• Korean Journal of Veterinary Research
• /
• v.39 no.5
• /
• pp.1006-1012
• /
• 1999

This study was conducted to evaluate the ELISA kit for measuring the level of cortisol in the urine. The CV of within-run variation and day to day variation were 0.4~2.8 and 1.8~5.7, respectively. The minimum limitation of measurement was 1ng/ml. The cross reaction was high ($CR_{50}(%)=11.4{\sim}43.2$) in prednisolone, 11-deoxycortisol, 21-deoxycortisol and predinosone. There was low and no cross reaction in other steroid. To develop the ELISA kit we measured the cortisol level in diluted urine with PBS (procedure I), extracted urine with methylene chloride (procedure II) and extracted methylene chloride-extracted urine from thin-layer chromatography (procedure III). The CV value of procedure I, II, III was 9.4~28.3%, 7.2~8.9% and 2.5~5.7%, respectively. There was significant difference between procedure I with II, and pro-cedure I with III(p < 0.01), but no difference between procedure II with III significantly(p < 0.01). The mean UCCR of urine collected through am 8 to 10 was $9.5{\pm}7.6$(0.14~28.0) in 12-month-old dog(n = 47). In this study we can measure the cortisol level in extracted urine with methylene chloride and sequential thin-layer chromatography accurately using ELISA kit.

• The Korean Journal of Physiology and Pharmacology
• /
• v.7 no.6
• /
• pp.317-323
• /
• 2003

Interneuron diversity is one of the key factors to hinder understanding the mechanism of cortical neural network functions even with their important roles. We characterized inhibitory interneurons in layer II/III of the rat primary visual cortex, using patch-clamp recording and confocal reconstruction, and classified inhibitory interneurons into fast spiking (FS), late spiking (LS), burst spiking (BS), and regular spiking non-pyramidal (RSNP) neurons according to their electrophysiological characteristics. Global parameters to identify inhibitory interneurons were resting membrane potential (＞-70 mV) and action potential (AP) width (＜0.9 msec at half amplitude). FS could be differentiated from LS, based on smaller amplitude of the AP (＜∼50 mV) and shorter peak-to-trough time (P-T time) of the afterhyperpolarization (＜4 msec). In addition to the shorter AP width, RSNP had the higher input resistance (＞200 $M{Omega}$) and the shorter P-T time (＜20 msec) than those of regular spiking pyramidal neurons. Confocal reconstruction of recorded cells revealed characteristic morphology of each subtype of inhibitory interneurons. Thus, our results provide at least four subtypes of inhibitory interneurons in layer II/III of the rat primary visual cortex and a classification scheme of inhibitory interneurons.

• Journal of Chest Surgery
• /
• v.20 no.3
• /
• pp.451-457
• /
• 1987

Reoperations following cardiac surgery have an increased risk of the danger of damaging the heart, great vessels or extracardiac grafts because of adhesions to the sternum. We experimentally evaluated 3 different methods for pericardial closure. A standardized procedure for induction of pericardial adhesions was carried out in 30 rabbits. For closure of pericardium, animals were divided into 3 groups, 10 animals respectively: Croup 1 [simple pericardial closure]The pericardium was primarily resuture; Group 2 [Core-Tex surgical membrane as a pericardial substitute]- A Gore-Tex surgical membrane was interposed between the sternum and the heart; and Group 3 [pericardial tension releasing technique]-Three longitudinal overlapping incisions were made on the right side of the pericardium while the midline incison was sutured. Animals were put to death 4 weeks postoperatively and the pericardial space was examined for pericardial adhesions and epicardial reactions. The extent of adhesions and reactions were graded as: I-none; II-minimal; III-moderate; and IV-severe. Histologic studies of the pericardium, the pericardial substitute and the epicardium were also performed. The results were as follows: 1. In group 1 [simple pericardial closure], the degree of pericardial adhesions were grade I in 1 animal, grade II in 2, grade III in 4 and grade IV in 3. Epicardial reactions were grade I in 1 animal, grade II in 3, grade III in 5 and grade IV in 1. Histologic examination revealed thick fibrous tissue that obliterated the pericardial space in 7 animals. 2. In group 2 [Gore-Tex surgical membrane as a pericardial substitute], the degree of pericardial adhesions were grade I in 3 animals, grade II in 3, grade III in 2 and grade IV in 2. The degree of epicardial reactions were grade II in 1 animal, grade III in 5 and grade IV in 4. Histologic studies revealed a thin layer of dense fibrous tissue which covered the Gore-Tex surgical membrane and thick loose fibrous tissue on the epicardium just beneath the substitute. 3. In group 3 [pericardial tension releasing technique], the degree of pericardial adhesions were grade I in 3 animals, grade II in 4, grade III in 2 and grade IV in 1. The degree of epicardial reactions were grade 1 in 4 animals, grade II in 4 and grade III in 2. Severe epicardial reactions were not observed in this group. Histologic examination showed normal epicardium in 4 animals and the epicardium of the other 6 animals only revealed very thin fibrous layer compared to group I and group II. Pericardial adhesions more than grade III were 70% in group 1, 40% in group 2 and 30% in group 3. Pericardial adhesions were reduced in group 2 and group 3 compared to group 1, but statistically not significant. Epicardial reactions more than grade III were 60% in group 1, 90% in group 2 and 20% in group 3. Epicardial reactions were significantly reduced in group 3 compared to group 2. Author`s modified pericardial releasing technique provides marked augment of pericardial surface area and facilitates tension-free pericardial closure. Furthermore, pericardial adhesion and epicardial reaction will be reduced with the pericardial tension releasing technique.

• Korean Journal of Plant Resources
• /
• v.33 no.5
• /
• pp.482-500
• /
• 2020

The purpose of this study was to identify the phytosociological vegetation structure through a sampling survey of Mt. Jirisan National Park. And it was conducted to provide the latest data for establishing a conservation and management plan for forest ecosystems. As a result of TWINSPAN classification, it was classified into 4 communities. Group I is the Fraxinus mandshurica - Acer pseudosieboldianum Community, group II is the Quercus serrata - Quercus variabilis Community, group III is the Quercus mongolica Community, group IV is the Pinus densiflora Community. Group I is dominated by Fraxinus mandshurica in the canopy layer, and Cornus controversa and Quercus mongolica compete and maintain dominance. Group II is dominated by Quercus variabilis and Quercus serrata in canopy layer, and Styrax obassia and Styrax japonicus compete in sub-tree layer. In group III, Quercus mongolica has a high dominance of 67% in canopy layer and 27% in the sub-tree layer, and Acer pseudosieboldianum competes with the Quercus mongolica in the sub-tree layer. In group IV, Pinus densiflora showed a high dominance of 74% in canopy layer. The sub-tree layer is dominated by Quercus mongolica, and is accompanied by competition between Carpinus tschonoskii and Fraxinus sieboldiana.

• Journal of Welding and Joining
• /
• v.18 no.5
• /
• pp.105-111
• /
• 2000

The wear behavior of thermal sprayed AlSiMg-40TiC composite coatings were studied as a function of load and sliding velocity under unlubricated conditions. Experiments were performed using a block-on-ring(WC-6wt%/Co, Hv 1500) type. The tests were carried out a various load(30∼ 125.5N) and sliding velocity(0.5∼2.0m/s). Three wear rate regions were observed in the AlSiMg-40TiC composite coatings. The wear rate in region I at low load (less then 8N( were less than 1×{TEX}$10^{-5}${/TEX}㎣/m. Low wear rates in region I resulted from the load-bearing capacity of TiC particles. The transition from region I to II occurred when the applied load exceeded the fracture and pull-out strength of the particles. The TiC fractured particles trapped between the specimen and the counterface acted as third-body abrasive wear. The subsurface layer worn surface in region II was composed of the mechanically mixed layer (MML). The wear rate increase abruptly above a critical load (region III). The high wear rate in region III was induced by frictional temperature and involves massive surface damage.

• Journal of the Korean Geographical Society
• /
• v.31 no.3
• /
• pp.447-468
• /
• 1996

The peat layer was deposited on the abandoned channel of incised meander of River Banbyuncheon with 7 meter thickness on Youngyang basin. The late Quaternary environmental change on the study area was discussed based on pollen anaalysis and radiocarbon-dating from this peat. The swamp which was caused to sediment the peat, was produced by which the fan debris from the adjacent slope damed the waterflow on the abandoned channel. The peat layer contains continuous vegetational history from 60,000y.B.P. to Recent. The peat deposit was divided into two layers by the organic thin sand horizon, which was sedimented at one time and made unconformity between the lower decomposed compact peat layers and the upper fresh fiberous peat layer. As the result of the pollen analysis, both peat layers from the two boring sites, Profile YY1 and Profile YY2 were divided into five Pollenzones(Pollenzone I, II, III, IV and V) and 12 Subzones which were mainly corresponded by the AP (Arboreal Pollen)-Dominance. The two profiles have some differences on the sedimentary facies and on the pollen composition as well. Therefore these were in common with the Pollenone III, however the Pollenzone I and II existed only on the Profile YY1 and the Pollenzone IV and V existed only on the Profile YY2. The lower layer containing the Pollenzone I, II and III revealed vegetational records of Pleistocene, which was characterized as tundra-like landscape and thin forested landscapes. It represented the NAP (Non-Arboreal Pollen)-period with a plenty of Artemisia sp., Sanguisorba sp., Umbelliferae, Gramineae and Cyperaceae. However a relatively high proportion of the boreal trees with Picea sp., Pinus sp. and Betula sp. as AP was observed in the lower layer. The upper layer contained the Pollenzone IVb and V and vegetational history in Holocene which was characterized by thick forested landscape with rich tree pollen. It represented AP-period with plenty of Pinus sp. and Quercus sp. as temperate trees. The temperature fluctuation supposed from the vegetational records is as follows; the Pollenzone I(Betula-Dominance, about 57,000y.B.P.) represents relatively cold period. The Pollenzone II(EMW-Domi-nance, 57,000-43,000y.B.P.)represents relatively warm period. This period is supposed to be Interstadial, the transi-tional stage from Alt- to Mittel Wurm. The Pollenzone III(Butula-, Pinus- and Picea-Dominace in turns, 43,000-15,000y.B.P.) reproesents cold period which had been built from Mittel-to Jung Wurm. Especially the Subzone IIId represents the coldest period throughout the Pollenzone III. It is corresponds to Wurm Glacial Maximu. It is supposed that the mean temperature in July of this period was coller about 10${^\circ}$C than present. The Pollenzone IV and V represent the vegetational history of Holocene. Tilia, Quercus and Pinus were dominant in turns during this period. Subzone IVb and Pollenzone I and II at east coastal plain of Korean penninsula reported by JO(1979).

• Restorative Dentistry and Endodontics
• /
• v.35 no.1
• /
• pp.30-39
• /
• 2010

This study evaluated the influence of the type of restoration and the amount of interdental spacing on the stress distribution in maxillary central incisors restored by means of porcelain laminate veneers and direct composite resin restorations. Three-dimensional finite element models were fabricated to represent different types of restorations. Four clinical situations were considered. Type I, closing diastema using composite resin. Labial border of composite resin was extended just enough to cover the interdental space; Type II, closing diastema using composite resin without reduction of labial surface. Labial border of composite resin was extended distally to cover the half of the total labial surface; Type III, closing diastema using composite resin with reduction of labial surface. Labial border of the preparation and restored composite resin was extended distally two-thirds of the total labial surface; Type IV, closing diastema using porcelain laminate veneer with a feathered-edge preparation technique. Four different interdental spaces (1.0, 2.0. 3.0, 4.0 mm) were applied for each type of restorations. For all types of restoration, adding the width of free extension of the porcelain laminate veneer and composite resin increased the stress occurred at the bonding layer. The maximum stress values observed at the bonding layer of Type IV were higher than that of Type I, II and III. However, the increasing rate of maximum stress value of Type IV was lower than that of Type I, II and III.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.329-332
• /
• 1999

Currently, the most important technology is compression methods in the multimedia society. In audio compression, the method using human auditory nervous property is used. This method using psychoacoustical model is applied to perceptual audio coding, because human's audibility is limited. MPEG-II AAC(Advanced Audio Coding) is the most advanced coding scheme that is of benefit to high quality audio coding. The compression ratio is 1.4 times compared with MPEG-I layer-III. In this paper, the vector processor for MDCT/IMDCT(Modified Discrete Cosine Transform /Inverse Modified Discrete Cosine Transform) of MPEG-II AAC is designed.

• The Korean Journal of Malacology
• /
• v.4 no.1
• /
• pp.1-16
• /
• 1988

The authors observed histochemical and ultrastructural characters on the osphradium of Rapana venosa Valenciennes using light microscope, scanning and transmission electron microscpes. The results were as follows:1)The basic structure of osphradium was bipectinated shape, which consisted of a septum situating in the center of osphradium and numerous osphradial leaflets. On the other hand, Epidermis of ospradial leaflets formed the structure of pseudostratified ciliated columnar epithelium which was composed of an epithelial cell layer, a basal cel layer and a neuropile. 2) Ciliated dpithelial cells:A large number of these cells were observed on the lateral and ventral regions but a small number of them were observed on the dorsal region. These cells had cylindrical microvilli, slender mitochondria and serve fibers.3) Supporting cells: These cells had cylindrical microvilli, spongy layer, electron dense granules, mitochondria and nerve fibers4) Four types secretory epothelial cells: Four distinct types of secretory epithelial cells were recognized and were arbitrily designated as Type I, Type II, Type III and Type IV.cell type I: These cells contained electron denwe granules(diameter, 0.94-1.56${\mu}{\textrm}{m}$), well developed Golgi apparatus and rough endoplasmic reticula, cell type II: These cills contained two types of granules of the different electron density. One was high electron density granules which were 0.4-1.0${\mu}{\textrm}{m}$ in diameter, The other was low electron density granules which were 0.75-1.2${\mu}{\textrm}{m}$ in diameter.cell type III:These cells had fibrous secretory materials and exhibited strongly positive reaction with Toluidine blue.cell type IV:A large number of this type of cells were observed on the ventral region of ospgradial leaflets and positively reacted with periodic acid Schiff reagent. 5)Dark cells contained several electron dense cillaty rootlets and unmerous granules but cellular organelles were not observed.6) Four types basal cells: Four distinci types of basal cells were recognized and arbitrarily designated as Type I, Type II, Type III and Type IV.Cell type I(light cell): These cells exhibited low electuon density and contained short smooth endoplasmic reticula, several vacuoles and granules.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.6
• /
• pp.532-540
• /
• 2010

The strength properties of wooden model retaining wall made of pitch pine (Pinus rigida Miller) was evaluated. Three different types of wooden model retaining wall were made of the 11cm square timber treated with CUAZ-2 (Copper Azole). The retaining wall was made into the 4 layers of crossbar and the 3 layers of vertical-bar, of which the size was 86 cm high, 200 cm long and 96 cm wide. Type I was control and in Type II 20 cm vertical-bars and 93 cm vertical-bars were arranged alternately to decrease wood usage. TypeIII was similar to TypeII except that the connection between crossbars was reinforced with the wooden armature. In each type, the strength properties of retaining wall were investigated by horizontal loading test and the deformation of structure by image processing (AICON 3D DPA-PRO system). In horizontal loading test of Type I, Type II and Type III was 63.17, 57.80, and 60.97 kN/m, respectively. The deformation of the top layer in Type II was 1.5 times larger than in Type I and Type III. Consequently, the economic efficiency and strength performance were better in Type III than in Type I and Type II.