• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.8-9
• /
• 2021

FCP requires different curvatures and shapes according to the method of division, and it is necessary to manufacture a formwork accordingly. FCP production equipment consists of CNC equipment and side shape control equipment. This can be implemented in various shapes of upper, lower, and side surfaces. In the side shape control equipment, it is implemented as a variable side formwork. Among the required performance of the variable side formwork, there is stiffness against side pressure, which needs to be verified. Therefore, in this study, the FCP fabrication experiment is conducted with the developed variable side formwork. By analyzing the error in the shape of the fabricated FCP, the lateral pressure resistance capability of the side form is measured and verified.

• The korean journal of orthodontics
• /
• v.22 no.2 s.37
• /
• pp.427-447
• /
• 1992

The purpose of this study was to evaluate the effect of the lateral displacement on the mandibular condylar growth in the rabbit. The experimental animals were twenty White NewZealand rabbits of 4-week old. Ten of them was used as control group, and experimental animal was composed of remaining ten. Laterodeviation appliance was made of cast base metal and appliance was cemented with resin in permanent fashion. Experimental group were sacrificed at 1, 2, 4, 6, 8 weeks form beginning of the experiment. Both of temporomandibular joint were prepared for histologic study. The conclusions are: 1. In control group, there was slight increase of proliferative zone and hypertrophic zone at 2-week control animal and slight reduction at 4-week. 6-week and 8-week control animal were similiar to 1-week control animal. 2. In right mandibular condyle of experimental group, 2-week experimental animal showed marked increase of proliferative zone and hypertrophic zone at posterior surface of condylar head. In 8-week experimental animal marked increase at anterior surface of anticular surface is observed. 3. In left mandibular condyle of experimental group, proliferative zone and hypertrophic zone were reduced at 1-week experimental animal and slight increase at 2-week. Proliferative zone and hypertrophic zone were reduced at 4-week experimental animal and were slightly increased at 6 week. 4. After 8 weeks, right and left condyle were not different in experimental group. The condylar cartilage was stabilized 8 weeks after the experiment. No marked traumatic change was seen, but minute focal bleeding was seen at articular cavity in 1-week, 2-week and 4-week experimental animal. 6-week and 8-week experimental animal did not show bleeding tendency in articular cavity.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.5
• /
• pp.621-626
• /
• 2019

The driver's steering wheel maneuver is a typical disturbance that causes excessive body motion and traveling instability of a vehicle. Abrupt and extreme operation can cause rollover depending on the geometric and dynamic characteristics, e.g., SUV vehicles. In this study, to cope with the performance limitation of conventional cars, fundamental research on the structurization of a control system was performed as follows. Mathematical modeling of the lateral behavior induced by driver input was carried out. A controller was designed to reduce the body motion based on this model. An algorithm was applied to secure robust control performance against modeling errors due to parameter uncertainty, $H_{\infty}$. Using the decoupled 1/4 car, a dynamic load simulating model considering the body moment was suggested. The simulation result showed the validity of the load-simulating model. The framework for a lateral behavior control system is proposed, including an experimental 1/4 vehicle unit, load simulating module, suspension control module, and hardware-in-the-loop simulation technology.

• Korean Journal of Applied Biomechanics
• /
• v.32 no.1
• /
• pp.9-16
• /
• 2022

Objective: The purpose of this study was to investigate how the chronic ankle instability affects postural control during forward jump landing. Method: 20 women with chronic ankle instability (age: 21.7 ± 1.6 yrs, height: 162.1 ± 3.7 cm, weight: 52.2 ± 5.8 kg) and 20 healthy adult women (age: 21.8 ± 1.6 yrs, height: 161.9 ± 4.4 cm, weight: 52.9 ± 7.2 kg) participated in this study. For the forward jump participants were instructed to stand on two legs at a distance of 40% of their body height from the center of force plate. Participants were jump forward over a 15 cm hurdle to the force plate and land on their non-dominant or affected leg. Kinetic and kinematic data were obtained using 8 motion capture cameras and 1 force plates and joint angle, vertical ground reaction force and center of pressure. All statistical analyses were using SPSS 25.0 program. The differences in variables between the two groups were compared through an independent sample t-test, and the significance level was to p < .05. Results: In the hip and knee joint angle, the CAI group showed a smaller flexion angle than the control group, and the knee joint valgus angle was significantly larger. In the case of ankle joint, the CAI group showed a large inversion angle at all events. In the kinetic variables, the vGRF was significantly greater in the CAI group than control group at IC and mGRF. In COP Y, the CAI group showed a lateral shifted center of pressure. Conclusion: Our results indicated that chronic ankle instability decreases the flexion angle of the hip and knee joint, increases the valgus angle of the knee joint, and increases the inversion angle of the ankle joint during landing. In addition, an increase in the maximum vertical ground reaction force and a lateral shifted center of pressure were observed. This suggests that chronic ankle instability increases the risk of non-contact knee injury as well as the risk of lateral ankle sprain during forward jump landing.

• Journal of Bio-Environment Control
• /
• v.14 no.4
• /
• pp.275-279
• /
• 2005

The fruiting habit pattern of white-spine cucumber, whose fruits are usually borne on the lateral branches, is different from domestic ones. The cucumber production far export has been focused on how to promote lateral shooting and how to increase the number of lateral branches. As the growing season of the exporting cucumber is confined to winter season, low temperature and weak light are limiting factors to lateral shooting. This study was conducted to investigate the effect of foliar application of growth regulator for induction of lateral shoot in white-spine cucumber. foliar application of growth regulator were focused on concentration and application time based on number of leaves. The visible damages were observed in applied leaves by $30mg{\cdot}L^{-1}$ BA(benzyladenine) in retarding culture, but no significant by $10mg{\cdot}L^{-1}$ BA in case of semi-forcing culture. The number of available lateral shoots were greater in applied plant with $10mg{\cdot}L^{-1}$ BA than that of $30mg{\cdot}L^{-1}$ BA, in applied plants at 10th and 15th loaves than that of applied plants at 5th leaves.

• The Journal of Internal Korean Medicine
• /
• v.35 no.4
• /
• pp.448-454
• /
• 2014

Objectives: The aim of this study was to analyze the change of lateral shift of Center of Pressure (CoP) according to the gait improvement in post-stroke hemiplegic patients and to investigate relationship between the change of motor grade and lateral shift of CoP. Methods: We measured the lateral shift of CoP and motor grade of eight post-stroke hemiplegic patients at the beginning of dependent gait and independent gait. Results: We found that CoP tended to be shifted to the non-affected side when patients started to walk independently. Furthermore, there was no relationship between the change of motor grade and lateral shift of CoP. Conclusions: This result may suggest it is more important to control the non-affected side than the affected side, at least until the beginning independent gait.

• Korean Journal of Agricultural Science
• /
• v.46 no.3
• /
• pp.549-557
• /
• 2019

Staphylococcal enterotoxin is a very common cause of food poisoning. Conventional detection methods for the toxin including enzyme-linked immunosorbent assays (ELISAs), chemiluminescence (ECL), and polymerase chain reaction (PCR) assays require a lot of time, efforts, and expert technicians. Lateral flow strip kits have shown great potential for the rapid detection of foodborne pathogens. The lateral flow strip kit is widely used in clinical settings because it is easy to use, fast, and cost effective. A typical lateral flow strip kit uses colloidal gold to generate a visual signal. However, the lateral flow strip kit based on colloidal gold has limited sensitivity to fulfill food safety regulation requirements. This study was performed to develop a rapid test kit for pathogenic staphylococcal enterotoxin B (SEB) in food samples. The rapid detection kit was fabricated based on a nitrocellulose lateral-flow strip. Cellulose nano beads and SEB antibodies were used as the tag and receptor, respectively, to improve the detection performance. Manually spotted SEB antibody and anti-rabbit antibody on the surface of the nitrocellulose membrane were used as test and control spots, respectively. The feasibility of the rapid test kit to detect SEB in samples was evaluated. The sensitivity of the kit was 10 ng/mL SEB spiked in PBS. Additionally, the rapid test kit could detect 1 ng/mL of SEB in chicken meat extract.

• Restorative Dentistry and Endodontics
• /
• v.21 no.1
• /
• pp.202-217
• /
• 1996

The purpose of this study was to compare the degree of microleakage of Glass-Ionomer root canal sealer possessed several enviable properties with that of the other sealers and to evaluate clinical performance. One hundred twenty single-rooted teeth were used in this experiment. The teeth were cleaned mechanically and immersed for 24 hours in 5.25% sodium hypochlorite and clinical crowns then were removed. After the root canals were instrumented using a step-back technique. one hundred twenty single-rooted teeth were divided into five groups of 24 in each. Group 1 : Tubli-Seal(Kerr Co., MI, U.S.A/ZOE-based), lateral condensation Group 2 : Sealapex(Kerr/Sybron, Romulus, MI/ $Ca(OH)_2$-based), lateral condensation Group 3 : AH 26(De Trey Co., Zurich Switzerland/Resin-based), lateral condensation Group 4 : Ketac-Endo(ESPE GMBH & CO. KG Seefeld:oberbay. Germany/ Glass Ionomer Cement-based), lateral condensation Control group : no sealer. lateral condensation And then. the root canals were obturated by lateral condensation technique with gutta-percha and experimental sealers. The control group were obturated without sealer. The teeth were placed in a vacuum chamber for 15 minutes and immersed 2% methylene blue under vacuum for 15 minutes. The teeth were passively stained for 1 week and 2 weeks and were cleared and evaluated for linear dye leakage using Tool maker's microscope(${\times}200$). The results were as follows: 1. There were statistically significant differences in the degree of dye penetration between the control group and experimental groups(p<0.05). 2. In the experimental groups, Sealapex($1.2871{\pm}0.9180mm$) exhibited the lowest mean value of dye penetration, followed by Ketac-Endo($1.4432{\pm}0.8082mm$), AH 26($1.5030{\pm}0.7752mm$) and Tubli-Seal($1.6458{\pm}1.0292mm$)(p>0.05). 3. There were statistically significant differences in the variation of microleakage between 1 week and 2weeks in Tubli-Seal and Seal apex groups (p<0.05). 4. The degree of dye penetration of all groups were increased as the time elapsed and AH 26 showed the lowest variation(+0.11) and Tubli-Seal(+ 1.03) showed the highest variation (p<0.001).

• Investigative Magnetic Resonance Imaging
• /
• v.15 no.1
• /
• pp.41-47
• /
• 2011

Purpose : To evaluate the cause of internal jugular vein (IJV) obstruction on contrast enhanced 3D MR angiography (CE-MRA) using contrast enhanced computed tomography (CE-CT). Materials and Methods : A total number of 30 patients were enrolled, who underwent both head and neck CE-MRA and CE-CT from 2005 to 2008. We defined obstruction group which had IJV obstruction and control group which had no IJV obstruction on CE-MRA. The following parameters were measured from axial images of CE-CT: 1) diameter of IJV; 2) distance between the styloid process and ipsilateral lateral mass of the atlas; 3) maximum area of lateral mass of the atlas. Each parameter was compared between obstruction group and control group. Results : The diameter of IJV and distance between the styloid process and lateral mass of the atlas at IJV obstruction side in obstruction group were $1.6{\pm}1.0\;mm$ and $4.1{\pm}2.1\;mm$ respectively, which resulted in statistical significance (p<0.01). The maximum area of lateral mass of the atlas at IJV obstruction side in obstruction group was $103.4{\pm}25.3\;mm^2$ which is significantly larger than in control group (p<0.05). Conclusion : We found that the cause of IJV obstruction on CE-MRA could be narrow space between the styloid process and the lateral mass of the atlas, which was related with asymmetric larger area of lateral mass of atlas.

• Journal of Bio-Environment Control
• /
• v.14 no.1
• /
• pp.52-55
• /
• 2005

An experiment was conducted to evaluate the efficacy of continuous lateral shoot pinching and gradual adjustment of drip irrigation lines in improving plant health as well as fruit yield and quality in white-spined cucumber grown in the greenhouse. Grafted white-spined cucumber seedlings were established at a density of 18,000 plants per ha in a greenhouse. Main stems were pinched at 21st node. Each of the lateral shoots was pinched at the 3rd node and 2-3 fruits per lateral shoot were harvested. Drip irrigation lines were gradually adjusted to provide water to the area of maximum root concentration. Plants grown with these combined treatments produced $55\%$ more lateral shoots and 38% more marketable yield, as compared to the control.