• 한국공간구조학회논문집
• /
• 제16권4호
• /
• pp.45-52
• /
• 2016

The single layer latticed domes have attracted many designers and researchers's attention all of the world, because these structures as spatial structure are of great advantage in not only mechanical rationality but also function, fabrication, construction and economic aspect. But single layer latticed domes are apt to occur the unstable phenomena that are called "buckling" because of the lack of strength of members, instability of structural shape, etc. In the case of latticed dome, there are several types of buckling mode such as overall buckling, local buckling, and member buckling according to the shape of dome, section type of member, the size of member, junction's condition of member and so on. There are many methods to increase the buckling strength of the single layer latticed dome, that is, with the change of geometrical shape of dome, the reinforcement of buckled member, etc. Therefore, the purpose of this study is to verify the reinforcement effect of buckled member when designers reinforce the buckled member to increase the buckling strength of single layer latticed dome with 3-way grid.

• 한국공간구조학회:학술대회논문집
• /
• 한국공간구조학회 2005년도 춘계학술발표회 및 정기총회 2권1호(통권2호)
• /
• pp.147-153
• /
• 2005

The single layer latticed dome is very sensitive on the slenderness ratio and half open angle of the elements, load condition, and the connection type because it is originazed by a lot of thin elements, so we have to use the geometrically nonlinear buckling load when the buckling of the structures is analyzed. But, it is very difficult to design the single layer latticed domes considered all conditions. Therefore the purpose of this paper is to propose the appropriate design method of the single layer latticed dome considered the geometrically nonlinear buckling load in base of the linear buckling load by the eigenvalue analysis.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.14-15
• /
• 2018

This study is to estimate the buckling characteristics of single-layer latticed dome with Span 300m according to junction's conditions of member.

• 한국공간구조학회논문집
• /
• 제3권4호
• /
• pp.69-76
• /
• 2003

In case of rectangular latticed pattern which shearing rigidity is very small, it has a concern to drop Buckling-strength considerably by external force. So, by means of system to increase buckling-strength, there is a method of construction that lattice of dome is reinforced by braced member. In a case like this, shearing rigidity of braced member increase buckling-strength of the whole of structure and can be designed economically from the viewpoint of practice. Therefore, this paper is aimed at investigating how much does rigidity of braced member united with latticed member bearing principal stress of dome increase buckling-strength of the whole of structure. the subject of study is rectangular latticed domes that are a set of 2-way lattice dome which grid is simple and number of member gathering at junction is small. Analysis method is based on FEM dealing with the geometrically nonlinear deflection problems.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1993년도 가을 학술발표회논문집
• /
• pp.74-78
• /
• 1993

Compared with rigid-jointed latticed dome, in pinned-joint latticed dome, results of Ref.1 showed reduction of buckling strength by decline of junction's rotational rigidity. Moreover, with decline of junction's rotational rigidity, geometrical initial imperfection incurs more and more reduction of buckling-strength. This study, subsequently the case of rigid-joint domes, is aimed at analyzing buckling-characteristics of pinned-joint single-layer latticed domes with triangular network subjected to initial imperfection.

• Structural Engineering and Mechanics
• /
• 제48권1호
• /
• pp.57-75
• /
• 2013

It is still inadequate for investigating the highly nonlinear and complex mechanical behaviors of single-layer latticed domes by only performing a force-based demand-capacity analysis. The energy-based balance method has been largely accepted for assessing the seismic performance of a structure in recent years. The various factors, such as span-to-rise ratio, joint rigidity and damping model, have a remarkable effect on the load-carrying capacity of a single-layer latticed dome. Therefore, it is necessary to determine the maximum load-carrying capacity of a dome under extreme loading conditions. In this paper, a mechanical model for members of the semi-rigidly jointed single-layer latticed domes, which combines fiber section model with semi-rigid connections, is proposed. The static load-carrying capacity and seismic performance on the single-layer latticed domes are evaluated by means of the mechanical model. In these analyses, different geometric parameters, joint rigidities and roof loads are discussed. The buckling behaviors of members and damage distribution of the structure are presented in detail. The sensitivity of dynamic demand parameters of the structures subjected to strong earthquakes to the damping is analyzed. The results are helpful to have a better understanding of the seismic performance of the single-layer latticed domes.

• 한국공간구조학회논문집
• /
• 제6권1호
• /
• pp.75-82
• /
• 2006

단층 래티스 돔은 작은 단면의 선 부재 조합으로 전체구조물이 구성되는 특성상 구성부재의 세장비, 부재 반개각 하중조건, 접합부 특성 등에 매우 큰 영향을 받으므로, 비선형 좌굴해석에 의한 좌굴하중을 사용해야 하지만 여러 가지 현실적 제약이나 문제점 등에 의해 이러한 것이 제대로 반영되지 않은 설계가 이루어지고 있다. 이러한 이유로 돔 구조물의 설계 시 부재의 과다 설계, 자유로운 형상 설계의 제약 등의 문제점들이 나타나는 것이 지금의 현실이다. 따라서 이 논문의 목적은 위에서 언급된 문제점을 해결하기 위하여 고유치 해석을 통한 선형 좌굴해석에 기초한 비선형 좌굴하중을 예측하고 이를 이용함으로서 보다 효과적인 설계를 가능케 하는 설계식을 제안하는 데 있다.

• 한국공간구조학회논문집
• /
• 제6권4호
• /
• pp.35-44
• /
• 2006

대공간 구조형식에는 기존의 기둥-보 구조형식에서 벗어나 쉘구조형식과 같은 형태저항 구조형식이 가장 유효한 구조형식으로 인식되고 있다. 특히 지간 $200m{\sim}300m$ 이상의 대공간구주 형식으로는 중량구조인 연속체의 쉘보다는 래티스 돔과 같은 공간 트러스형식 등의 유리하다. 시공, 제작상의 편리성, 구조미 등을 이유로 복층래티스 돔과 더불어 단층의 래티스 돔 형식도 실제 구조물에서 많이 적용되고 있다. 그러나 대공간 단층 래티스 돔의 경우 아직까지 외력의 작용으로 인한 변형과 파괴경로가 명확하게 해명되지 못한 부분이 있다. 본 연구에서는 대공간 구조형식에 적합한 래티스 돔을 대상으로 좌굴의 특성을 규명하여 안정적인 구조 설계의 기초 자료를 제시하기 위하여 실험을 수행하였다. 주된 실험변소는 격자의 간격과 돔의 지붕 강성 유무를 대상을 하였으며, 격자의 간격은 돔을 4분할, 5분할, 6분할, 7분할로 하여 정하였다. 가력은 돔의 전면에 걸쳐 구심의 등분포하중이 작용하도록 하였다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.12-19
• /
• 2005

The single layer latticed dome is very sensitive on the slenderness ratio and half open angle of the elements, load condition and the connection type because it is organized by a lot of thin elements, so we have to use the geometrically nonlinear buckling load when the buckling behavior of the structures is analyzed But, it is very difficult to design the single layer latticed domes considered all conditions. Therefore the purpose of this paper is to propose the appropriate design method of the single layer latticed dome considered the geometrically nonlinear buckling load in base on the linear buckling load by the eigen-value analysis.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1997년도 봄 학술발표회 논문집
• /
• pp.240-247
• /
• 1997

Single-layer latticed domes, which ore consisted of slender linear elements, are able to transmit external loads to the structure by in-plane forces, therefore spatial structures can be constructed with the merit of its own lightweight. But, as external load reaches to any critical level at which each member has not material nonlinearity, the single-layer latticed dome shows unstable phenomenon. In particular, pin-connected single-layer latticed domes have much complicate unstable phenomena that are combined with nodal buckling and member buckling. Furthermore, single-layer latticed domes are very sensible to the initial imperfection which occurred inevitably in construction. In this study, we are going to grasp the characteristics of instability for the latticed dome by finite element method considering geometrical nonlinearity.