• Journal of Periodontal and Implant Science
• /
• 제52권4호
• /
• pp.338-350
• /
• 2022

Purpose: Various studies have investigated 3-dimensional (3D)-printed implants using Ti6Al-4V powder; however, multi-root 3D-printed implants have not been fully investigated. The purpose of this study was to explore the stability of multirooted 3D-printed implants with lattice and solid structures. The secondary outcomes were comparisons between the 2 types of 3D-printed implants in micro-computed tomographic and histological analyses. Methods: Lattice- and solid-type 3D-printed implants for the left and right mandibular third premolars in beagle dogs were fabricated. Four implants in each group were placed immediately following tooth extraction. Implant stability measurement and periapical X-rays were performed every 2 weeks for 12 weeks. Peri-implant bone volume/tissue volume (BV/TV) and bone mineral density (BMD) were measured by micro-computed tomography. Bone-to-implant contact (BIC) and bone area fraction occupancy (BAFO) were measured in histomorphometric analyses. Results: All 4 lattice-type 3D-printed implants survived. Three solid-type 3D-printed implants were removed before the planned sacrifice date due to implant mobility. A slight, gradual increase in implant stability values from implant surgery to 4 weeks after surgery was observed in the lattice-type 3D-printed implants. The marginal bone change of the surviving solid-type 3D-printed implant was approximately 5 mm, whereas the value was approximately 2 mm in the lattice-type 3D-printed implants. BV/TV and BMD in the lattice type 3D-printed implants were similar to those in the surviving solid-type implant. However, BIC and BAFO were lower in the surviving solid-type 3D-printed implant than in the lattice-type 3D-printed implants. Conclusions: Within the limits of this preclinical study, 3D-printed implants of double-rooted teeth showed high primary stability. However, 3D-printed implants with interlocking structures such as lattices might provide high secondary stability and successful osseointegration.

• 한국산업융합학회 논문집
• /
• 제22권6호
• /
• pp.757-765
• /
• 2019

In manufacturing An offshore plant is a structure that produces resources buried in the seabed. It can be classified into fixed, floating, and hybrid methods depending on the installation method. In particular, the Lattice boom type crane is typically used because it is used for a long time in the sea and moves to other seas, which is less affected by wind. In this study, the crane was designed by using three-step optimization design in the early stage of the design of Lattice boom crane for offshore plant. Finite element analysis was performed to verify the safety factor, deflection, buckling coefficient and fatigue life of the designed crane and the results were verified.

• 대한수학회보
• /
• 제58권6호
• /
• pp.1445-1461
• /
• 2021

The aim of this paper is to show the local well-posedness of 2 dimensional Dirac equations with power type and Hartree type nonlin-earity derived from honeycomb structure in H^s for s > $\frac{7}{8}$ and s > $\frac{3}{8}$, respectively. We also provide the smoothness failure of flows of Dirac equations.

• Applied Microscopy
• /
• 제27권3호
• /
• pp.235-241
• /
• 1997

(001) GaAs 기판 위에 성장된 (ZnSe/FeSe) 초격자의 구성층 사이에 상호확산으로 형성된 $Zn_{1-x}Fe_xSe$ 의 미세구조가 고분해능 투과전자현미경과 컴퓨터 이미지 시뮬레이션에 의해 연구되었다. 컴퓨터 이미지 시뮬레이션은 multislice 방법으로 여러 시편 두께와 초점 거리에서 실시되었다. 컴퓨터 시뮬레이션에 의해 얻은 이미지는 실험에 의해 얻은 이미지와 비교되었다. 또한, CuAu-I 형태 규칙화가 $Zn_{1-x}Fe_xSe$ 상호화산층에서 일어났다. 이 CuAu-I 형태 규칙격자는 <100>과 <110> 방향에 따라서 ZnSe와 FeSe 층이 교대로 구성되어 있다.

• 한국전산구조공학회논문집
• /
• 제28권1호
• /
• pp.53-61
• /
• 2015

본 논문에서는 대공간구조에 폭넓게 사용되는 단층 래티스돔의 비선형거동에 관한 비교 연구를 수행하였다. 단층 래티스돔은 특성상 두께가 얇은 쉘구조의 거동과 유사하므로 전통적인 쉘좌굴 이론을 적용하여 내력을 산출할 수 있으며 또한 이 결과를 유한요소해석 프로그램을 이용한 수치해석의 결과와 비교, 분석하였다. 쉘좌굴 이론을 이용하여서는 래티스 돔의 전체좌굴하중과 부재좌굴하중을 산정하였으며, 유한요소해석법을 이용하여서는 고유치 해석에 의한 좌굴하중과 기하학적 비선형 해석에 의한 극한하중을 각각 산정하였다. 래티스돔의 절점은 강절점 및 핀절점으로 각각 모델링하였다. 쉘좌굴이론에 의한 좌굴내력은 전체좌굴하중과 부재좌굴하중의 작은 값으로 결정되며 이 값은 유한요소해석을 이용한 고유치 해석보다는 비선형 해석에 의한 극한하중에 보다 근사한 값을 제공하였으며 또한 좌굴하중의 형식을 예측하는데에 유용하게 활용되었다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2004년도 Asia Navigation Conference
• /
• pp.226-234
• /
• 2004

In this study experiments are conducted with a mid-layer type structure. This structure can operate not only at water surface but also in water. Six degrees of freedom oscillations of the structure and mooring force were measured by model experiments. From these experiments, it was shown that the lattice model has two peaks in the surge response curve and the oscillation amplitude and mooring forces increase according to the distance of separation between water level and upper deck.

• 전기학회논문지
• /
• 제59권11호
• /
• pp.2108-2113
• /
• 2010

The Long Term Evolution (LTE) system is based on the Orthogonal Frequency Division Multiplexing (OFDM) and relies its channel estimation on the lattice-type pilot samples in the multipath fading channel environment. The estimation of the channel frequency response (CFR) makes use of the least squares estimate (LSE) for each pilot samples, followed by an interpolation both in time- and in frequency-domain to fill up the channel estimates for subcarriers corresponding to data samples. Any interpolation scheme could be adopted for this purpose. Depending on the requirements of the target system, we may choose a simple linear interpolation or a sophisticated one. For any choice of an interpolation scheme, these is a trade-off between estimation accuracy and numerical cost. For those wireless communication systems based on the OFDM and the preamble-type pilot structure, the DFT-based channel estimation and its variants have been successfully. Yet, it may not be suitable for the lattice-type pilot structure, since the pilot samples are not sufficient to provide an accurate estimate and it is known to be sensitive to the location as well as the length of the time-domain window. In this paper, we propose a simple interpolated based on the upsampling mechanism in the multirate signal processing. The proposed method provides an excellent alternative to the DFT-based methods in terms of numerical cost and accuracy. The performance of the proposed technique is verified on a multipath environment suggested on a 3GPP LTE specification.

• 한국세라믹학회지
• /
• 제34권7호
• /
• pp.713-721
• /
• 1997

Molecular dynamic (MD) simulations with new interatomic potential function including the covalent bond were performed on the phase transition of $\alpha$-quartz-type GeO2 under high pressure. The optimized crystal structure and the pressure dependence of the lattice constant showed higher reproducibility than the previous models and were in very good agreement with the experimental data. A phase transition of $\alpha$-quartz and $\alpha$-quartz-type GeO2 by simulation was found approximately 24 GPa and 6-7 GPa, respectively. This phase transition involved an abrupt volume shrinkage and showed 4-6 coordination mixed structure with the increasing in the coordination number of cation.

• 한국세라믹학회지
• /
• 제15권2호
• /
• pp.59-65
• /
• 1978

Some compounds with tetrahedral framework structures are synthetized and the general methods of synthesis are discussed. There exist tridymite-, cristobalite-, Icmm-, Immm-, beryllonite-, feldspar-, and paracelsian-structure type in the gropu of compounds. Their lattice constants and space groups are summarized and given in a table.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.447-448
• /
• 2010