• 한국통신학회논문지
• /
• 제31권12A호
• /
• pp.1177-1181
• /
• 2006

본 논문에서는 링 레이저를 위한 새로운 광대역 파장 가변 필터를 제안하였다. 두 종류의 필터를 제안하였는데, Fiber Reflection Mach-Zehnder Interferometer와 Sagnac필터로 구성된 것과 하이브리드 필터와 Fiber Reflection Mach-Zehnder Interferometer로 구성된 것이다. 시뮬레이션을 통해 50nm의 연속적인 파장 가변을 얻을 수 있음을 알 수 있었고, 기존의 필터에 비해 파장 가변 범위가 3배에 이르면서도 FWHM이 1/3로 줄어든 통과 스펙트럼 특성을 얻을 수 있었다. 이는 링 레이저의 광대력 파장 가변 및 안정적인 단일모드 발진을 더욱 가능케 하는 중요한 특성이다.

• 산업기술연구
• /
• 제26권A호
• /
• pp.95-99
• /
• 2006

In this paper, we proposed the new wavelength tunable filter for wide tunability of fiber ring laser. The proposed filter consists of the cascaded connection of Fiber Reflection Mach-Zehnder Interferometer and Sagnac filter or of hybrid filter and Fiber Reflection Mach-Zehnder Interferometer. The simulation shows that the continuous tunable range of 50nm can be obtained and that more stable single mode operation of ring laser can be expected due to narrow FWHM. of filter spectrum.

• 대한기계학회논문집
• /
• 제12권3호
• /
• pp.440-449
• /
• 1988

본 연구에서는 미소한 진동진폭의 정밀한 측정을 위해 비교적 광선정렬(opti- cal alignment)이 쉽고 광손실이 적으며 국소부위의 진동측정이 가능한 다중반사계를 Michelson간섭계에 도입하였다.미소 진동진폭의 정밀한 값을 결정하기 위해서는 간 섭신호를 측정하여 간섭무늬 보간법과 곡선 맞춤법을 이용하는 방법이 있다. 전자는 간단한 계산과 시간을 절약할 수 있는 반면 후자는 복잡한 계산으로 인해 많은 시간이 소요된다. 그러나 정밀계측장비의 교정에서와 같이 경우에 따라서는 많은 시간과 노 력이 소요되더라도 정밀한 측정결과를 얻어야할 필요가 있기 때문에 이들 두가지 방법 의 정밀도를 확인하기 위해 컴퓨터에 의한 모의실험을 수행하였다.

• Journal of the Optical Society of Korea
• /
• 제4권1호
• /
• pp.7-10
• /
• 2000

The soft x-ray(10nm-100nm) interferometer is a modified Mach-Zehnder type interferometer and it consists of two beam-splitters and four totally reflecting mirrors. The beam-splitters used here are 50% transmission and 50% reflection grating type. The diffraction patterns of beam splitters(1st B.S.) were investigated with a He-Ne laser. The diffraction patterns produced by the soft x-ray interferometer (2nd B.S.) were also investigated in intensities positions. The diffraction patterns of 20 degree grazing incidence on the beam splitters(1st B.S.) show a circular array of spots. Both the reflected and the transmitted beams show the same patterns but symmetric circles on the screen. The maximum intensity appears roughly when n is in the zeroth and odd orders and the suppressed peak(missing order) appears when n is in even orders. Intensities of 3 center fringes(n = 0, $\pm$1) are stronger than others. These results confirm the reduced grating equation and make agree with the intensity distribution function. It was found that the final patterns produced by the soft x-ray interferometer (2nd B.S.) consisted of fine fringes which were caused by two of three diffraction beams that were arrived at the second beam-splitter.

• 한국광학회지
• /
• 제17권4호
• /
• pp.335-341
• /
• 2006

마이켈슨 간섭계 시스템에 두 개의 Convex Lens를 추가함으로서 평면파 참조광을 유지 시키며, 물체에 조사되는 물체광의 조사면적을 증대시킬 수 있는 변형된 마이켈슨 간섭계를 제작하였다. 변형된 마이켈슨 간섭계를 반사형 디지털 홀로그래피 현미경 시스템(Digital Holography Microscope System)에 적용한 결과 두 개의 Convex Lens를 추가하지 않은 고전 마이켈슨 간섭계를 사용한 디지털 홀로그래피 현미경 시스템 보다 넓은 영역에 대해 물체를 기록 할 수 있으며 또한 보다 넓은 영역을 재생 할 수가 있다.

• 비파괴검사학회지
• /
• 제35권2호
• /
• pp.141-149
• /
• 2015

전자제품에 필수적으로 사용되는 전자회로의 제작 시, 반도체 위에 증착하는 박막의 산화를 방지하기 위하여 molybdenum을 증착한다. Molybdenum 박막 증착 시 표면의 particle 또는 dust의 존재는 밀착력 감소 및 성능 저하, 수명 단축, 안전도 저하를 유발한다. 본 논문에서는 particle의 유무에 따른 molybdenum 박막 증착부의 변화를 보기 위하여, 두 가지 glass substrate를 대상으로 손상 측정 실험을 하였다. Sputtering 증착 기법으로 molybdenum이 glass substrate에 직접 코팅이 되는 clean과 dirty 두 종류의 molybdenum 박막을 제작하고, 손상 측정을 위해 반사형 디지털 홀로그래피를 구성하였다. 반사형 디지털 홀로그래피는 간섭계의 구성이 손쉽고 다양한 배율렌즈를 적용하여 측정영역에 다양성을 줄 수 있으며, 측정시간이 타 기법에 비해 짧다는 장점을 가진다. 실험 결과로부터 반사형 디지털 홀로그래피가 박막의 손상 및 결함 측정에 유용한 기술임을 확인하였다.

• Journal of the Optical Society of Korea
• /
• 제20권1호
• /
• pp.78-87
• /
• 2016

Red blood cells (RBCs) are customarily adhered to a bio-functionalised substrate to make them stationary in interferometric phase-imaging modalities. This can make them susceptible to receive alterations in innate morphology due to their own weight. Optical tweezers (OTs) often driven by Gaussian profile of a laser beam is an alternative modality to overcome contact-induced perturbation but at the same time a steeply focused laser beam might cause photo-damage. In order to address both the photo-damage and substrate adherence induced perturbations, we were motivated to stabilize the RBC in OTs by utilizing a laser beam of ‘arbitrary intensity profile’ generated by a source having cavity imperfections per se. Thus the immobilized RBC was investigated for phase-imaging with sinusoidal interferograms generated by a compact and robust Michelson interferometer which was designed from a cubic beam splitter having one surface coated with reflective material and another adjacent coplanar surface aligned against a mirror. Reflected interferograms from bilayers membrane of a trapped RBC were recorded and analyzed. Our phase-imaging set-up is limited to work in reflection configuration only because of the availability of an upright microscope. Due to RBC’s membrane being poorly reflective for visible wavelengths, quantitative information in the signal is weak and therefore, the quality of experimental results is limited in comparison to results obtained in transmission mode by various holographic techniques reported elsewhere.

• 전자공학회논문지A
• /
• 제33A권10호
• /
• pp.160-167
• /
• 1996

A new pathlength deviation detection technique which is composed of michelson interferometer is described and verified experimentally. The technique uses a sub-threshold biased visible laser diode of 20$\mu$m coherence length as a low-coherent light source. And for zeroth-order fringe(which is the largest among fringes) identification we used a piezoelectric transducer with a large modulation smplitude, which enables without the need of constant velocity scanning, to distinguish reflection surfaces separated by more than 10$\mu$m with a resolution of less than half-wavelength.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1936-1938
• /
• 2002

A tunable fiber laser and the Quadrature Sampling technique are used to construct highly sensitive fiber-optic distributive Bragg grating strain sensor system. By using a wavelength-modulated fiber laser, the variations of strain-dependent Bragg wavelengths are transformed into the variations of time-domain reflection profiles. The locations of profile peaks that correspond to the applied strains are demodulated using a precise wavelength encoder that uses a fiber-optic Mach-Zehnder interferometer and Quadrature Sampling technique. With the extremely high sensitive optical encoder, we could obtain not only high sensitivity, but also very linear responses that was impossible with the conventional techniques. This paper is attempted to report the theoretical and experimental results.

• 대한기계학회논문집A
• /
• 제20권10호
• /
• pp.3211-3223
• /
• 1996

In this paper, the propagation of elastic wave generated by loading impact to plates made of isotropic of anisotropic material was studied. And the influence of boundary conditions (free or clamped edge) upon the reflection of elastic wave was anlyzed. Also, double exposure holographic interferometer using ruby pulse laser was formed in order to investigate transient waves. Before the elasitc wave was reflected from the edges, the elastic wave of isotropic plate such as aluminum plate showed circular interferometric fringe pattern, whereas that of anisotropic plate such as epoxy composite laminates showed elliptical one. And the transverse displacement curves obtained from experiment and theory for both plates agreed well. Also, the waves reflected from the boundary edges showed much differences according to the boundary condition of edges.