• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권4호
• /
• pp.1442-1462
• /
• 2014

Packet classification is a key technology of the Internet for routers to classify the arriving packets into different flows according to the predefined rulesets. Previous packet classification algorithms have mainly focused on search speed and memory usage, while overlooking update performance. In this paper, we propose PreCuts, which can drastically improve the update speed. According to the characteristics of IP field, we implement three heuristics to build a 3-layer decision tree. In the first layer, we group the rules with the same highest byte of source and destination IP addresses. For the second layer, we cluster the rules which share the same IP prefix length. Finally, we use the heuristic of information entropy-based bit partition to choose some specific bits of IP prefix to split the ruleset into subsets. The heuristics of PreCuts will not introduce rule duplication and incremental update will not reduce the time and space performance. Using ClassBench, it is shown that compared with BRPS and EffiCuts, the proposed algorithm not only improves the time and space performance, but also greatly increases the update speed.

• 한국재난정보학회 논문집
• /
• 제11권4호
• /
• pp.534-541
• /
• 2015

본 연구는 양단이 단순지지된 조건을 갖는 다층 원통쉘을 해석하는 방법을 제시하였고, 3차원 응력 특성을 규명한 것이다. 지배방정식은 편미분방정식을 상미분방정식으로 변환을 가정한 유한요소 개념을 이용하여 유한대판법 해석법을 이용하여 수치해서하였다. 특히 단순지지 조건을 갖는 3차원 다층원통쉘에 대해서는 시행함수로서 삼각함수로 구성되는 보의 고유함수로 구성되는 경우에 대해 해석하였다. 층 재료는 강재 또는 콘크리트로하고 층두께, 원통길이 등 파라메터를 다양하게 변화시켜 다층원통쉘에 미치는 영향을 검토한다.

• 한국광물학회지
• /
• 제11권2호
• /
• pp.106-116
• /
• 1998

The adsorption of Cs-137 and Sr-90 onto kaolinite in prescence of major groundwater cations (Ca2+, K+, Na+) with different concentrations was simulated by using triple-layer surface complexation model (TL-SCM). The site density (8.73 sites/nm2) of kaolinite used for TL-SCM was calculated from it's CEC and specific surface area. TL-SCM modeling results indicate that concentrations dependence on 137Cs and 90Sr adsorption onto kaolinite as a function of pH is best modeled as an outer-sphere surface reaction. This suggests that Cs+ and Sr2+ are adsorbed at the $\beta$-layer in kaolinite-water interface where the electrolytes, Nacl, KCl and CaCl2, bind. However, TL-SCM results on Sr adsorption show a discrepancy between batch data and fitting data in alkaline condition. This may be due to precipitation of SrCO3 and complexation such as SrOH+. Intrinsic reaction constants of ions obtained from model fit are as follows: Kintcs=10-2.10, KintSr=10-2.30, KintK=10-2.80, KintCa=10-3.10 and KintNa=10-3.32. The results are in the agreement with competition order among groundwater ions (K+>Ca2+>Na+) and sorption reference of nuclides (Cs-137>Sr-90) at kaolinite-water interface showed in batch test.

• 한국수소및신에너지학회논문집
• /
• 제23권4호
• /
• pp.293-299
• /
• 2012

The serpentine flow channel is widely used in polymer electrolyte membrane fuel cells (PEMFCs) to prevent flooding phenomena because it effectively removes liquid water in the flow channel. The pressure drop between inlet and outlet increases as compared with straight channels due to minor losses associated with the corners of the turning configurations. This results in a strong pressure gradient between adjacent channels in specific regions, where some amount of reactant gas can be delivered to catalyst layers by convection through a gas diffusion layer (GDL). The enhancement of the convective flow in the GDL, so-called bypass flow, affects fuel cell performance since the bypass flow influences the reactant transport and thus its concentration over the active area. In the present paper, for the bipolar plate design, a simple analytic model has been proposed to predict the bypass flow in the serpentine type flow channels and validated with three-dimensional numerical simulation results.

• 대한소아치과학회지
• /
• 제1권1호
• /
• pp.9-17
• /
• 1974

The purpose of this study was to clarify the relationship between dental caries status, and the content of fluoride in drinking water, and the content of fluoride in enamel of deciduous teeth of Korean children. The specific areas selected in this study were Asan-Kun and Seouchon-Kun (Chung Cheoung Nam-Do) where the fluoride content in the deep well water were 0.9 ppm and 0.4 ppm respectively. The dental caries status of 720 children aged 6 to 11 who have been lived since birth was detected. The following results were obtained upon this study: 1. The def person rate, deft rate and def index of the Asan-Kun children were revealed 46.11%, 14.41% and 1. 69 respectively. The fluoride content in the outer layer of enamel was 430 ppm. 2. The def person rate, deft rate and def index of the Seouchon-Kun children were revealed 59.17%, 20.97% and 2.40 respectively. The fluoride content in the outer layer of enamel was 391 ppm. 3. The def person rate, deft rate and def index of the Asan-Kun children were showed lower value than the Seouchon-Kun children. The fluoride content of the outer layer of enamel of the Asna-Kun children were showed higher value than the Seouchon-Kun children.

• 한국재료학회지
• /
• 제12권5호
• /
• pp.341-346
• /
• 2002

In order to improve the low wear resistance of Ti-6Al-4V alloy, plasma carburization treatment was newly carried out without consumption of its good specific strength and fatigue life over the temperature. Effect of the plasma carburization was analyzed and compared with the non-treated alloy by microstructural observation, structure characterization and mechanical property test. The plasma treated alloy formed a carburized layer of about 150$\mu\textrm{m}$ in depth from the surface, where a fine and hard particles of TiC and $V_4C_3$ were homogeneously dispersed through the layer. It was also found that an increase of the wear resistance, fatigue life and hardness, due to the hard and fine dispersoids.

• Journal of Electrochemical Science and Technology
• /
• 제9권1호
• /
• pp.20-27
• /
• 2018

We describe a redox-enhanced electric double-layer capacitor (EDLC) that turns the electrolyte in a conventional EDLC into an integral, active component for charge storage-charge is stored both through faradaic reactions with soluble redox-active molecules in the electrolyte, and through the double-layer capacitance in a porous carbon electrode. The mixed-redox electrolyte, composed of vanadium and iodides, was employed to achieve high power density. The electrochemical reaction in a supercapacitor with vanadium and iodide was studied to estimate the charge capacity and energy density of the redox supercapacitor. A redox supercapacitor with a mixed electrolyte composed of 0.75 M NaI and 0.5 M $VOSO_4$ was fabricated and studied. When charged to a potential of 1 V, faradaic charging processes were observed, in addition to the capacitive processes that increased the energy storage capabilities of the supercapacitor. The redox supercapacitor achieved a specific capacity of 13.44 mAh/g and an energy density of 3.81 Wh/kg in a simple Swagelok cell. A control EDLC with 1 M $H_2SO_4$ yielded 7.43 mAh/g and 2.85 Wh/kg. However, the relatively fast self-discharge in the redox-EDLC may be due to the shuttling of the redox couple between the polarized carbon electrodes.

• 한국표면공학회지
• /
• 제56권2호
• /
• pp.115-124
• /
• 2023

Anodization is an electrochemical process that electrochemically converts a metal surface into an oxide layer, resulting in enhanced corrosion resistance, wear resistance, and improved aesthetic appearance. Local anodization, also known as selective anodization, is a modified process that enables specific regions or patterns on the metal surface to undergo anodization instead of the entire surface. Several methods have been attempted to produce oxide layers via localized anodic oxidation, such as using a mask or pre-patterned substrate. However, these methods are often intricate, time-consuming, and costly. Conversely, the direct writing or patterning approach is a more straightforward and efficient way to fabricate the oxide layers. This review paper intends to enhance our comprehension of local anodization and its potential applications in various fields, including the development of nanotechnologies. The application of anodization is promising in surface engineering, where the anodic oxide layer serves as a protective coating for metals or modifies the surface properties of materials. Furthermore, anodic oxidation can create micro- and nano-scale patterns on metal surfaces. Overall, the development of efficient and cost-effective anodic oxidation methods is essential for the advancement of various industries and technologies.

• 융합보안논문지
• /
• 제23권5호
• /
• pp.73-79
• /
• 2023

사이버 위협은 기술의 발전에 따라 진화되고 정교해지고 있으며, DDoS 공격으로 인한 서비스 장애를 발생 이슈들이 증가하고 있다. 최근 DDoS 공격은 특정 서비스나 서버의 도메인 주소에 대량의 트래픽을 유입시켜 서비스 장애를 발생시키는 유형이 많아지고 있다. 본 논문에서는 대역폭 소진 공격의 대표적인 공격 유형인 Syn Flooding 공격의 데이터를 생성 후, 효과적인 공격 탐지를 위해 Random Forest, Decision Tree, Multi-Layer Perceptron, KNN 알고리즘을 사용하여 비교 분석하였고 최적의 알고리즘을 도출하였다. 이 결과를 토대로 Syn Flooding 공격 탐지 정책을 위한 기법으로 효과적인 활용이 가능할 것이다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1658_1659
• /
• 2009

PLS(Pohang Light Source) will begin the PLS-II project that has been funded by the KOREA Government in order to further upgrade the PLS which has operated since 1992. The control system of the PLS-II has distributed control architecture, with two layers of hierarchy; operator interface computer (OIC) layer and machine interface computer (MIC) layer. The OIC layer is based on SUN workstation with UNIX. A number of PC-based consoles allow to remotely operating the machine from the control room. PC-based consoles use the Linux or Windows operation system. Similar consoles in the experimental hall are used to control experiments. The MIC layer is directly interfaced to individual machine devices for low-level data acquisition and control. MIC layer is based on VMEbus standard with vxWorks real-time operating system. Executable application software modules are downloaded from host computers at the system start-up time. The MIC's and host computers are linked through Ethernet network. It should enable the use of hardware and software already developed for specific light source requirements. The core of the EPICS (Experimental Physics and Industrial Control System)[1] has been chosen as the basis for the control system software.