• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.47-50
• /
• 2000

Optical triangulation is one of the most common methods for acquiring range data. Using this method. We have developed a new type of Laser Displacement Sensor. We used Area CCD instead of linear CCD and PSD (Position Sensitive Detector). And we have developed the robust algorithm for increasing the accuracy and used USB instead of RS-232C for increasing speed. We present results that demonstrate the validity of our method using optical triangulation technique, Area CCD, and USB.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권5호
• /
• pp.2414-2433
• /
• 2019

The aim of this paper is to design a 3D laser radar prototype based on laser triangulation. The mathematical model of distance sensitivity is deduced; a pixel-distance conversion formula is discussed and used to complete 3D scanning. The center position extraction algorithm of the spot is proposed, and the error of the linear laser, camera distortion and installation are corrected by using the proposed weighted average algorithm. Finally, the three-dimensional analytic computational algorithm is given to transform the measured distance into point cloud data. The experimental results show that this 3D laser radar can accomplish the 3D object scanning and the environment 3D reconstruction task. In addition, the experiment result proves that the product of the camera focal length and the baseline length is the key factor to influence measurement accuracy.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.690-695
• /
• 2004

A new dimension measuring method for the measurement of diameter of an object has been developed using laser triangulation. The 3-D data of an object was calculated from the 2dimensional image information obtained by the laser stripe using the laser triangulation. The system can measure the diameter of hole not only in a normal plane but also in an incline plane. We can experiment with magnification that is optimized according to size of object using zoom lens. In this paper, the theoretical formula and calibration of the system were described. The measuring precision of the system was investigated by experiment.

• 한국정밀공학회지
• /
• 제16권7호
• /
• pp.40-50
• /
• 1999

Recently, a laser displacement sensor is widely used for the manufacturing automation. The sensor is generally composed of a diode laser and a light receiving device. The diode laser emits a laser beam and the receiving device detects the light reflected from the measured object. The object position is obtained based upon triangulation method. As a light receiving device, a PSD is usually utilized since its structure is very simple and rugged and has a high accuracy. Although the theoretical relationship for this sensor had been developed, the characteristics of the sensor have not been much experimentally studied. In this paper, several experimental results will presented. The measurement accuracy is affected by the surface conditions such as the reflectance characteristics, the angle of the object's surface and the laser intensity. In addition, it is found that the PSD and the signal processing circuit have nonlinearities and showed that those nonlinearities can be reduced by controlling the emitting laser intensity.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 추계종합학술대회
• /
• pp.868-871
• /
• 2003

본 논문은 Laser의 특성인 단색성(monochromaticity), 지향성(directivity), 간섭성(interference), 에너지 집중도 및 고휘도(brightness), 위상의 균일성(응집도, coherence) 등을 이용한 여러 응용 중에서 거리측정에 관한 것이며, Laser를 이용한 거리측정은 빛의 파장, 빛의 진직성, 삼각측량, 변조 빛의 파장에 의한 방법 등이 있다. 본 논문에서는 기존의 삼각측량법을 개선한 삼각측량법으로 일정한 거리에 위치한 두 개의 Laser를 CPU가 0-90$^{\circ}$ 까지 Laser 각도를 움직여 측정 대상 물체에 비춰지는 상을 가지고 거리를 측정한다. Laser의 정확한 각도제어, 빠른 거리 계산, 필요에 따라 이미지 처리까지 필요함으로 Intel사의 고성능 마이크로 프로세서인 SrongArm (SA1110)을 기반으로 한 하드웨어를 구상하였다.

• 한국정보통신학회논문지
• /
• 제3권4호
• /
• pp.859-865
• /
• 1999

3차원 정보를 얻기 위해서는 레이저나 카메라와 같은 많은 센서들이 이용된다. 그러나 대부분의 레이저 캘리브레이션 방법은 많은 량의 메모리와 실험 데이터가 필요하기 때문에 비효율적인 방법이다. 본 논문에서 제시하는 방법은 레이저 캘리브레이션 데이터를 단순히 삼각법을 이용하여 구하기 때문에 컴퓨터의 메모리와 실험 데이터의 량을 줄일 수 있는 장점이 있다. 실 세계상에 놓여있는 물체의 3차원 정보를 얻기 위해서는 레이저 캘리브레이션이 필요한데 본 논문에서는 삼각법을 이용한 슬릿 빔 레이저 캘리브레이션 방법을 소개하고자 한다. xy테이블에 수직으로 설치된 레이저빔이 아랫 방향으로 사영되고 CCD 카메라는 물체와 사영면이 교차하는 교차면 데이터를 저장한 후 저장된 관측 데이터와 캘리브레이션 데이터를 이용하여 3차원 정보를 얻게된다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 1999년도 춘계종합학술대회
• /
• pp.168-173
• /
• 1999

3차원 정보를 얻기 위해서는 레이저나 카메라와 같은 많은 센서들이 이용된다. 그러나 대부분의 레이저 캘리브레이션 방법은 많은 량의 메모리와 실험 데이터가 필요하기 때문에 비효율적인 방법이다. 실 세계상에 놓여있는 물체의 3차원 정보를 얻기 위해서는 레이저 캘리브레이션이 필요한데 본 논문에서는 삼각법을 이용한 슬릿 빔 레이저 캘리브레이션 방법을 소개하고자 한다. xy테이블에 수직으로 설치된 레이저 빔이 아랫 방향으로 사영되고 CCD 카메라는 물체와 사영면이 교차하는 교차면 데이터를 저장한 후 저장된 관측 데이터와 캘리브레이션 데이터를 이용하여 3차원 정보를 얻게된다. 본 논문에서 제시하는 방법은 레이저 캘리브레이션 데이터를 단순히 삼각법을 이용하여 구하기 때문에 컴퓨터의 메모리와 실험 데이터의 량을 줄일 수 있는 장점이 있다.

• 대한기계학회논문집A
• /
• 제25권8호
• /
• pp.1246-1252
• /
• 2001

Reverse engineering has been widely used for the shape reconstruction of an object without CAD data and the measurement of clay or wood models for the development of new products. To generate a surface from measured points by a laser scanner, typical steps include the scanning of a clay or wood model and the generation of manufacturing data like STL file. A laser scanner has a great potential to get geometrical data of a model for its fast measuring speed and higher precision. The data from a laser scanner are composed of many line stripes of points. A new approach to remove point data with Delaunay triangulation is introduced to deal with problems during reverse engineering process. This approach can be used to reduce a number of measuring data from laser scanner within tolerance, thus it can avoid the time for handling point data during modelling process and the time for verifying and slicing STL model during RP process.

• 제어로봇시스템학회논문지
• /
• 제11권1호
• /
• pp.34-40
• /
• 2005

In this paper, we describe the modeling for the 3D robot laser scanning system consisting of a laser stripe projector, camera, and 5-DOF robot and propose its calibration method. Nonlinear radial distortion in the camera model is considered for improving the calibration accuracy. The 3D range data is calculated using the optical triangulation principle which uses the geometrical relationship between the camera and the laser stripe plane. For optimal estimation of the system model parameters, real-coded genetic algorithm is applied in the calibration process. Experimental results show that the constructed system is able to measure the 3D position within about 1mm error. The proposed scheme could be applied to the kinematically dissimilar robot system without losing the generality and has a potential for recognition for the unknown environment.

• 지구물리
• /
• 제8권3호
• /
• pp.153-157
• /
• 2005

A discussion of a method has been used with success in terrain modelling to estimate the height at any point on the land surface from irregularly distributed samples. The special requirements of terrain modelling are discussed as well as a detailed description of the algorithm and an example of its application.