile behaviours of layered rocks consisting internal notch has been investigated using particle flow code. For this purpose, firstly calibration of PFC2D was performed using Brazilian tensile strength. Secondly Brazilian test models consisting bedding layer was simulated numerically. Thickness of layers was 10 mm and layered angularity was $90^{\circ}$, $75^{\circ}$, $60^{\circ}$, $45^{\circ}$, $30^{\circ}$, $15^{\circ}$ and $0^{\circ}$. The strength of bedding interface was too high. Each model was consisted of one internal notch. Notch length is 1 cm, 2 cm and 4 cm and notch angularities are $60^{\circ}$, $45^{\circ}$, $30^{\circ}$, $15^{\circ}$ and $0^{\circ}$. Totally, 90 model were tested. The results show that failure pattern was affected by notch orientation and notch length. It's to be noted that layer angle has not any effect on the failure pattern. Also, Brazilian tensile strength is affected by notch orientation and notch length.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.892-899
• /
• 2008

In this research, adapted was the 'Image Layered Technique(ILT)' to determine the character-line of the nose. Moreover, to derive the image of the front and side views of the nose, analyzed were the heads of animals and transportations. Presented was the pattern with the image to determine the volume with a front outline. Also, the image to be suggested to 'ILT' was applied to a front character design.

• 전자공학회논문지B
• /
• 제31B권12호
• /
• pp.100-107
• /
• 1994

This article describes the hardware design scheme of Hamming MAXNET algorithm which is appropriate for binary pattern classification with minimum HD measurement between stimulus vector and storage vector. Circuit integration is profitable to Hamming MAXNET because the structure of hamming network have a few connection nodes over the similar neuro-algorithms. Designed hardware is the two-layered structure composed of hamming network and MAXNET which enable the characteristics of low power consumption and fast operation with biline volgate sensing scheme. Proposed Hamming MAXNET hardware was designed as quantize-level converter for simulation, resulting in the expected binary pattern convergence property.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1999년도 추계학술발표회요약집
• /
• pp.194-194
• /
• 1999

• 대한임베디드공학회논문지
• /
• 제12권5호
• /
• pp.303-310
• /
• 2017

Underwater robots operating in constrained underwater environment have requirements for software systems. Firstly, it is necessary to provide reusable common software components for hardware interface of sensors and actuators that are frequently used in underwater robots. Secondly, it is required to support distributed execution environment on multiple embedded controllers. Thirdly, it is need to implement a monitoring system capable of high-speed and large-data transmission for underwater robots operating in an environment where it is difficult to check the robot status. For these requirements, we have designed the layered architecture pattern and applied several design patterns to enhance the reusability and the maintainability of software components, In addition, we overlaid the broker architecture pattern to support distributed execution environments. Finally, we implemented the underwater robot software system using ROS framework based on the software architecture design. In order to evaluate the performance of the implemented software system, we performed an experiment to measure the response time between components and the transmission rate of the monitoring data, and obtained the results satisfying the required performance.

• 한국전자파학회논문지
• /
• 제18권3호
• /
• pp.323-333
• /
• 2007

본 논문에서는 구형 빔 패턴을 효율적으로 형성하기 위한 새로운 MDAS-DR 안테나 구조를 제안하였다. 안테나 구조는 크게 스택 마이크로스트립 패치 여기 소자, 다층 원형 도체 배열 소자들과 그 주위를 에워싸고 있는 유전체 링으로 구성된다. 다층 원형 도체 배열 구조는 스택 마이크로스트립 패치 여기 소자에 의해 방사 전력을 공급 받아 그 주변의 유전체 링과의 전기적 상호 결합 작용에 의해 원거리에서 구형 빔 방사 패턴을 형성할 수 있다. 유전체 링 구조의 설계 변수는 다층 원형 도체 배열 구조의 설계 변수와 더불어 구형 빔 패턴 형성에 중요한 설계 변수들로서 구형 빔 안테나를 위해 12개의 다층 원형 도체 배열과 유전율이 2.05인 테프론 유전체가 사용되었다. 제안된 안테나 구조의 유효성을 검증하기 위하여 10 GHz 대역$(9.6\sim10.4\;GHz)$에서 동작하는 안테 나를 설계하였으며, 시뮬레이션에는 삼차원 안테나 구조 해석에 적합한 상용 CST Microwave $Studio^{TM}$ 시뮬레이터가 사용되었다. 또한, 안테나 시제품을 제작한 후 무반사실 안테나 챔버에서 전기적 특성들을 측정하였다. 구형 빔 패턴 형성을 갖는 안테나 시제품의 측정 결과들은 시뮬레이션 결과들과 잘 일치하였으며, 측정 결과들로부터 MDAS-DR 안테나의 10 GHz에서의 측정 이득은 11.18 dBi이었으며, 최소한 8.0 % 대역 폭 내에서 약 $40^{\circ}$의 양호한 구형 빔 패턴을 형성함을 확인할 수 있었다.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1999년도 학술발표대회 논문집 제18권 2호
• /
• pp.237-242
• /
• 1999

In this study, a design method using plane actuator is developed to make new speaker system, whose shape is much thinner than that of conventional loudspeaker. Piezofilm(PVDF) is used as plane actuator of flat speaker. To avoid the distortion of sound radiated from flat speaker, the frequency response of radiated sound to be flat is taken as the design objective. The electrode pattern and orientation angle of piezofilm actuator is optimized to satisfy the design objective. The formulation is based on the coupled finite element and boundary element method. Genetic algorithm is used in the optimization process, which is useful in the optimization of discrete design variables. Frequency response with optimized piezofilm actuator is made flat enough to satisfy the design objective. For the enhancement of sound power, double-layered piezofilm actuators are also considered. The sound power with double-layered actuator becomes larger than that with single-layered actuator as expected.

• 한국결정성장학회지
• /
• 제8권1호
• /
• pp.36-41
• /
• 1998

유기화합물인 alkyl sulfonate를 층상이중수산화물에 삽입시킨 화합물을 합성하였다. X-선 회절 데이터와 alkyl sulfonate의 분자의 크기를 비교하여 층간 삽입된 alkyl sulfonate의 공간배열을 확입하였다. 층간 삽입된 alkyl sulfonate의 분자 사슬이 이중수산화물의 층에 수직되며 서로 반대 방향으로 배열되어 있음을 확인하였다.