• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.155-158
• /
• 2005

Precipitates, present in most commercial alloys, can have a strong influence on strength and hardening behavior of a single crystal. The effect of thin precipitates on the anisotropy of initial slip resistance and hardening behavior of crystals is modeled in this article. For the convenience of the computational derivation and implementation, the material formulation is given in the unrelated intermediate configuration mapped by the plastic part of the deformation gradient. Material descriptions for the considered two phased aggregates consisting in lattice hardening as well as isotropic hardening and kinematic hardening are suggested. Numerical simulations of various loading cases are presented to discuss and assess the performance of the suggested model.

• 열처리공학회지
• /
• 제7권2호
• /
• pp.88-95
• /
• 1994

In order to compare mechanical properties of ausformed martensite with those of marformed martemsite in Fe-30%Ni-0.1%C alloy and to investigate their strengthening mechanisms, ausformed martensite and marformed martensite were prepared by ausforming treatment and marforming treatment respectively. The microstructures were observed and the quantities of retained austenite, hardness, yield strength, ultimate tensile strength and elongation were examined. The strength of ausformed martensite was mainly increased because of the lattice defects inherited from austenite. The ductility of ausformed martensite was constant at the rate of 7-8% by ductile matrix formation of the retained austenite in spite of the increase in strength. The strength of marformed martensite was increased by the increment in dislocation density, the crossing of transformation twin with deformation twin and the mutual crossing of deformation twin. The ductility of mar formed martensite was slightly lower than that of ausformed martensite, but the strength of mar formed martensite was prominently higher.

• 열처리공학회지
• /
• 제35권5호
• /
• pp.239-245
• /
• 2022

The purpose of this study is to evaluate the degree of microstructural change of materials using ultrasonic nonlinear parameters. For microstructure change, isothermal heat-treated ferritic 2.25Cr steel and low-cycle fatigue-damage copper alloy were prepared. The variation in ultrasonic nonlinearity was analyzed and evaluated through changes in hardness, ductile-brittle transition temperature, electron microscopy, and X-ray diffraction tests. Ultrasonic nonlinearity of 2.25Cr steel increased rapidly during the first 1,000 hours of deterioration and then gradually increased thereafter. The variation in non-linear parameters was shown to be coarsening of carbides and an increase in the volume fraction of stable M6C carbides during heat treatment. Due to the low-cycle fatigue deformation of oxygen-free copper, the dislocation that causes lattice deformation developed in the material, distorting the propagating ultrasonic waves, and causing an increase in the ultrasonic nonlinear parameters.

• Nuclear Engineering and Technology
• /
• 제56권3호
• /
• pp.772-784
• /
• 2024

The hexagonal nodal code RENUS has been enhanced to handle irregularly deformed hexagonal assemblies. The underlying RENUS methods involving triangle-based polynomial expansion nodal (T-PEN) and corner point balance (CPB) were extended in a way to use line and surface integrals of polynomials in a deformed hexagonal geometry. The nodal calculation is accelerated by the coarse mesh finite difference (CMFD) formulation extended to unstructured geometry. The accuracy of the unstructured nodal solution was evaluated for a group of 2D SFR core problems in which the assembly corner points are arbitrarily displaced. The RENUS results for the change in nuclear characteristics resulting from fuel deformation were compared with those of the reference McCARD Monte Carlo code. It turned out that the two solutions agree within 18 pcm in reactivity change and 0.46% in assembly power distribution change. These results demonstrate that the proposed unstructured nodal method can accurately model heterogeneous thermal expansion in hexagonal fueled cores.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 제5회 압연심포지엄 신 시장 개척을 위한 압연기술
• /
• pp.72-82
• /
• 2004

The deformation mechanism of hexagonal close-packed materials is quite complicate including slips and twins. A deformation mechanism, which accounts for both slip and twinning, was investigated for polycrystalline hop materials. The model was developed in a finite element polycrystal model formulated with initial strain method where the stiffness matrix in FEM is based on the elastic modulus. We predicted numerically the texture of Mg alloy(AZ31B) sheet by using FEM based on crystal plasticity theory. Also, we introduced the recrystallized texture employed the maximum energy release theory after rolling. From the numerical study, it was clarified that the shrink twin could not be the main mechanism for shortening of c-axis, because the lattice rotation due to twin rejects fur c-axis to become parallel to ND(normal direction of plate). It was showed that the deformation texture with the pyramidal slip gives the ring type pole figure having hole in the center.

• 한국강구조학회 논문집
• /
• 제21권1호
• /
• pp.37-44
• /
• 2009

철선 트러스데크는 기존의 재래식 슬래브 거푸집이나 일반 데크플레이트 공법을 대체하여 철골조는 물론 철근콘크리트 구조물에도 사용이 점차 증가하고 있다. 현재 사용되고 있는 기존의 트러스 데크는 래티스 철선과 하부 철선의 비연속적인 절점간격에 의한 트러스의 비렌딜거동에 의해 완전한 트러스형상에 비해 처짐이 커지는 문제점이 있다. 본 연구는 이러한 문제점을 해결하기 위해 래티스 철선과 상하부 철선이 연속적으로 연결되어 비렌딜거동이 없는 순수 트러스형태를 구현함으로써 처짐성능이 우수한 새로운 형태의 데크를 고안하였다. 개발된 시스템의 구조적 거동을 평가하고자, 해석 및 성능평가 실험을 수행하였다. 처짐에 영향을 주는 요소를 중심으로 래티스 철선의 길이방향 연결형태, 간격을 해석과 실험의 주요 변수로 설정하였다. 해석과 실험은 실제 시공 시 타설되는 콘크리트 하중이 아연도 철판을 통해 철선에 작용하는 것을 고려하여 아연도 철판에 직접 등분포 하중을 가력하였다. 구조해석 및 실험을 통한 분석결과 철선 트러스데크의 길이방향 형태, 즉 래티스 철선의 길이방향 연결 형태가 구조적 거동에 영향을 주는 주요한 인자로서 작용했으며, 래티스 철선을 길이방향으로 연속적으로 연결함으로써 비렌딜거동에 의한 영향을 감소시킬 수 있었다. 또한 래티스 철선의 연결간격을 증가 시킬 경우에도, 상, 하부 철선에 큰 응력증가 없이 우수한 처짐 성능을 발현 할 수 있었다.

• 한국전산구조공학회논문집
• /
• 제34권5호
• /
• pp.287-292
• /
• 2021

본 논문에서는 CAD 시스템에서 사용하는 NURBS 기저함수를 사용하는 아이소-지오메트릭 해석(Isogeometric analysis) 방법과 기하학적으로 엄밀한 빔 모델링(geometrically exact beam model)을 활용하여 회전과 병진 운동이 결합된 새로운 형태의 메타물질(metamaterial)에 대한 해석을 진행하였다. 이차원 셀 구조는 자유형상변환(Free-form deformation) 법과 적절한 내삽법(Interpolation)을 통해 원통 위에 입혀졌다. 원통의 치수와 셀 개수가 비틀림 각도에 미치는 영향이 매개변수 연구(parametric study)를 통해 확인되었다. 비틀림과 병진 운동이 결합된 구조의 메커니즘에 대해 수치 예제를 통해 알아보았다.

• 한국재료학회지
• /
• 제26권10호
• /
• pp.535-541
• /
• 2016

The present study deals with the effects of micro-alloying elements such as Ni, V, and Ti on the recrystallization behavior of carbon steels at different strain rates. Eight steel specimens were fabricated by varying the chemical composition and reheating temperature; then, a high-temperature compressive deformation test was conducted in order to investigate the relationship of the microstructure and the recrystallization behavior. The specimens containing micro-alloying elements had smaller prior austenite grain sizes than those of the other specimens, presumably due to the pinning effect of the formation of carbonitrides and AlN precipitates at the austenite grain boundaries. The high-temperature compressive deformation test results indicate that dynamic recrystallization behavior was suppressed in the specimens with micro-alloying elements, particularly at increased strain rate, because of the pinning effect of precipitates, grain boundary dragging and lattice misfit effects of solute atoms, although the strength increased with increasing strain rate.

• 대한조선학회논문집
• /
• 제57권2호
• /
• pp.61-69
• /
• 2020

Due to its flexibility of the composite propeller blade, it is necessary to design a shape capable of generating a desired load at a design point in consideration of the shape change of the propeller. In order to design it, we need to evaluate not only the hydrodynamic force around it, but also its structural response of flexible propeller according to its deformation. So, it is necessary to develop a design tool to predict the hydroelastic performance of a flexible propeller with deformation considering fluid-structure interaction and special operating conditions. Finally a design optimization tool for flexible propellermade of CFRP is required. In this study, a design methodology of the specific flexible composite propeller is suggested, considering fluid-structural interaction analysis of the specific flexible propeller.

• 열처리공학회지
• /
• 제17권3호
• /
• pp.139-145
• /
• 2004

Equal channel angular pressing (ECAP) technique had been adapted to the Mg alloy (AZ31) for achieving effective grain refinement through severe deformation. The average grain size of $2.5{\mu}m$ could be obtained after 4 passes. The stability of the ECAPed structure at elevated temperatures was examined by annealing the ECAPed materials over a wide range of temperature between 473 and 748 K. The average activation energy, Q, for static grain growth of 1, 2 and 3 passes was 33.7 kJ/mole (=0.25QL, activation for lattice diffusion). The abnormally low Q value in the lower temperature range may indicate that grain growth occurs in the unrecrystallized microstructure where non-equilibrium grain boundaries containing a large number of extrinsic dislocations exist. The yield stresses of the ECAPed alloys decreased whereas the elongations increased after the ECAP process. These results should be related to the modification of texture for easier slip on basal plane.