• 제어로봇시스템학회논문지
• /
• 제12권7호
• /
• pp.621-630
• /
• 2006

The T-50 advanced trainer aircraft combines advanced aerodynamic features and a fly-by-wire flight control system in order to produce a stability and highly maneuverability. The flight control system both longitudinal and lateral-directional axes to achieve performance enhancements and improve stability. The T-50 employs the RSS concept in order to improve the aerodynamic performance in longitudinal axis and the longitudinal control laws employ the dynamic inversion with proportional-plus-integral control method. And, lateral-directional control laws employ the blended roll system both beta-betadot feedback and simple roll rate feedback with proportional control method in order to guarantee aircraft stability. This paper details the design process of developing lateral-directional control laws, utilizing the requirement of MIL-F-8785C and MIL-F-9490D. And, this paper propose the analysis of aircraft characteristics such as dutch-roll mode, roll mode, spiral mode, gain and phase margin about gains for lateral-directional inner loop feedback.

• 한국항공우주학회지
• /
• 제47권6호
• /
• pp.422-428
• /
• 2019

수직미익이 없는 전익기 형상은 낮은 레이더반사면적(RCS) 특성으로 인해 최근 UCAV를 위한 대표적인 형상으로 대두되고 있다. 무미익 전익기 형상은 방향축 관점에서 보면 정적으로 불안정하면서도 이를 효과적으로 제어하기 위한 수직 조종면이 없다는 두 가지 난제를 모두 갖고 있다. 이같은 형상을 제어하기 위해서는 추력 벡터링을 적용하거나 날개의 항력차이를 이용하는 드래그 러더(Drag Rudder) 형태의 에일러론 또는 스포일러 등을 적용할 수 있다. 본 논문에서는 전익기 형상의 횡방향축 공력특성 및 드래그 러더 중 스포일러 형태의 조종면에 대한 공력특성을 설명한다. 또한, PI 구조의 제어설계 기법을 사용하여 전익기의 횡방향축 운동을 효과적으로 제어할 수 있음을 제시하고, 비행시험을 통하여 설계된 제어기로 안정적인 비행이 가능함을 보였다.

• 항공우주시스템공학회지
• /
• 제8권4호
• /
• pp.24-31
• /
• 2014

The modern version of aircrafts is allowed to guarantee the superior handing qualities within the entire flight envelope by imposing the adequate stability and flying qualities on a target aircraft through the various techniques of flight control law design. Generally, the flight control law of the aircraft in service applies the various techniques of the verified control algorithm, such as dynamic inversion and eigenstructure assignment. The supersonic trainer employs the RSS(Relaxed Static Stability) concept in order to improve the aerodynamic performance in longitudinal axis and the longitudinal control laws employ the dynamic inversion with proportional-plus-integral control method. And, lateral-directional control laws employ the blended roll system of both beta-betadot feedback and simple roll rate feedback with proportional control method in order to guarantee aircraft stability. In this paper, the lateral-directional flight control law is designed by applying dynamic inversion control technique as a different method from the current supersonic trainer control technique, where the roll rate command system is designed at the lateral axis for the rapid response characteristics, and the sideslip command system is adopted at the directional axis for stability augmentation. The dynamic inversion of a simple 1st order model is applied. And this designed flight control law is confirmed to satisfy the requirement presented from the military specification. This study is expected to contribute to design the flight control law of KF-X(Korean Fighter eXperimental) which will proceed into the full-scale development in the near future.

• Journal of Mechanical Science and Technology
• /
• 제17권5호
• /
• pp.654-667
• /
• 2003

This paper presents a consequence of the systematic approach to identify the aerodynamic parameters of an unmanned aerial vehicle (UAV) equipped with the automatic flight control system. A 3-2-1-1 excitation is applied for the longitudinal mode while a multi-step input is applied for lateral/directional excitation. Optimal time step for excitation is sought to provide the broad input bandwidth. A fully automated programmed flight test method provides high-quality flight data for system identification using the flight control computer with longitudinal and lateral/directional autopilots, which enable the separation of each motion during the flight test. The accuracy of the longitudinal system identification is improved by an additional use of the closed-loop flight test data. A constrained optimization scheme is applied to estimate the aerodynamic coefficients that best describe the time response of the vehicle. An appropriate weighting function is introduced to balance the flight modes. As a result, concurrent system models are obtained for a wide envelope of both longitudinal and lateral/directional flight maneuvers while maintaining the physical meanings of each parameter.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.458-463
• /
• 2000

This paper presents a design of the controller for vehicle lateral dynamics using active yaw moment. Vehicle lateral motion is incorporated with directional controllability and stability. These are conflicting each other from the view of vehicle handling performance. To compromise the trade-off between these two aspects, we suggest a new control algorithm based on the sliding mode with time-varying switching surface according to the body side slip angle. The controller can deal with the nonlinear region in vehicle driving and be robust to the parameter uncertainties in the plant model. Control performance was evaluated from the simulation.

• 한국항공우주학회지
• /
• 제33권2호
• /
• pp.106-112
• /
• 2005

현대의 고성능 전투기는 공대공 및 공대지 전투 임무를 수행하기 위해 여러 가지 무장 형상을 하고 있고, 무장투하 시 비대칭 형상(Asymmetric Configuration)으로 임무를 수행하는 경우가 많다. 현재, 개발이 진행 중인 T-50 훈련기의 비대칭 무장형상 비행시험에서 세로축 기동 시 가로축 방향으로 조종사가 원하지 않는 운동이 발생하는데, 이는 항공기 안정성 및 조종성에 영향을 미칠 수 있다. 본 연구에서는 이러한 현상을 개선하기 위하여 기존의 가로축 제어법칙인 미끄럼각-미끄럼각속도 귀환 구조를 F-16과 같이 단순 롤각속도 귀환구조로 적용하였다. 연구결과, 단순 롤각속도 귀환구조로 가로축 제어법칙을 변경하였을 때 비대칭 무장형상에서 세로축 기동 시 가로축 운동의 발생이 줄어들었으며, 시스템의 안정도 여유는 설계기준에 만족한다는 것을 알 수 있었다.

• 제어로봇시스템학회논문지
• /
• 제12권7호
• /
• pp.713-718
• /
• 2006

Supersonic jet fighter aircraft have several different weapon loading configuration to support air-to-air combat and air-to-ground delivery of weapon modes. Especially, asymmetric loading configurations could result in decreased handling qualities for the pilot maneuvering of the aircraft. The design of the T-50 lateral-directional roll axis control laws change from beta-betadot feedback structure to simple roll rate feedback structure and gains such as F-16 in order to improve roll-off phenomena during pitch maneuver in asymmetric loading configuration. Consequently, it is found that the improved control law decreases the roll-off phenomenon in lateral axes during pitch maneuver, but initial roll response is very fast and wing pitching moment is increased. In this paper, we propose the lateral control law blending between beta-betadot and simple roll rate feedback system in order to decreases the roll-off phenomenon in lateral axes during pitch maneuver without degrading of roll performance.

• 한국지능시스템학회논문지
• /
• 제24권4호
• /
• pp.412-417
• /
• 2014

본 논문은 세 개의 바퀴로 구동되는 전방향 이동로봇의 제작과 제어에 대해 소개한다. 전방향성 움직임은 독립적인 회전과 병진운동을 통해 이루어진다. 전방향 이동로봇의 기구학과 동역학을 사용하여 장애물 회피에 대한 시뮬레이션도 수행하였다. 실제 로봇을 제어하기 위해 로봇을 제작하고 하드웨어를 구성하였으며, 제어 알고리즘은 DSP와 FPGA 칩에 구현하였다. 모터제어에 필요한 PWM, 엔코더 카운터, 통신 등과 같은 하드웨어는 FPGA에 구현하였다. 조이스틱을 통한 전방향 이동로봇을 제어함으로써 로봇의 동작성을 확인하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1995년도 Proceedings of the Korea Automation Control Conference, 10th (KACC); Seoul, Korea; 23-25 Oct. 1995
• /
• pp.236-239
• /
• 1995

It is useful to simulate the human visual function for the purpose of image-processing. In this study, the hardware of the spatial filter with the sensitivity of lateral inhibition is realized by the combination of optical parts with electronic circuits. The diffused film with the characteristics of Gaussian type is prepared as a spatial filter. An object's image is convoluted with the spatial filter. From the difference of the convoluted images, the zero-cross position is detected at video rate. The edge of object is extracted in real-time by the use of this equipment. The resolution of edge changes with the value of the standard deviation of diffused film. In addition, it is possible to extract a directional edge selectively when the spatial filter with directional selectivity is used instead of Gaussian type of spatial filter.

• Coupled systems mechanics
• /
• 제5권2호
• /
• pp.101-126
• /
• 2016

Seismic structural fragility constitutes an important step for performance based seismic design. Lateral load-resisting structural members are often analyzed under one component base excitation, while the effect of bi-directional shaking is accounted per simplified rules. Fragility curves are constructed herein under real bi-directional excitation by a simple extension of the conventional Incremental Dynamic Analysis (IDA) under uni-directional shaking. Simple SODF systems, parametrically adjusted to different periods, are examined under a set of near-fault and far-fault excitations. Consideration of bi-directional interaction appears important for stiff systems. Further, the study indicates that the peak ground accelertaion, velocity and displacement (PGA, PGV and PGD) of accelerogram are relatively stable and efficient intensity measures for short, medium and long period systems respectively. '30%' combination rule seems to reasonably predict the fragility under bi-directional shaking at least for first mode dominated systems dealt herein up to a limit state of damage control.