• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 춘계학술대회 논문집
• /
• pp.674-678
• /
• 2003

This research is develop the sensing and measurement technology for measure that wheel/rail interaction force to use laser. Investigated existent laser measurement system, and examined transformation by load that action to wheel for achieve research purpose. A proposed to laser measurement system composition plan to analyze existent method that measure wheel/rail interaction force.

• Geomechanics and Engineering
• /
• 제32권1호
• /
• pp.21-34
• /
• 2023

In order to analyze the effect of the cyclic lateral loading on the response of a pile-soil system, a full-scale single steel pile was subjected to one-way cyclic loading. The test pile was driven into a bi-layered soil consisting of a normally consolidated saturated clay overlying a silty sandy layer, the site being submerged by water up to one meter above the mudline in order to reproduce the conditions of an offshore pile foundation. The aim of this paper is to present the main results of interpretation of the cyclic lateral tests in terms of pile deflections, bending moment, and cyclic P-Y curves. From these latter an absolute secant reaction modulus E_AS,N was derived and a simple calculation model of the test single pile is proposed based on this modulus. Two applications of the proposed model are carried out, one with a 2D finite element modelling, and the second with a load transfer curves-based method.

• 제어로봇시스템학회논문지
• /
• 제16권7호
• /
• pp.646-654
• /
• 2010

This paper describes an integrated chassis control for a maneuverability, a lateral stability and a rollover prevention of a vehicle by the using of the ESC and AFS. The integrated chassis control system consists of a supervisor, control algorithms and a coordinator. From the measured and estimation signals, the supervisor determines the vehicle driving situation about the lateral stability and rollover prevention. The control algorithms determine a desired yaw moment for lateral stability and a desired longitudinal force for the rollover prevention. In order to apply the control inputs, the coordinator determines a brake and active front steering inputs optimally based on the current status of the subject vehicle. To improve the reliability and to reduce the operating load of the proposed control algorithms, a multi-core ECU platform is used in this system. For the evaluation of this system, a closed loop simulations with driver-vehicle-controller system were conducted to investigate the performance of the proposed control strategy.

• 한국지반환경공학회 논문집
• /
• 제9권7호
• /
• pp.61-71
• /
• 2008

본 연구에서는 좁게 형성되는 프리캐스트 옹벽 배면에 상재하중을 재하 하였을 경우 마이크로파일의 수평저항 거동에 대한 설치 효율성을 규명하고자 하였다. 이를 확인하기 위한 수단으로 모형시험과 수치해석을 수행 하였다. 실내모형시험은 모형토조에 기초지반 조성 후 모형옹벽을 설치하였으며, 옹벽 배면에 상재하중을 재하 하여 마이크로파일의 설치간격 및 길이 등을 각각 변화시켜 수행하였다. 본 연구에서 보강된 마이크로파일이 프리캐스트 옹벽에 발생하는 수평방향 변형을 효과적으로 억제하는 것으로 나타났다. 마이크로파일의 간격을 좁게 설치하고 파일의 길이가 길어질수록 보강효율이 증가하는 경향을 보이며, 파일의 길이가 0.5H 설치간격은 7D에서 최적의 보강효율을 나타내는 것으로 평가되었다.

• 한국지반공학회논문집
• /
• 제35권11호
• /
• pp.25-36
• /
• 2019

차량이 도로를 이탈하여 성토부로 추락하는 것을 방지하기 위해 설치되는 연성 차량방호울타리는 사면부 시작점 근처에 도로방향으로 일렬로 근입된 무리말뚝과 무리말뚝 위에 부착되는 가드레일로 구성되어 있다. 차량방호울타리에 차량 충돌 시, 충돌에너지의 일부는 가드레일의 변형에 의해 흡수되며, 나머지 에너지는 가드레일을 지지하는 말뚝과 지반의 상호작용으로 저항하게 된다. 본 논문에서는 충격하중에 대한 말뚝과 지반의 상호작용을 원심모형실험을 수행하여 분석하였다. 풍화토로 다져진 경사지반에 설치된 단말뚝의 충격하중에 대한 극한지지력 및 거동특성을 분석하고자 하였다. 이를 위해 말뚝에 충격하중을 모사할 수 있는 하중재하시스템을 설계 및 구축하였다. 구축된 원심모형실험체 및 하중재하시스템을 이용하여 하중 및 지반조건에 대한 매개변수연구를 수행하였다. 최종적으로, 말뚝의 하중재하점에서 나타나는 하중-변위 곡선을 계측하여 충격극한지지력을 분석하였다. 또한, 휨모멘트 분포도로부터 산정된 지반반력 분포도를 도출하였고, 선행 연구결과와 비교하여 차량 방호울타리 지지말뚝의 지지거동을 분석하였다.

• 한국안전학회지
• /
• 제32권5호
• /
• pp.41-46
• /
• 2017

The coefficient of derailment and the rate of wheel load reduction were used as the index of train running safety that was directly affected the train derailment safety. In aspects of track, the train running safety depends on the complex interaction between wheel and rail, and the track-vehicle conditions (i.e., the curvature, cant, track system, vehicle speed and the operation conditions, etc). In this study, the relationship between the train running safety and the track curvature and vehicle speed for direct fixation concrete tracks currently employed in Korean light rapid transit was assessed by performing field tests using actual vehicles running along the service lines. The measured dynamic wheel load, lateral wheel load and lateral displacement of rail head were measured for same train running on four tested tracks under real conditions, which included curved and tangent tracks placed on the tunnel and bridge, thus increasing the train speed by approximately maximum design speed of each test site. Therefore, the measured dynamic track response was applied to the running safety analysis in order to evaluate the coefficient of derailment, the rate of wheel load reduction and the track gauge widening at each test site, and compare with the corresponding Korean train running safety standard. As the results, the lateral track response of direct fixation concrete track appeared to increase with the decreased track curvature; therefore, it was inferred that the track curvature directly affected the train running safety.

• 대한전기학회논문지:전력기술부문A
• /
• 제49권7호
• /
• pp.365-368
• /
• 2000

Traditionally, load flows have been calculated using the Gauss-Seidel and Newton-Raphson Method. DistFlow Method which is proposed by Wu and Baran is superior to the other two methods because it does not require the admittance matrix calculation to optimize the distribution system. This paper introduces a new alternative algorithm to the DistFlow Method which is slow and complex to find solutions as the number of lateral and sublateral increases. The proposed load flow method can construct System Jacobian easily. We can minimize the off-diagonal elements of the branch Jacobian and submatrices in the System Jacobian. Simulation results show that progressive performances of the proposed algorithm have a better convergence time.

• Earthquakes and Structures
• /
• 제10권1호
• /
• pp.163-178
• /
• 2016

Composite Lightweight (CL) insulated walls have gained wide adoption recently because the exterior claddings of steel building frames have their cost effectiveness, good thermal and structural efficiency. To investigate the seismic behavior, lateral stiffness, ductility and energy dissipation of steel frames with the CL infill walls, five one-story one-bay steel frames were fabricated and tested under cyclic loads. Test results showed that the bolted connections allow relative movement between CL infill walls and steel frames, enabling the system to exhibit satisfactory performance under lateral loads. Additionally, it is found that the addition of diagonal steel straps to the CL infill wall significantly increases the initial lateral stiffness, load-carrying capacity, ductility and energy dissipation capacity of the system. Furthermore, the test results indicate that the lateral stiffness values of the frames with the CL infill wall are similar to those of the bare steel frames in large lateral displacement.

• 한국강구조학회 논문집
• /
• 제12권2호통권45호
• /
• pp.209-219
• /
• 2000

콘크리트충전 강관구조는 합성효과에 의해 강관과 콘크리트의 단점을 상호보완하여 역학적으로 우수한 성능을 발휘할 수 있다. 그래서, 최근에는 초고층구조물시스템의 하나로 주목을 받고 있다. 본 연구의 목적은 일정축력과 반복 수평력을 받는 콘크리트 충전 각형강관기둥의 내력 및 변형성능을 평가하는 것이다. 이 실험의 변수로는 강관의 폭 두께비, 축력비, 콘크리트 강도, 하중가력방법과 콘크리트의 충전유무로 정하여 총 16개의 실험체를 제작하여 실험하였다. 실험결과로부터 실험체의 최대내력, 초기강성 및 변형성능에 대해 검토하였다.

• Advances in Computational Design
• /
• 제5권1호
• /
• pp.35-54
• /
• 2020

One of the prevailing structural systems in high-rise buildings is the core-wall system. On the other hand, the existence of one or more underground stories causes the perimeter below-grade walls with the diaphragm of grade level to constitute of a very stiff box. In this case or a similar situation, during the lateral response of a tall building, underground perimeter walls and diaphragms that provide an increased lateral resistance relative to the core wall may introduce a prying action in the core that is called backstay effect. In this case, a rather great force is generated at the diaphragm of the grade-level, acting in a reverse direction to the lateral force on the core-wall system, and thus typically causes a reverse internal shear. In this research, in addition to review of the results of the preceding studies, an improved relationship is proposed for prediction of backstay force. The new proposed relationship takes into account the effect of foundation flexibility and is presented in a non-dimensional form. Furthermore, a specific range of the backstay force to lateral load ratio has been determined. And finally, it is shown that although all suggested formulas are valid in the elastic domain, yet with some changes in the initial considerations, they can be applied to some certain non-linear problems as well.