• 한국레이저가공학회지
• /
• 제15권2호
• /
• pp.11-14
• /
• 2012

In this paper, we have made a proposal concerning the beam shaping mask(BSM) using random-array slits to control intensity distribution profile of laser beam and demonstrated its proprieties experimentally. When a lot of slits are set out irregularly, diffraction patterns of light does not appear but granularity patterns as a bundle of fibers appear. Intensity distribution profile is controlled by densities distribution of circular slits arrayed randomly because the number of slits and its area means amount of light energy through BSM. Namely as the number of slits in high intensity area is increased and that in low intensity area decreased, amount of light energy is same over all local parts. So gaussian intensity distribution could be changed to flat-top.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.285-287
• /
• 2009

When the laser diode is operated with continuous current, the light intensity from the laser diode deceases with time due to the temperature rise in the active layer. The phenomena, which is often called as DROOP, should be minimized in order to be used as a light source for the laser beam printer. We experimently examined the influences of the laser parameters such as threshold current, differential quantum efficiency on droop. It was found that decreasing the differential quantum efficiency of the laser diode is the effective way to minimize droop.

• 한국생산제조학회지
• /
• 제26권1호
• /
• pp.44-49
• /
• 2017

Titanium has been used in various fields due to its good corrosion and erosion resistance, and superior mechanical properties. The process for selective electro-deposition on a titanium surface using laser beam is proposed in this paper. The process consists of laser irradiation, electro-deposition, and ultrasonic cleaning. Laser irradiation can change the surface morphology of titanium. Through laser irradiation, the surface cleaning effect and a rough surface can be achieved. The surface roughness of titanium was measured according to the laser beam conditions. The characteristics of selective electro-deposition on titanium surface according to surface roughness are investigated by various analytical methods such as SEM, and EDS.

• 한국정밀공학회지
• /
• 제31권1호
• /
• pp.75-81
• /
• 2014

Laser beam machining has been known as efficient for glass micromachining. It is usually used the ultra-short pulsed laser which is time-consuming and uneconomic process. In order to use economic and powerful long pulsed laser, indirect processing called laser-induced backside wet etching (LIBWE) is good alternative method. In this paper, micromachining of glass using Nd:YAG laser with nanosecond pulsed beam has been attempted. In order to improve shape accuracy, combined processing with magnetic stirrer has been widely used. Magnetic stirrer acts to circulate the solution and remove the bubble but it is not suitable for deep hole machining. To get better effect, ultrasonic vibration was applied for improving shape accuracy.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.1053-1057
• /
• 1997

Laser thin film process with a Q-switch pulsed YAG laser was performed for micro machining. In this research, we performed basic Cr thin film on glass substrates removal machining experiments. Form experiments, it happens not only evaporration of thin film but also spatter and cohesion of melting substance in working region, when machining a Cr thin film by Q-switch YAG laser beam irradiation. Critical energy of surface irradiation type by irradiation direction of laser in a face composing thin film on the glass is higher than that of back irradiation type, but the latter is favorable because of spatter appearance. In case of image formation position when laser beam is irradiated, the defocus is permitted to a certain extent within forcus depth. Ifexceeds focus depth, formation of pattern is vanishing step by step.

• 한국레이저가공학회지
• /
• 제15권4호
• /
• pp.6-11
• /
• 2012

Laser beam can be either absorbed or scattered in porous ceramic material and its optical characteristics need to be understood. Electro-magnetic multiphysics software was used to simulate and understand the actual scattering phenomena in porous materials. 785nm femtosecond laser was irradiated on the surface of ceramic material and strong scattering occurred in drilling process. The computer results showed the scattering and absorption phenomena of Aluminum oxide were a mixture of dielectric and metallic material. The computer simulation showed the laser beam was almost extinct at the aspect rate of 5 approximately.

• Transactions on Electrical and Electronic Materials
• /
• 제8권6호
• /
• pp.289-292
• /
• 2007

Polymethly methacrylate(PMMA) and polydimethlysiloxane(PDMS) surfaces were treated to improve adhesiveness by irradiation of a Nd:YAG pulse laser beam($\lambda=266nm$). A pulse laser beam was directed on a polymer surface in air, and the number of pulses was controlled by mobile velocity of a motorized stage. The laser treated surfaces were investigated using an optical microscope and a contact angle measuring instrument. It was thereby revealed that the contact angles were decreased in the laser treated surface. This in turn led to an increase of oxygen content and improved adhesiveness on the modified surface. With improved surface adhesion, a fluid channel could be formed on the laser treated surface region.

• 한국광학회지
• /
• 제10권3호
• /
• pp.221-225
• /
• 1999

레이저선속의 퍼짐각을 개선하기 위하여 공진기 내부에 선속분할기를 갖는 양영역 공초점 불안정공진기 구리증기레이저를 구성하였다. 기하광학적 배율 M=30인 공진기에서 0.15 mard의 최소 퍼짐각을 얻었고, M=60인 공진기를 사용하여 0.1 mard 의 값을 얻을 수 있었다. 퍼짐각 개선과 관련하여 상대적인 원거리 출력밀도가 최대 130배 증가된 레이저 출력을 얻을 수 있었으며, 자체잠김현상을 보이는 펄스 형태의 레이저 발진이 관측되었다.

• 한국기계가공학회지
• /
• 제18권5호
• /
• pp.74-81
• /
• 2019

This study reports the CW $CO_2$ laser scribing of soda lime glass. In this study, scribing experiments are carried out at different laser powers, scan speeds, and focal positions to investigate the effect of the process parameters on the interaction characteristics between a laser beam and glass. In particular, the interaction characteristics are analyzed and described with the input laser energy per unit length. According to the experimental results, the damage threshold for the glass surface was found to exist between 0.072 and 0.08 J/mm. The input laser energy in this region induced partial melting of the surface and grain-shaped cracks. These cracks tended to increase as the input laser energy increased. At the laser input energy larger than 1 J/mm, a huge crack propagating along the scan direction was produced, and the volume below the scribed area was fully melted. The growth of this crack finally resulted in the complete cutting of the glass at the input laser energy above 8 J/mm. It was found that both the width and depth of the scribed line increased with increasing input laser energy. For the beam focusing at the rear surface, the width of the scribed line varied irregularly. This could be ascribed to the increased asymmetry of the beam intensity distribution when the laser beam was focused at the rear surface. Under this condition, a large burr was only produced on one side of the scribed line.

• 한국광학회지
• /
• 제5권1호
• /
• pp.60-66
• /
• 1994

양영역 불안정형(Positive Branch Unstable) Nd:YAG 레이저 공진기를 모델링하여 공진기내의 TE$M_{00}$ 기본모우드의 waist에 대한 수치해석을 하였으며 이를 토대로 레이저 공진기를 설계 제작하였다. 레이저봉의 열렌즈 초점거리를 측정하였으며 이를 이용하여 빔 waist에서의 TE$M_{00}$ 모우드의 spot size에 대한 계산치와 실험치를 비교하였다. 그리고 고반복률로 발진하는 다중모우드(multimode)의 spot size를 측정하여 beam quality factor $M^2$을 산출하였다. 한편 불안정 공진기에서 얻어진 출력실험 결과를 Plane-Parallel 공진기의 경우에 비교하여 그 특성을 평가하였다.