Browse > Article
http://dx.doi.org/10.7735/ksmte.2017.26.1.44

Selective Electrodeposition on Titanium Surface Using Laser Beam  

Shin, Hong Shik (Department of Energy System Engineering, Korea National University of Transportation)
Publication Information
Journal of the Korean Society of Manufacturing Technology Engineers / v.26, no.1, 2017 , pp. 44-49 More about this Journal
Abstract
Titanium has been used in various fields due to its good corrosion and erosion resistance, and superior mechanical properties. The process for selective electro-deposition on a titanium surface using laser beam is proposed in this paper. The process consists of laser irradiation, electro-deposition, and ultrasonic cleaning. Laser irradiation can change the surface morphology of titanium. Through laser irradiation, the surface cleaning effect and a rough surface can be achieved. The surface roughness of titanium was measured according to the laser beam conditions. The characteristics of selective electro-deposition on titanium surface according to surface roughness are investigated by various analytical methods such as SEM, and EDS.
Keywords
Laser irradiation; Selective electrodeposition; Copper layer; Titanium; Surface morphology;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Schlesinger, M., Paunovic, M., 2010, Modern Electroplating, Wiley, NJ.
2 Romankiw, L. T., 1997, A path: from Electroplating through Lithographic Masks in Electronics to LIGA in MEMS, Microsyst. Technol. 42:20-22 2985-3005.
3 Wee, L. M., Li, L., 2005, Multiple-layer Laser Direct Writing Metal Deposition in Electrolyte Solution, Appl. Surf. Sci., 247:1-4 285-293.   DOI
4 Ashfold, M. N., Claeyssens, F., Fuge G. M., Henley S. J., 2004, Pulsed Laser Ablation and Deposition of Thin Film, Chem. Soc. Rev., 33:1 23-31.   DOI
5 Cho, C. H., Shin, H. S., Chu, C. N., 2013, Selective Electrodeposition of Copper on Stainless Steel using Laser Irradiation, Surf. Coat. Technol., 222:5 15-24.   DOI
6 Shin, H. S., Choi, S. Y., 2015, Selective Electrodeposition using Laser Masking and DC Voltage, Journal of KSMTE., 24:1 75-80.   DOI
7 Lee, S. W., Shin, H. S., Chu, C. N., 2013, Fabrication of Micro-pin Array with High Aspect Ratio on Stainless Steel using Nanosecond Laser Beam Machining, Appl. Surf. Sci., 264:1 653-663.   DOI
8 Kwon, M. H., Shin, H. S., Chu, C. N., 2014, Fabrication of a Super-hydrophobic Surface on Metal using Laser Ablation and Electrodeposition, Appl. Surf. Sci., 288:1 222-228.   DOI
9 Madou, M. J., 2002, Fundamental of Microfabrication, CRC press LLC, Boca Raton.
10 Paunovic, M., Schlesinger, M., 2006, Fundamentals of Electrochemical Deposition, John Wiley & Sons, NJ.
11 Turner, M. W., Crouse, P. L., Li, L., 2006, Comparison of Mechanisms and Effects of Nd:YAG and CO2 Laser Cleaning of Titanium Alloys. Appl. Surf. Sci., 252:13 4792-4797.   DOI
12 Siano, S., Agresti, J., Cacciari, I., Ciofini, D. L., Mascalchi, M, Osticiloli, I, Mencaglia, A. A., 2012, Laser Cleaning in Conservation of Stone, Metal, and Painted Artifacts: State of the Art and New Insights on the use of the Nd:YAG lasers, Appl. Phys. A., 106:2 419-446.
13 Sartinska, L. L., Barchikovski, S., Wagenda, N., Rud, B. M., Timofeeva, I. I., 2007, Laser Induced Modification Surface Structures, Appl. Surf. Sci., 253:9 4295-4299.   DOI
14 Lv, M., Liu, J., Zeng, X., Du, Q., Ai, J., 2015, High-adhesion Cu Patterns Fabricated by Nanosecond Laser Modification and Electroless Copper Plating, Appl. Surf. Sci., 353: 1150-1155.   DOI
15 Lim, J. D., Susna, Y. S. Y., Daniel, R. M., Leong, K. C., Wong, C. C., 2013, Surface Roughness Effect on Copper-alumina Adhesion, Microelectron. Reliab., 53:9-11 1548-1552.   DOI
16 Sun, R. R., Tryk, D. A., Hashimoto, K., Fujishima, A., 2007, Adhesion of Electroless Deposited Cu on ZnO-coated Glass Substrates: The Effect of the ZnO surface Morphology, J. Electrochem. Soc., 146:6 2117-2122.   DOI