• 대한기계학회논문집A
• /
• 제26권2호
• /
• pp.340-348
• /
• 2002

Deformation analysis of injection molded articles whose geometry is considered as the assembly of thin flat plates has been conducted. For the in-mold analysis, thermo-viscoelastic stress calculation of thermo-rheologically simple amorphous polymer and in-mold deformation calculation considering the in-plane mold constraint have been done. Free volume theory has been used to represent the non-equilibrium density state during the fast cooling. At ejection, instantaneous deformation takes place due to the redistribution of in-mold residual stress. During out-of-mold cooling after ejection, thermoelastic model based on the effective temperature has been adopted for the calculation of out-of-mold deformation. In this study, emphasis is also made on the treatment with regard to lateral constraint types during molding process. Two typical mold geometries are used to test the numerical simulation modeling developed in this study.

• Earthquakes and Structures
• /
• 제12권1호
• /
• pp.23-34
• /
• 2017

Composite steel plate deep beam (CDB) is proposed as a lateral resisting member, which is constructed by steel plate and reinforced concrete (RC) panel, and it is connected with building frame through high-strength bolts. To investigate the seismic performance of the CDB, tests of two 1/3 scaled specimens with different length-to-height ratio were carried out under cyclic loads. The failure modes, load-carrying capacity, hysteretic behavior, ductility and energy dissipation were obtained and analyzed. In addition, the nonlinear finite element (FE) models of the specimens were established and verified by the test results. Besides, parametric analyses were performed to study the effect of length-to-height ratio, height-to-thickness ratio, material type and arrangement of RC panel. The experimental and numerical results showed that: the CDBs lost their load-carrying capacity because of the large out-of plane deformation and yield of the tension field formed on the steel plate. By increasing the length-to-height ratio of steel plate, the load-carrying capacity, elastic stiffness, ductility and energy dissipation capacity of the specimens were significantly enhanced. The ultimate loading capacity increased with increasing the length-to-height ratio of steel plate and yield strength of steel plate; and such capacity increased with decreasing of height-to-thickness ratio of steel plate and gap. Finally, a unified formula is proposed to calculate their ultimate loading capacity, and fitting formula on such indexes are provided for designation of the CDB.

• 대한조선학회논문집
• /
• 제42권1호
• /
• pp.50-56
• /
• 2005

The performance of Traditional Korean Fishing Boat is surveyed based on Report on Investigation of Korean Fishing Boat. The characteristics of Traditional Korean fishing Boat of hull form, rudder, sail are studied from the view point of modern sailing boat design. As a result we find her hull form is an excellent candidate of mother ship for modern boat design and the great sized rudder of Traditional Korean Fishing Boat makes a role of the centerboard of modern sailing host. And also we find the sail of Traditional Korean fishing Boat is more useful for sailing against the wind direction than an ordinary Lug sail.

• 대한치과교정학회지
• /
• 제16권1호
• /
• pp.167-177
• /
• 1986

This study was undertaken to compare the main differences and its effects of the 4 first bicuspid extraction on the face and dental arch of the class II div 1 malocclusion. The subjects consisted of twenty two class II div 1 malocclusion, four males, eighteen females, were 14 Years 2 Months old at the stan of the treatment 16 Year 3 Months old at the end of the treatment. (mean age) Twenty one variables were observed by comparing the statistical data of the pretreatment records with postteratment records, which were consited of eight varibles on the study model digitation, thirteen variables on the tracing of the lateral cephalogram. The following results were obtained. 1. No significant change was observed in the intercanine width. 2. Intercuspal widths of the 1st. premolar and 2nd. premolar were decreased. 3. Change of the overjet was dependant upon upper anterior rather than lower anterior. 4. No significant changes were observed in facial plane angle and ANB angle. 5. Uprighting of the lower 1st. molar had an effect on the increase of the facial height.

• 대한치과교정학회지
• /
• 제19권2호
• /
• pp.95-108
• /
• 1989

This study intended to calculate the cephalometric norms of Korean adult and to compare those with norms of the North American Caucasian by Moyers. Cephalometric headplates of 41 males and 31 females ranged in age from eighteen to twenty-six with normal occlusion and pleasing face were employed for this investigation. The tracings of the standard lateral cephalograms were analyzed by Moyers' method. As a result of this study, the following conclusion can be made. 1. Norms of Korean adult male and female were calculated. 2. There was no significant sexual difference in the basic craniofacial morphology. 3. The size of craniofacial skeleton was larger in male than in female. 4. The Korean male showed lower value of mandibular plane angle to craial base than that of the Caucasian male. 5. There was no significant difference in the anterior total facial height, however, in the posterior facial height the Korean male was larger than the Caucasian male, which manifested that the Korean male held more square-shaped profile. 6. The anteroposterior length of anterior and posterior cranial base, maxillary and mandibular skeletal and dentoalveolar effective length of the Korean male were shorter than those of the Caucasian male, and this suggested that the craniofacial profile depth of the Korean male was shorter than that of the Caucasian male.

• 대한치과교정학회지
• /
• 제17권1호
• /
• pp.23-32
• /
• 1987

There are variations in regional cranial and facial balance as a normal developmental process and regional imbalances often tend to compensate each other to provide functional equilibrium. This study was designed to analyse the patterns of morphologic harmony and inharmony inherent in normal occlusion and malocclusion. The subjects consisted of 92 individuals with normal occlusion and 60 Class III malocclusion patients. Their lateral cephalograms were traced and analysed using the counterpart analysis described by Enlow. The normal occlusion group was divided into Normal Types A and B according to the relative positions of Points A and B. The following conclusions were reached: 1 The normal occlusion consisted of $28.3\%$ of Normal Type A and $69.6\%$ of Normal Type B. 2. The Normal Type A and B differed from each other in the morphology of the cranial base, the mandibular ramus and corpus, and the functional occlusal plane. The Normal Type B showed considerable mandibular protrusion effect in the effective dimension and alignment of the above factors. 3. Most normal individuals showed some degree of disharmony among morphologic factors but the deviations were relatively small. 4. The Normal Type B was less balanced than the Normal Type A. 5. More regional imbalances were involved in Class III malocclusion and the imbalances were more severe.

• 대한치과교정학회지
• /
• 제42권2호
• /
• pp.64-72
• /
• 2012

Objective: The aims of this study were to examine whether a passive stretch stimulus by means of a functional appliance induces changes in the fiber composition of masticatory muscles and whether these changes are similar to the changes in stretched limb muscle fibers by using RT-PCR, western blot, and immunohistochemical assays. Methods: Five male New Zealand White rabbits were fitted with a prefabricated inclined plane on the maxillary central incisors to force the mandible forward (- 2 mm) and downward (- 4 mm). Further, 1 hind limb was extended and constrained with a cast so that the extensor digitorum longus (EDL) was stretched when the animal used the limb. The animals were sacrificed aft er 1 week and the masseter, lateral pterygoid, and EDL were processed and compared with those from control animals (n = 3). Results: The stretched EDL had a significantly higher percentage of slow fibers, whereas the stretched masticatory muscles did not show changes in the composition of the major contractile proteins aft er 7 days. Conclusions: The transition of fiber phenotypes in response to a stretch stimulus may take longer in the masticatory muscles than in the limb muscles.

• Journal of Magnetics
• /
• 제11권4호
• /
• pp.182-188
• /
• 2006

The search for high-density recording materials has been one of most active and vigorous field in the field of magnetism. $FePt-L1_{0}$ nanoparticle has emerged as a potential candidate because of its high anisotropy. In this paper, we provide an overview of recent work at Argonne National Laboratory that contributes to the ongoing dialogue concerning the relation between structure and properties of the FePt nanoparticle system. In particular we discuss the ability to control structure and properties via dosing with Cr. Cr-dosed FePt films were grown via molecular beam epitaxy and annealed at $550^{\circ}C$ in an ultrahigh vacuum chamber, and were studied with the surface magneto-optic Kerr effect (SMOKE), scanning electron microscopy (SEM) and x-ray magnetic circular dichroism (XMCD). We found that small dosage of Cr helps to generate $L1_{0}$ phase FePt magnetic nanoparticles with small size, defined shape and regular spatial distribution on MgO (001) substrate. The nanostructures are ferromagnetic with high magnetic coercivity (${\sim}0.9T$) and magnetic easy axis in the desired out-of-plane orientation. We also show that controlling the lateral region where nanostructures exist is possible via artificial patterning with Cr.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제27권1호
• /
• pp.48-54
• /
• 2005

This is to evaluate the postoperative cephalometric changes of the chin advanced by the genioplasty. Thirty-eight patients who underwent advancement genioplasties at Ewha Womans University Mokdong Hospital between January of 2001 and February of 2003. They were followed up for at least 12 months with lateral cephalographs. The remodelling changes of the horizontal linear measurement between the Pogonion and Perpendicular line to FH plane were measured and analysed by Independent sample tests. The chin advancement resulted in $1.3{\pm}0.3mm$ resorption (28.2% of advancement) after 6 months, but in $1.4{\pm}0.2mm$ after 1 year. If the chin was advanced less than 3 mm, remodelling followed by $1.2{\pm}0.2mm$ reduction, but $1.3{\pm}0.3mm$ reduction followed after chin advanced over 4 mm. There were no significant differences in the amount of bone resorption by the gender, number of genial cut-steps and acompanied osteotomies.

• 대한치과교정학회지
• /
• 제24권4호
• /
• pp.799-817
• /
• 1994

The purpose of this study was to evaluate the initial skeletal pattern and growth change of whom had responsed well to chincap therapy. 93 patients seleted for this study were in mixed dentition and treated with chincap for more than 2 years. And 54 subjects were selected from these total samples and classified into two groups by the improvement of four measurements : ANB difference, APDI, Wits appraisal, and AF-BF. One was good response group which consisted of 26 children and the other was poor response group with 19 patients. Various measures of the craniofacial structure in the initial lateral cephalograms and the annual increments were calculated and analyzed by comparing two groups with t-test. The results were as follows : 1. Good response group had more horizontal growth pattern in initial stage of treatment than poor response group, and the contributing factors of this result were anterior posterior facial height ratio, gonial angle, lower genial angle and SN-mandibular plane angle. 2. The maxilla was positioned more anteriorly in good response group. 3. The amounts of vertical growth of maxilla was smaller but the horizontal growth of maxilla was larger in good response group. 4. The mandible rotated more infero-posteriorly in good response group. 5. The good response group had more vertical growth pattern of mandibular condyle.