DOI QR코드

DOI QR Code

Enhancement of Polymer Surface Adhesion by Laser Beam Irradiation for Microfluidic Chip Application: Formation of a Channel on a Modified Surface

  • Shin, Sung-Kwon (Department of Electrical Engineering, Inha University) ;
  • Lee, Cheon (Department of Electrical Engineering, Inha University)
  • Published : 2007.12.31

Abstract

Polymethly methacrylate(PMMA) and polydimethlysiloxane(PDMS) surfaces were treated to improve adhesiveness by irradiation of a Nd:YAG pulse laser beam($\lambda=266nm$). A pulse laser beam was directed on a polymer surface in air, and the number of pulses was controlled by mobile velocity of a motorized stage. The laser treated surfaces were investigated using an optical microscope and a contact angle measuring instrument. It was thereby revealed that the contact angles were decreased in the laser treated surface. This in turn led to an increase of oxygen content and improved adhesiveness on the modified surface. With improved surface adhesion, a fluid channel could be formed on the laser treated surface region.

Keywords

References

  1. R. E. Oosterbroek and A. van den Berg, 'Lab-on-a-chip', Elsevier, p. 65, 2000
  2. E. M. Liston, L. Martinu, and M. R. Wertheimer, 'Plasma surface modification of polymers for improved adhesion: A critical review', J. Adhesion Sci. Technol., Vol. 7, p. 1091, 1993
  3. J. A. Folkes, 'Developments in laser surface modificaion and coating', Surf. Coation Technol., Vol. 63, p. 65, 1994
  4. J. R. J. Wingfield, 'Treatment of composite surfaces for adhesive bonding', Int. J. Adhes., Vol. 13, p. 151, 1993
  5. H. Dodiuk, A. Buchman, M. Rotel, and J. Tachai, Int. Conf. on Advanced Composite Materials (Warrendale, PA: TMS, 1993), p. 433, 1993
  6. A. Buchman, H. Dodiuk, M. Rotel, and J. Zahavi, 'Preadhesion treatment of thermoplastic adherends using excimer laser', Int. J. Adhes., Vol. 11, p. 144, 1991
  7. E. Wurzberg, A. Buchman, E. Zylberstein, Y. Holdengraber, and H. Dodiuk, 'Preadhesion laser surface treatment of polycarbonate and polyetherimide', Int. J. Adhes., Vol. 10, p. 254, 1990
  8. J. P. Fouassier and J. F. Rabek, 'Laser in polymer science and technology: Applications', CRC press, Florida, Vol. 3, p. 169, 1990
  9. C. Lee, D. Y. Kim, J. H. Kim, K. C. Lee, and C. S. Hui, 'Surface modification of silicon by laser surface treatment: Improvement of adhesion and copper deposition', J. Electronic Mater., Vol. 34, p. 132, 2005 https://doi.org/10.1007/s11664-005-0223-1
  10. P. Laurens, M. Ould Bouali, F. Meducin, and B. Sadras, 'Characterization of polymer surfaces after excimer laser treatments below the ablation threshold', Appl. Surf. Sci., Vol. 154, p. 211, 2000
  11. J. Y. Cheng, C. W. Wei, K. H. Hsu, and T. H. Young, 'Direct-write laser micromachining and universal surface modification of PMMA for device development', Sen. and Actuator B, Vol. 99, p. 186, 2004 https://doi.org/10.1016/j.snb.2003.10.022
  12. M. Y. Ahn, K. C. Lee, H. K. Lee, S. D. Lee, and C. Lee, 'Etching of the PDP barrier rib material using laser beam', J. of KIEEME(in Korean), Vol. 13, No. 6, p. 526, 2000