• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.30 no.1
• /
• pp.51-60
• /
• 2024

Background: Ankle sprains are a common clinical ankle disorder and alternations in tibiofibular joint biomechanics along with the talus are thought to contribute to its occurrence. During ankle joint dorsi flexion, proper movement requires the talus to glide posteriorly. Due to the wider front of the talus head, achieving the end range of dorsi flexion necessitates both superior and posterior glide of the distal fibula and anterior glide of the proximal fibula. The purpose of this study was to investigate the effects of tibiofibular joint mobilization on pain, range of motion, and balance in patients with lateral ankle sprains. Methods: Participants were randomly assigned to a control group (n=33) or an experimental group (n=31). Both groups underwent ankle joint mobilization three times a week for two weeks. Additionally, the experimental group received proximal and distal tibiofibular joint mobilization three times a week for two weeks. Measurements were obtained pre-intervention and post-intervention (after 2 weeks). Results: Evaluation parameters included the visual analog scale score (VAS), range of motion (ROM), and one-leg standing test (OLS). Post-intervention, both groups demonstrated significantly improved results for all assessments (p<.01). A significant intergroup difference was observed only in the ROM (p<.01) and OLS (p<.05). Conclusion: Our findings suggest that tibiofibular joint mobilization, combined with ankle joint mobilization, may be beneficial in enhancing outcomes for individuals with lateral ankle sprains.

• Plant Resources
• /
• v.6 no.2
• /
• pp.120-128
• /
• 2003

The objectives of this study, an analysis of the variation for leaf and fruit characteristics among the selected ten populations of Sorbus commixta Hedl. could be used for the conservation of gene resources and could provide information to superior trees selection. The results obtained from this study can be summarized as follows; Approximately, the Mt. Sungin population at Ulleung island showed larger values in overall characteristics and populations. On the other hand, Mt. Halla population at Jeju island showed the smaller values of the overall characteristics and populations. ANOV A tests showed that there were statistically significant differences in all leaf characteristics among the populations as well as individual trees within populations. But, for fruit characteristics, differences were statistically significant only among the populations. Cluster analysis using single linkage method based on leaf and fruit characteristics showed that ten selected populations of S. commixta in Korea could be clustered into three groups. Group I is Mt. Sungin at Ulleung island, Group II is Mt. Halla at Jeju island, and Group III comprises Osan, Mt. Kaji, Mt. Duckyoo, Mt. Balwang, Mt. Sobaek, Mt. O-dae, Mt. Jiri, and Mt. Taebaek. The selection level based on major agronomic traits, which are the Number of Fruit per Fruiting Lateral(NFL) over 50, and Fruit Length(FL) and Width(FW) over 10 mm, and Weight of 100 Fruit(WFI00) over 66 g, was applied on 100 sample trees, and five trees were selected. The selection effects from selected trees in NFL, FL, FW, and WF100 were evaluated as 132%, 151 %, 142%, and 264% compared to the mean of those 100 sample trees, respectively. Especially, Ulleung 2 showed excellent values that NFL and WFI00 were 95, and 69 g, respectively, suggesting a promising new cultivar for larger fruit and high productivity.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.518-521
• /
• 2005

We performed the mechanical test for obtaining properties of femoral head. Tested sample was male and 35 years old. We measured bone mineral density by dual X-ray absorption method(DEXA). Results of DEXA, he has normal condition of bone density. His BMD $1.159g/cm^2$ and T-Score is 1.6. Tested femurs were harvested by surgical method from donated cadaver. We made 9 specimens in femoral head, 8 specimens in neck used by diamond core drill. Then we performed compressive test in saline solution at $38^{\circ}C$. We obtained results that elastic modulus of femoral head was 0.439GPa, neck was 0.459GPa. Compressive strength of femoral head was 7.441 MPa, neck was 7.095MPa. There was no significant difference of mechanical properties between left and right femoral head & neck. Invested local properties of femoral head have more strength superior and anterior side, femoral neck has more strength in superior and inferior side but other side except for superior has more weakness along the lateral side.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.2
• /
• pp.113-120
• /
• 2005

An understanding of soil-structure interaction is the key to rational and economical design for laterally loaded drilled shafts. It is very difficult to formulate the ultimate lateral capacity into a general equation because of the inherent soil nonlincarity, nonhomogeneity, and complexity enhanced by the three dimensional and asymmetric nature of the problem though extensive research works on the behavior of deep foundations subjected to lateral loads have been conducted for several decades. This study reviews the four most well known methods (i.e., Reese, Broms, Hansen, and Davidson) among many design methods according to the specific site conditions, the drilled shaft geometric characteristics (D/B ratios), and the loading conditions. And the hyperbolic lateral capacities (H$_h$) interpreted by the hyperbolic transformation of the load-displacement curves obtained from model tests carried out as a part of this research have been compared with the ultimate lateral capacities (Hu) predicted by the four methods. The H$_u$ / H$_h$ ratios from Reese's and Hansen's methods are 0.966 and 1.015, respectively, which shows both the two methods yield results very close to the test results. Whereas the H$_u$ predicted by Davidson's method is larger than H$_h$ by about $30\%$, the C.0.V. of the predicted lateral capacities by Davidson is the smallest among the four. Broms' method, the simplest among the few methods, gives H$_u$ / H$_h$ : 0.896, which estimates the ultimate lateral capacity smaller than the others because some other resisting sources against lateral loading are neglected in this method. But it results in one of the most reliable methods with the smallest S.D. in predicting the ultimate lateral capacity. Conclusively, none of the four can be superior to the others in a sense of the accuracy of predicting the ultimate lateral capacity. Also, regardless of how sophisticated or complicated the calculating procedures are, the reliability in the lateral capacity predictions seems to be a different issue.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.41
• /
• pp.57.1-57.8
• /
• 2019

Background: The relationship between the lateral deviation of chin and the upper and middle facial third asymmetry is still controversial. The purpose of this study is to evaluate the correlation of upper and middle facial third asymmetry with lateral deviation of chin using 3-dimensional computed tomography. The study was conducted on patients who underwent orthognathic surgery from January 2016 to August 2017. A total of 40 patients were included in this retrospective study. A spiral scanner was used to obtain the 3-dimensional computed tomography scans. The landmarks were assigned on the reconstructed 3-dimensional images, and their locations were verified on the axial, midsagittal, and coronal slices. The Pearson correlation analysis was performed to evaluate the correlation between chin deviation and difference between the measurements of distances in paired craniofacial structures. Statistical analysis was performed at a significance level of 5%. Results: In mandible, the degree of chin deviation was correlated with the mandibular length and mandibular body length. Mandibular length and mandibular body length are shorter on the deviated-chin side compared to that on the non-deviated side (mandibular length, r = -0.897, p value < 0.001; mandibular body length, r = -0.318, p value = 0.045). In the upper and middle facial thirds, the degree of chin deviation was correlated with the vertical asymmetry of the glenoid fossa and zygonion. Glenoid fossa and zygonion are superior on the deviated-chin side than on the non-deviated side (glenoid fossa, r = 0.317, p value = 0.046; zygonion, r = 0.357, p value = 0.024). Conclusion: Lateral deviation of chin is correlated with upper and middle facial third asymmetry as well as lower facial third asymmetry. As a result, treatment planning in patients with chin deviation should involve a careful evaluation of the asymmetry of the upper and middle facial thirds to ensure complete patient satisfaction.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.25 no.4
• /
• pp.324-329
• /
• 1999

The facial esthetics are much affected by nasal changes due to especially its central position in relation to facial outline and so appropriately evaluated should be the functional and esthetic aspects of the nose associated with the facial appearance. Generally, a maxillary surgical movement is known to induce the changes of nasolabial morphology secondary to the skeletal repositioning accompanied by muscular retraction. These changes can be desirable or undesirable to individuals according to the direction and amount of maxillary repositioning. We investigated the surgical changes of bony maxilla and its effects to nasal morphology through the analysis of the lateral cephalogram in the Le Fort I osteotomy. Subjects were 10 patients(male 2, female 8, mean age 22.3 years) and cephalograms were obtained 2 weeks before surgery(T1) and 6 months after surgery(T2). The surgical maxillary movement was identified through the horizontal and vertical repositioning of point A. Soft-tissue analysis of the nasal profile was performed employing two angles: nasal tip projection(NTP), columellar angle(CA). Also, alar base width(ABW) was assessed directly on the patients with a slide gauge. The results were as follows; 1. Both anterior and superior movement above 2mm of maxilla rotated up nasal tip above 1mm. Either anterior or superior movement above 2mm of maxilla made prediction of the amount & direction of NTP changes difficult. Especially, a correlation between horizontal movement of maxilla and NTP rotated-up was P<0.01. 2. Both much highly anterior and superior movement of maxilla is accompanied by more CA increase than either highly. Especially, the correlation between horizontal movement of maxilla and CA change was P<0.05. 3. Anterior and/or superior movement of maxilla was accompanied by the unpredictable ABW widening. 4. The amount of changes of NTP, CA, and ABW is not in direct proportion to amout of anterior and/or superior movement of maxilla. 5. Nasal morphologic changes following Le Fort I osteotomy are affacted by not merely bony repositioning but other multiple factors.

• Journal of Life Science
• /
• v.20 no.1
• /
• pp.1-8
• /
• 2010

We recently reported the distributions of AMPA ($\alpha$-amino-3-hydroxyl-5-methyl-4-isoxazole-propionate) receptor subtypes glutamate receptors (GluR) 1 and GluR4 in the superior colliculi (SC) of hamsters with antibody immunocytochemistry and the effect of enucleation on these distributions. We also compared these labelings to those of calcium-binding proteins calbindin D28K, calretinin, parvalbumin, and GABA. In the present study, we investigated whether the GluR1- and GluR4-immunoreactive (IR) neurons are interneurons or projection neurons by injection of the retrograde tracer horseradish peroxidase (HRP) into one of each major ascending and descending pathways of the SC. HRP injections were made into a tecto-reticulospinal pathway (TRS) and dorsal lateral geniculate nucleus (dLGN). Animals were then allowed to recover and to survive for 48 hr before perfusion. Sections containing retrograde-labeled neurons were then treated for GluR-immunoreactivity. HRP injections proved that only a small population of the GluR1-IR cells project into TRS (1.4%) and dLGN (2.6%). However, a large subpopulation of GluR4-IR cells project into TRS (32.7%). The differential compositions of inter/projection neurons, along with our previous studies on the separate distribution of the GluR subunits, its differential co-localization with calcium-binding proteins and GABA, and differential reactions to enucleations, strongly imply the functional variety of the receptor subunits in visual behavior responses.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.10a
• /
• pp.605-610
• /
• 2002

The purpose of this study is to develop an analytic model which can describe the behavior or concrete compressive member strengthened by CFS(Carbon Fiber Sheet) with various cross-sectional shapes such as circular. square, and octagonal and various laminate angles. The failure criterion of laminated CFS is based on Tsai-Wu failure criterion. The stress strain model of confined concrete compressive member is based on an equation proposed by Mander. The effective lateral confining pressure is considered and modified according to various cross-sectional shapes. Octagonal cross-section shows the best results in the aspect of ductility, while circular does in compressive strengthening effects. In addition, [0/0/0/0] laminate in which the direction of fiber is parallel to the direction of principal stress shows the superior strength and ductility than other laminates. The analytic results show that strength and ductility of the analytic model depend on the cross-sectional shapes as well as the laminate angles.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.315-318
• /
• 2004

We developed a vapor induced crystallization (VIC) process for the first time to obtain high quality polycrystalline Si films by sublimating the mixture of $AlCl_3$ and $NiCl_2$. The VIC process enhanced the crystallization of amorphous silicon thin films. The LPCVD amorphous silicon thin films were completely crystallized after 5 hours at 480 $^{\circ}C$. It is known that needle-like grains with very small width grow in the Ni-metal induced lateral crystallization. In our new method, the width of grains is larger because the grain can also grow perpendicular to the needle growth direction. Also the interface between the merging grain boundaries was coherent. As the results, a polycrystalline film with superior microstructure has been obtained.

• Journal of Korean Neurosurgical Society
• /
• v.38 no.5
• /
• pp.399-402
• /
• 2005

Direct anterior approach for lesions located anterior to the thecal sac is definitely superior to lateral or posterior approach in many respects. However, various anatomical obstacles and technical difficulties often hinder direct anterior approach. Thanks to ripe experience of retroperitoneal approach to the lumbar spine for anterior lumbar interbody fusion and total disc replacement, the authors could perform lumbar corpectomy and reconstruction by using midline retroperitoneal approach recently. During this approach, we repaired anterior longitudinal ligament also to reduce the risk of graft extrusion and to prevent erosion of vascular wall due to direct contact between metallic hardware, which was used for reconstruction of vertebral body, and major vessels.