• Journal of Magnetics
• /
• 제2권1호
• /
• pp.28-33
• /
• 1997

Very large in electrical resistivity by several orders of magnitude is obtained when an external magnetic field is applied to the colossal magnetoresistnace (CMR) materials such as La-Ca-Mn-O. The magnetoresistance is strongly temperature-dependent, and exhibits a sharp peak below room temperature, which can be shifted by adjusting the composition or processing parameters. The control of lattice geometry or strain, e.g., by chemical substitution, epitaxial growth or post-deposition anneal of thin films appears to be crucial in obtaining the CMR properties. The orders of magnitude change in electrical resistivity could be useful for various magnetic and electric device applications. .

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2007년도 The 1st International Symposium on Advanced Magnetic Materials
• /
• pp.220.1-220.1
• /
• 2007

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2007년도 제32회 학술대회 초록집
• /
• pp.116-116
• /
• 2007

• Structural Engineering and Mechanics
• /
• 제58권4호
• /
• pp.677-687
• /
• 2016

On the basis of the energy approach it is reported a development of the yield function and the constitutive equations for the orthotropic material with consideration of the crystal lattice constants and parameters of the crystallographic texture for the general stress state. For practical use in sheet metal forming analysis it is considered different loading scenarios: plane stress and plane strain states. Using the proposed yield function, the influence of single ideal components on the shape of yield surface was analyzed. The six texture components investigated here were cube, Goss, copper, brass, S and rotated cube, as these components are typically observed in rolled sheets from FCC alloys.

• Journal of Magnetics
• /
• 제12권1호
• /
• pp.49-52
• /
• 2007

We investigated annealing effect of microforged powders on magnetic properties and electromagnetic absorption behaviors for ferromagnetic Fe-Cr metal alloy powder-polymer composites. The coercive properties greatly decreased with annealing temperature and the magnetic permeability had significantly increased after microforging and subsequent annealing treatment, due to a reduction in lattice strain of the microforged powders. The power loss in the far field regime also had greatly increased after microforging and subsequent annealing treatment in frequency range from 50 MHz to 6 GHz. As a result, the electromagnetic absorption of ferromagnetic Fe-Cr alloy metal powder-polymer composites was highly improved because of the relaxation of the internal strain during annealing process.

• 복합신소재구조학회 논문집
• /
• 제2권3호
• /
• pp.1-11
• /
• 2011

본 연구에서는 하위 요소로(sub-element) 구성된 3차원 대칭 단위 요소들로 조합된 트러스 격자 구조물의 연속적인 물성치를 제안하였다. 개별적인 트러스 격자 물성치는 균질화 작업을 통하여 유효한 응력과 변형률 관계로 이루어진 연속적인 물성치 모델로 나타낼 수 있다. 미시적인 규모(micro scale) 스트럿의 인장이나 압축 응답에 의한 축강성은 전체 격자재료의 대부분의 강도를 차지하고, 이러한 스트럿의 부피 분율(fraction)은 효과적인 강도뿐만 아니라 복제 가능한 단위 요소로 이루어진 격자판의 상대밀도에 큰 영향을 주었다. 그러므로 균질한 강성부재로 구성된 연속적인 구성모델은 미시적인 규모로 간주되는 스트럿의 강도, 내부응력 상태 및 부피 분율과 관련된 역학적인 특성들을 포함하고 있다는 것을 확인할 수 있었다. 미시적인 규모의 응력에서 소성흐름은 균질한 구성식에서 파생된 거시적인 규모에서의 (macro-scale)응력 표면에 있는 연속적인 응력함수의 영역을 확장한다. 따라서 본 연구를 통하여 3차원 대칭 단위요소 구조물의 기본 기하학을 조사하고 압력에 의존적인 마크로 규모에서의 (macro-scale) 응력함수를 예측하는 연속적인 소성모델을 공식화하였다.

• 마이크로전자및패키징학회지
• /
• 제25권2호
• /
• pp.49-53
• /
• 2018

최근 유연 소자, 투명 소자, MEMS 소자와 같은 다양한 소자를 결합하는 시스템 집적화 기술이 많이 개발되고 있다. 이러한 다종 소자 시스템 제조 기술의 핵심 공정은 칩 또는 웨이퍼 레벨의 접합 공정, 기판 연삭 공정, 그리고 박막 기판 핸들링 기술이라 하겠다. 본 연구에서는 Si 기판 연삭 공정이 투명 박막 트랜지스터나 유연 전극 소재로 적용되는 산화주석 박막의 전기적 성질에 미치는 영향을 분석하였다. Si 기판의 두께가 얇아질수록 Si d-spacing은 감소하였고, Si 격자 내에 strain이 발생하였다. 또한, Si 기판의 두께가 얇아질수록 산화주석 박막 내 캐리어 농도가 감소하여 전기전도도가 감소하였다. 얇은 산화 주석 박막의 경우 전기전도도는 두꺼운 산화 주석 박막보다 낮았으며 Si 기판의 두께에 의해 크게 변하지 않았다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.157-157
• /
• 2010

Vertical-structure light-emitting diodes (V-LEDs) by laser lift-off (LLO) have been exploited for high-efficiency GaN-based LEDs of solid-state lightings. In V-LEDs, emitted light from active regions is reflected-up from reflective ohmic contacts on p-GaN. Therefore, silver (Ag) is very suitable for reflective contacts due to its high reflectance (>95%) and surface plasmon coupling to visible light emissions. In addition, low contact resistivity has been obtained from Ag-based ohmic contacts annealed in oxygen ambient. However, annealing in oxygen ambient causes Ag to be oxidized and/or agglomerated, leading to degradation in both electrical and optical properties. Therefore, preventing Ag from oxidation and/or agglomeration is a key aspect for high-performance V-LEDs. In this work, we demonstrate the enhanced thermal stability of Ag-based Ohmic contact to p-GaN by reducing the thermal compressive stress. The thermal compressive stress due to the large difference in CTE between GaN ($5.6{\times}10^{-6}/^{\circ}C$) and Ag ($18.9{\times}10^{-6}/^{\circ}C$) accelerate the diffusion of Ag atoms, leading to Ag agglomeration. Therefore, by increasing the additional residual tensile stress in Ag film, the thermal compressive stress could be reduced, resulting in the enhancement of Ag agglomeration resistance. We employ the thin Ni layer in Ag film to form Ni/Ag mutli-layer structure, because the lattice constant of NiO ($4.176\;{\AA}$ is larger than that of Ag ($4.086\;{\AA}$). High-resolution symmetric and asymmetric X-ray diffraction was used to measure the in-plane strain of Ag films. Due to the expansion of lattice constant by oxidation of Ni into NiO layer, Ag layer in Ni/Ag multi-layer structure was tensilely strained after annealing. Based on experimental results, it could be concluded that the reduction of thermal compressive stress by additional tensile stress in Ag film plays a critical role to enhance the thermal stability of Ag-based Ohmic contact to p-GaN.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.129-129
• /
• 2013

Nanometal alloy catalysts have been found to significantly increase catalytic efficiency, compared to the monometallic counterparts. This enhancement can be attributed to various alloying effects: i) the existence of uniquemixed-metal surface sites [the so called ensemble (geometric) effect]; ii) electronic state changes due to metal-metal interactions [the so called ligand (electronic) effect]; and iii) strain caused by lattice mismatch between the alloy components [the socalled strain effect]. In addition, the presence of low-coordination surface atoms and preferential exposure of specific facets [(111), (100), (110)] in association with the size and shape of nanoparticle catalysts [the so called shape-size-facet effect] can be another important factor for modifying the catalytic activity. However, mechanisms underlying the alloying effect still remain unclear owing to the difficulty of direct characterization. Computational approaches, particularly the prediction using first-principles density functional theory (DFT), can be a powerful and flexible alternative for unraveling the role of alloying effects in catalysis since those can give us quantitative insights into the catalytic systems. In this talk, I will present the underlying principles (such as atomic arrangement, facet, local strain, ligand interaction, and effective atomic coordination number at the surface) that govern catalytic reactions occurring on Pd-based alloys using the first-principles calculations. This work highlights the importance of knowing how to properly tailor the surface reactivity of alloy catalysts for achieving high catalytic performance.

• 한국분말재료학회지
• /
• 제19권2호
• /
• pp.134-139
• /
• 2012

P/M coppers are subjected to the isothermal compression tests at the strain rate ranging from 0.01 to 10.0 $s^{-1}$ and the temperature from 200 to $800^{\circ}C$. The processing map reveals the dynamic recrystallization (DRX) domain in the following temperature and strain rate ranges: $600-800^{\circ}C$ and 0.01-10.0 $s^{-1}$, respectively. In the domain, the region at temperature of $600^{\circ}C$ and strain rate of $10^{-2}s^{-1}$ shows peak efficiency. From the kinetic analysis, the apparent activation energy in the DRX domain is 190.67 kJ/mol and it suggests that lattice self-diffusion is the rate controlling mechanism.