• Journal of Korean Dental Science
• /
• v.3 no.2
• /
• pp.40-49
• /
• 2010

Dental clinicians often encounter cases wherein the patient's lost molar area was neglected and left untreated for an extended period of time, thereby causing the extrusion of opposite molars and occlusal disharmony as well as occlusion in the anterior teeth and consequently resulting in anterior displacement in the area. Clinicians normally carry out prosthetic treatment via occlusal plane lifting when such becomes absolutely necessary due to the lack of sufficient space needed for prosthetic therapy aimed at proper anterior and lateral induction. In this case report, we examined occlusal disharmony and VDO loss in a patient who had lost his molars and had not received prosthetic treatment for an extended period of time. We treated the maxillary area with dental implant prosthetics and Kennedy Class I RPD and the mandibular area with residual natural tooth-based implant placement and dental implant prosthetics. The patient reported treatment outcomes that were deemed satisfactory both functionally and aesthetically.

• Structural Engineering and Mechanics
• /
• v.28 no.3
• /
• pp.295-316
• /
• 2008

In the present paper a mechanical model to predict the compressive response of high strength short concrete columns with square cross-section confined by transverse steel is presented. The model allows one to estimate the equivalent confinement pressures exercised by transverse steel during the loading process taking into account of the interaction of the stirrups with the inner core both in the plane of the stirrups and in the space between two successive stirrups. The lateral pressure distributions at hoop levels are obtained by using a simple model of elastic beam on elastic medium simulating the interaction between stirrups and concrete core, including yielding of steel stirrups and damage of concrete core by means of the variation in the elastic modulus and in the Poisson's coefficient. Complete stress-strain curves in compression of confined concrete core are obtained considering the variation of the axial forces in the leg of the stirrup during the loading process. The model was compared with some others presented in the literature and it was validated on the basis of the existing experimental data. Finally, it was shown that the model allows one to include the main parameters governing the confinement problems of high strength concrete members such as: - the strength of plain concrete and its brittleness; - the diameter, the pitch and the yielding stress of the stirrups; - the diameter and the yielding stress of longitudinal bars; - the side of the member, etc.

• Journal of Plant Biology
• /
• v.30 no.4
• /
• pp.225-247
• /
• 1987

Meiosis and postmeiotic mitosis in Boletus rubinellus were examined ultrastructurally. Meriosis occurred at the apex of the basidium. A sausage-shaped spindle pole body(SPB) was observed along with the presence of synaptonemal complexes during pachytene and a diglobular SPB was present on late pachytene or diplotene nuclei. During metaphase I, the monoglobular SPB at the spindle pole was surrounded bya membrane and the nuclear enveloope was discontinuous. At anaphase I, the chromosomes became better defined and formed a central spindle. The nucleolus was extruded from the nucleus. During anaphase I, the SPB was excluded from the chromosomal region by a membrane and both poles were fully separated to opposite sides of the basidial wall. In meiosis II, the two nuclei divided synchronously and the spindles were parallel. The spindles were smaller than in meiosis I, while the SPB was approximately the same size as that of the similar stage in meiosis I. During anaphasetelophase II, the SPB was surrounded by a cap of endoplasmic reticulum (ER) that delimited it from the spindle. The postmeiotic interphase nuclei migrated to the mid-region of the basidium before migration to the spores. The SPB at this stage was diglobular. A postmeiotic mitosis occurred within the basidiospore, and the plane of the spindle was obique to the long axis of the spore. The spindle and SPB were smaller than at meiosis I and there were fewer nonchromosomal microtubules. At anaphase, the nucleolus was present inside the nuclear envelope but lateral to the spindle.

• Journal of Oral Medicine and Pain
• /
• v.7 no.1
• /
• pp.86-94
• /
• 1982

Maximal active movements of the mandible in the vertical and the horizontal plane were measured in 147 boys and 155 girls. with an age of 13, 15, 17 years respectively. The studied persons had no pain or severe symptoms of dysfunction of the masticatory system and the method used in this paper was devised by Agerberg, and the numerical calculations were performed at the Dept. of Medical Engineering of Seoul National University Hospital. The obtained results were as follows : 1. The mean values of maximal opening in 13 year-old boys and girls were 58.5 mm,58.9 mm respectively, and the mean values of boys were increased with age. 2. The mean values of maximal lateral movement to the right in 13-year-old boys and girls were 9.1 mm, 8.3 mm respectively, and the mean values to the left were 9.3 mm, 8.7 mm resprctively. The mean values were not increased with age in both. 3. The mean values of maximal protrusion in 13-year-old boys and girls were 8.7 mm, 8.1 mm respectivly, and in all ages the mean values of boys were larger than those of girls. 4. The range of maximal mandibular movements in teen-agers with 95% probability prediction ellipses were presented.

• Computational Structural Engineering
• /
• v.10 no.2
• /
• pp.161-169
• /
• 1997

It is known that tire plays an important role to the dynamic performances of a vehicle such as noise, vibration, ride and handling. Therefore, force and moment measurements have been a part of the traditional tire engineering process. In this paper, a computational analysis technique has been explored. A FE model is made to simulate inflation, vertical load due to the vehicle weight, and the slow rolling of a radial tire. A rigid surface with Coulomb friction is included in the model to simulate the slow rolling contact. The tire slip during the in-plane motion of the rigid surface is calculated. Results are presented for both lateral and vertical loads, as well as straight ahead free rolling. The calculated and measured tire slips are in good correlation. A Study on slow Rolling Tire for perdiction of tire Forces and Moments.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.6
• /
• pp.782-786
• /
• 2010

Thrust deduction related to the prediction of power performance of a ship is rather resistance increase, and as a preliminary study for it forces upon a circular cylinder in a uniform flow of ideal fluid due to singularities located behind it are investigated. The circle theorem is used to get the complex velocity potential for the flow field under consideration, and the Blasius theorem is applied to obtain forces upon the circular cylinder. As singularities sinks, point vortices and dipoles and their combinations are treated. $\varepsilon$, standing for the strength of a singularity, and $\delta$, representing the distance between the cylinder and the singularity, are important small parameters for the resistance and lateral forces. For sinks or point vortices it is shown that the dimensionless forces upon the cylinder is O($\epsilon$) if $\epsilon$= O($\delta$) is assumed, and the same holds for dipoles if $\epsilon$= O(${\delta}^3$) is supposed. Forces upon the cylinder by a symmetric pair of sinks are greater than a single sink located at the central plane since there is an additional term due to cross effects, and the same is also valid for the case of dipole. Combination of dipole and a point vortex is also considered and a few new aspects are clarified.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.5
• /
• pp.161-168
• /
• 2010

Practicing engineers and researchers need computational tools that estimate accurately the cyclic response of RC walls, and in particular, force and deformation capacities and their materials strains. So this paper describes a nonlinear truss modeling approach for reinforced concrete walls, or in general, for plane stress reinforced concrete elements subjected to cyclic reversals. Nonlinear vertical, horizontal, and diagonal truss elements are used to represent concrete and steel reinforcement. The wall having aspect ratio of 1.2 was chosen to be compared with the experimental results. Here, four types of main diagonal member models and three types of diagonal members models were applied to find out more accurate results of analysis.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.641-644
• /
• 2005

This study reveals some recent attempt in modeling empirically obtained B&K HATS (Head and Torso Simulator) HRTFs (Head Related Transfer Functions) to Isolate parameters that stimulate lateral and elevation perception. Localization using non-individual HRTFs often yields poor performance in synthesizing virtual sound sources when applied to a group of individuals due to differences in size and shape of head, pinnae, and torso. For realization of both effective and efficient virtual audio it is necessary to develop a method to tailor a given set of non-individual HRTFs to fit each listener without measuring his/her HRTF set. Pole-zero modeling is applied to fit HRIRs (Head Related Impulse Responses) and modeling criterions for determining suitable number of parameters are suggested for efficient modeling. Horizontal HRTFs are modeled as minimum-phase transfer functions with appropriate ITDs (Interaural Time Delay) obtained from RTF (Ray Tracing Formula) to better fit the size of listener's head for usage in simple virtualizer algorithms without complex regularization processes. Result of modeling HRTFs in the median plane is shown and parameters responsible for elevation perception are isolated which can be referred to in the future study of developing customizable HRTFs.

• Journal of Acupuncture Research
• /
• v.36 no.4
• /
• pp.282-285
• /
• 2019

Scoliosis is a 3-dimensional spinal deformity defined as lateral curvature of the spine in the coronal plane of more than $10^{\circ}$. This study describes a case of functional scoliosis after hip injury. In this case, the patient fell whilst inline skating (June 2015) causing severe tilting of her spine, and left hip pain. She received outpatient treatment from July 14, 2015 to December 28, 2015. For approximately 5 months, acupuncture therapy was performed to relax the tension in both hips, Chuna therapy, and foot orthosis were applied to reduce the body's imbalance. Based on X-ray images, the Cobb angle had decreased from $14.73^{\circ}$ (pretreatment) to $1.90^{\circ}$ (posttreatment). This case report suggested that Korean medicine treatment could be an effective therapeutic choice for functional scoliosis.

• Journal of Yeungnam Medical Science
• /
• v.36 no.2
• /
• pp.92-98
• /
• 2019

Forefoot disorders are often seen in clinical practice. Forefoot deformity and pain can deteriorate gait function and decrease quality of life. This review presents common forefoot disorders and conservative treatment using an insole or orthosis. Metatarsalgia is a painful foot condition affecting the metatarsal (MT) region of the foot. A MT pad, MT bar, or forefoot cushion can be used to alleviate MT pain. Hallux valgus is a deformity characterized by medial deviation of the first MT and lateral deviation of the hallux. A toe spreader, valgus splint, and bunion shield are commonly applied to patients with hallux valgus. Hallux limitus and hallux rigidus refer to painful limitations of dorsiflexion of the first metatarsophalangeal joint. A kinetic wedge foot orthosis or rocker sole can help relieve symptoms from hallux limitus or rigidus. Hammer, claw, and mallet toes are sagittal plane deformities of the lesser toes. Toe sleeve or padding can be applied over high-pressure areas in the proximal or distal interphalangeal joints or under the MT heads. An MT off-loading insole can also be used to alleviate symptoms following lesser toe deformities. Morton's neuroma is a benign neuroma of an intermetatarsal plantar nerve that leads to a painful condition affecting the MT area. The MT bar, the plantar pad, or a more cushioned insole would be useful. In addition, patients with any of the above various forefoot disorders should avoid tight-fitting or high-heeled shoes. Applying an insole or orthosis and wearing proper shoes can be beneficial for managing forefoot disorders.