• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.400-403
• /
• 2004

In conventional methods, the availability of floating crane has determined the size of a concrete caisson. However, this paper introduces a new method for larger caisson production that make it possible to complete caisson fabrication and launch out without use of floating crane. The new method carries out multi-step fabrication of caisson and horizontal transfer of caisson on a single casting bed which consists of collapsible soffit form, trough, aero go watercaster system or low frictional PTFE added jacking system, half-submergible floating dock. To make the new method successfully launched, the static and dynamic analysis is carried out to obtain the stability of caisson launching and experimental research is conducted in evaluating friction occurred between PTFE pad and steel track. Lastly, the comparison of the new method and the conventional method are detailed. With significant benefits in construction costs reduction and construction time reduction, this new method in this paper would be recommended for extensive application in large port and harbor construction projects.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1293-1299
• /
• 2010

Daegu urban railroad line 3 is introduced with straddle-type monorail system within the country at the first time. This system is long line with 24km in total length which has not the results of construction in Korea. The rail beam of monorail bridge to be constructed/ installed in the city is adopted on the basis of the PSC rail beam. It is required to apply the steel rail beam at rapid/ curved line parts or location to be required the long span bridge as passing river and intersection. The composition of span bridge is various and the height of bridge is change with each section and exist the different curve radius due to all section is passes in the city. The rail beam shall be considered the ground conditions and then consider the construction methods. It is analyzed to construction period of PSC rail beam to be linked with period of infrastructure construction and construction of steel rail beam, structure construction of station etc. It is compared to crane construction methods and launching girder as alternative construction methods and propose to upper construction methods which is superior in economic and construction.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.11
• /
• pp.78-87
• /
• 1996

in urban cross-roads with dense buildings, receiving power and delay spread were computed when doing these, we were able to develope codes to be executed in a very fast time by combining image method and algorithm for propagation paths compairing with ray launching technique. And receiving power and delay spread could be viewed in 3-dimensional picture by virtue of computing electric fields in arbitrary receiving point. For numerical computation, receiving power of wide and anrrow band and delay spread were computed, and extension method of ray numbers was facilitated for handling infinite number of rays.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1430-1435
• /
• 2003

Satellite upper platform is optimized by response surface method which has non-gradient, semi-glogal, discrete and fast convergency characteristics. Sampling points are extracted by design of experiments using Central Composite Method and Factorial Design. Also response surface is generated by the various regression functions. Structure analysis is execuated with regard for static and dynamic environment in launching stage. As a result response surface method is superior to other optimization method with respect to optimum value and cost of computation time. Also a confidence is varified in the various regression models.

• Proceedings of the KSR Conference
• /
• 1999.05a
• /
• pp.434-441
• /
• 1999

The newly proposed Precast Segmental Mettled (PSM), which makes use of precast elements for election, is relatively new, efficient and fast mettled for the construction of prestressed box girder bridges. A precast segment of 25m long pretensioned in the fabrication yard is transported by a special trailer and a launching truss to its final position. The segments are then connected in the site by post-tensioning to make a continuous prestressed concrete box girder bridges. The purpose of this parer is to analyze and evaluate the design of precast prestressed concrete box girder bridges. The detailed analyses including time-dependent behavior of PSM bridges are conducted. The major results and findings, which have been obtained from finite element analysis of PSM bridge, are discussed in this paper and these results will be a good base for the design and analysis of a new precast bridges.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.5
• /
• pp.2067-2073
• /
• 2018

This paper will present the design of a novel-type velocity-controllable electromagnetic coil launcher (EMCL). By studying the influence of initial capacitor voltage on the velocity of an EMCL, the launcher voltage can be set to precisely adjust the velocity of projectile launching. The simulation of voltage and velocity in relation to time is obtained by Maxwell software. The experimental data show that for the launch accuracy to be achievable, the actual precision is 2%. Because of the excellent performance of Velocity-controllable EMCL, it can replace the air gun and applied to split Hopkinson pressure bar (SHPB).

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.519-524
• /
• 2008

A numerical study is conducted to investigate propulsion performance enhancement based on S225 experiment case of ISL(French-German Research Institute of Saint-Louis)'s superdetonative ram accelerator. For govern equation, multi-species Navier-Stokes equation coupled with Baldwin-Lomax turbulence modeling is used. Govern equation is discretized by Roe's FDS and integrated by LU-SGS time integration. Detailed chemical reaction about $H_2/O_2/CO_2$ for high pressure is considered. $2H_2+O_2+2.5CO_2$ mixture was used for propellant gas. For the same over-driven factor, the launching speed of computation was faster than one of S225. Another configuration and condition of S225 was applied. A flame structure is very different from S225. For strong mixture case, it shows ignition by viscous effect. Acceleration and speed increment is higher than S225 computation and experiment. By using more strong mixture, propulsion performance was enhanced.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2004.05a
• /
• pp.1259-1262
• /
• 2004

Detecting environmental hazards and monitoring remote terrain are among many sensor network applications. In case of fire detection, it is significantly valuable to monitor fire-spot's shape and trend in time. Mobile ad hoc sensor nodes right round are responsible for sensoring, processing and networking packets, or even launching extinguisher. In this paper, we proposed a ring-oriented Multicast architecture based on "Fisheye State Routing" (MFSR) to organize a group of mobile ad hoc sensor nodes in a multicast way. It is familiar with traditional mesh-based multicast protocol [1] in mobile ad hoc network, trying to concentrates on efficiency and robustness simultaneously. Certain applications-based solution for hazards is proposed, quantitative results including architecture and recovery algorithms of MFSR are also investigated in this paper.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.26-27
• /
• 2015

In the trend of globalization and location transfer of existing production bases is still characterized by an extremely unstable status between different countries and different regions. The results are negative impacts on cost, quality and speed of project implementation, especially automobile industry which is one of the most complex manufacturing sectors. In order to overcome problems from Global Standardization of Production Line and its Localization, it is highly required comprehensive coordination among design of production equipment, production technology, space and interfaces. It is necessary to set up standard of production equipment and building for parallel progress, in order to complete production line in shortest time for launching product. In addition, this standard should keep flexibility with consideration of local situation which means "Glocalization."

• Journal of Korean Institute of Industrial Engineers
• /
• v.41 no.1
• /
• pp.1-9
• /
• 2015

In shipbuling processes, a quay wall is a major resource for additional operations after an erection operation at dock. A quay wall is becoming a new bottleneck instead of docks, while ship types with long operation time at quay wall are increasing recently. We developed a quay wall scheduling algorithm for the quayside operations of ships in this paper. The objective function is to minimize the sum of not assigned days of ships which have to be assigned to any quay wall under limited numbers of quay walls. The scheduling algorithm is based on an assignment method to assign each ship to a quay wall among its alternative quay walls at the time of launching or moving to another quay wall. The scheduling algorithm is also using Tabu Search algorithm to optimize assignment sequence of ships. The experiment shows that the algorithms in this paper are effective to make schedule of the quayside operations of ships.