• 한국자원리싸이클링학회:학술대회논문집
• /
• 한국자원리싸이클링학회 1999년도 제6회 산화철국제워크샵 DIGESTS OF THE INTERNATIONAL WORKSHOP ON IRON OXIDES
• /
• pp.1-63
• /
• 1999

Generation of abnormally large grains in the microstructure of small grains has been investigated on some ferrites. Some fractions of large grains were observed in the microstructure of sintered ZnFe$_2$O$_4$, Mn-ZnFe$_2$O$_4$, Fe$_3$O$_4$(in N$_2$) and MnFe$_2$O$_4$(in air). On the other hand, the large grains were not observed in NiFe$_2$O$_4$ and CoFe$_2$O$_4$, independent of calcining and sintering conditions. The large grains seem to be generated in such ferrites that are easy to vary their compositions or valencies at high temperatures. As the sintering proceeded, the number of large grains was increasing to form a continuous structure consisting of large grains, while the size of large grains did not increase remarkably. In addition, the growth of small grains was also very slow during the generation of the large grains. The large grains appeared to be suddenly generated after some induction periods. Avrami equation could be applied to the relation between net volume of large grains and sintering time. Thus, the grain boundaries may be strongly stabilized when the large grains are generated. The large grain in generated by the local activation of the stabilized grain boundaries, which is caused by the variation of compositions or valencies during sintering. It is concluded that the essence of the abnormal grain growth is not the generation of abnormally large grains, but the abnormal stabilization and the local activation of the grain boundaries.

• 한국작물학회지
• /
• 제29권2호
• /
• pp.109-113
• /
• 1984

우리나라 벼 재배품종들의 천립중을 증대시켜 단위면적당 수량능력의 향상을 위한 기초자료를 얻고자 수집된 몇가지 대립종들의 수량성 및 주요특성을 소개하고자 시험한 결과 1. 벼알의 무게와 벼알의 길이, 너비, 두께는 유의한 정(+)의 상관을 보였으며 벼 알의 길이와 모양은 정(+)의 상관(r=0.5707 ${\ast}\;{\ast}$)을 보였다. 2. 우러나라 재배품종의 천립중보다 무거온 14대립종들의 천립중과 수당입수, 주당수수, 등숙비율, 총건물중, 정조중, 수확지수간에는 부(-)의 상관을 보였으나 유의성은 인정되지 않았다. 3. 이들 대립종의 천립중과 생육일수와는 부(-)의 상관을 보였으나 유의성은 인정되지 않았다. 4. 천립중이 상이한 20품종의 천립중과 심복백정도간에는 정(+)의 높은 유의 상관(r =0.8477${\ast}\;{\ast}$)이 인정되었다.

• 자원리싸이클링
• /
• 제9권5호
• /
• pp.16-21
• /
• 2000

Generation of abnormally large grains in the microstructure of small grains has been investigated on some ferrites. Some fractions of large grains were observed in the microstructue of sintered ZnFe$_2$O$_4$, Mn-ZnFe$_2$O$_4$, Fe$_3$O$_4$(in $N_2$) and MnFe$_2$O$_4$(in air). On the other hand, the large grains were not observed in $NiFe_2$$O_4$ and $CoFe_2$$O_4$, independent of calcining and sintering conditions. The large grains seem to be generated in such ferrites that are easy to very their compositions or valencies at high temperatures. as the sintering proceeded, the number of large grains was increasing to from a continuous structure consisting of large grains, while the size of large grains did not increase remarkably. In addition, the growth of small grains was also very slow during the generation of the large grains. The large grains appeared be suddenly generated after some induction periods. Avrami equation could be applied to the relation between net volume of large grains and sintering time. Thus, the grain boundaries may be strongly stabilized when the large grains are generated. The large grain is generated y the local activation of the stabilized rain boundaries, which is caused by the variation of composition or valencies during sintering. It is concluded that the essence of the abnormal gain growth is not the generation of abnormally large grains, but the abnormal stabilization and the local activation of he grain boundaries.

• Progress in Superconductivity
• /
• 제5권2호
• /
• pp.114-117
• /
• 2004

We fabricated large single grain YBa$_2$Cu$_3$O$_{x}$ (Y-123) superconductors. The single grain Y-123 was grown by top seeded melt growth (TSMG) method. In a conventional box furnace with uniform temperature distribution, it was very difficult to grow large single grain Y-123 superconductors due to the size limitation in growth. To overcome the size limitation, we applied a radial thermal gradient (lower temperature at sample center and higher temperature on the sample edge) to the TSMG process. In this case, large single grain Y-123 could be easily grown. This is attributed that the liquid of the sample edge was maintained at the high temperature compared to the growth front. Using this method, we successfully fabricated a large single grain Y-123 of 6.4 cm X6.4 cm

• 농업과학연구
• /
• 제16권2호
• /
• pp.138-151
• /
• 1989

In order to find the effects of seed size on the early seedling growth and yield of soybean, three soybean cultivars in Korea were investigated. Seed size was classified into large and small according to the weight and planted in pots(1/5000a) and in the field. Three soybean cultivars respresenting large, medium and small grains were Hwangkeum-kong, Kwangkyo and Bangsa-kong respectively. These cultivars were planted on June 20, 1987. 1. The plant height, stem diameter, root length and leaf area index(LAI) of the seed with large size seemed larger than the seed with small size regardless of cultivars. 2. The fresh and dry weight were different depending upon the grain sizes. The large grain had heavier fresh and dry weight than the small grains. 3. The protein consumption rate of the cotyledon of Bangsa-kong with small grain size was faster than the Hwangkeum-kong with large grain size. 4. The stem length, stem diameter and number of main stem node of the seed with large size seemed larger than the seed with small size. Large grains of Hwangkeum-kong were the highest in the number of branch node and number of node. 5. The number of pods and grains per plant of Bangsa-kong with small grain size was larger than the Kwangkyo with large grain size. 6. The yield per 10a for Hwangkeum-kong, Hwangkyo and Bangsa-kong were 226.3kg, 193.0kg and 192.8kg, respectively and they were all statistically different. The yield increases of large grains over small grains in the Hwangkeum-kong, Kwangkyo, and Bangsa-kong were 7.4%, 8.0% and 9.2%, respectively.

• 대한금속재료학회지
• /
• 제48권9호
• /
• pp.847-855
• /
• 2010

The grain size of a cross-section of $8{\mu}m$-thick copper film was determined by electron backscatter diffraction analysis. Grain size distribution histogram showed the presence of a large fraction of small-sized grains, and the mean grain size was significantly affected by handling of them. A cut-off grain size, below which all grains are ignored as noise and eliminated for the calculation of the mean value, should be three or four times as large as the step size. Due to the presence of small grains, the linear intercept method derived larger mean grain size, which depends less sensitively on the cut-off grain size than the equivalent circle diameter method.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.430-430
• /
• 2010

MICC 방법으로 제작된 TFT는 large grain과 그에 따른 grain boundary의 감소로 인하여여, 소자의 전기적 특성을 좋게 할 수 있다. 본 연구에서는 bi-layer channel의 large grain size TFT를 제작하여 소자의 전기적 특성을 비교하였다. Channel의 width / length의 크기는 각 각의 경우 $7/5{\times}2$, $10/5{\times}2$, $15/5{\times}2$ (${\mu}m$)로 하였다. 소자의 성능 측정 결과 Field-effect mobility의 경우에는 channel width가 증가할 수록 감소하는 경향성을 나타내었으며, Threshold voltage의 경우에는 조금 감소하는 경향성은 있었으나 변화의 폭이 매우 작았다. Output characteristics 의 경우에는 모든 set에서 좋은 saturation 특성을 보였다. 이것은 current croding이 없었다는 것을 의미하는데, 큰 grain size로 인한 효과로 해석 할 수 있다. 본 연구에서는 bi-layer channel에서 corner effect에 중점을 두어 소자의 전기적 특성 변화에 대하여 논하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.367-367
• /
• 2010

Electrical characteristics of Large-grain silicon with Ni-induced crystallization which gate insulator is made of 80 nm $SiO_2$ and 20 nm SiNx was fabricated and measured with different channel widths, channel length fixed $10{\mu}m$. Focusing on the changes of channel widths from $4{\mu}m$ to $40{\mu}m$. Field-effect mobility decreased from 111.30 to $94.10\;cm^2/V_s$ when the channel widths increased. Still threshold voltage was almost similar with -1.06V.

• 한국세라믹학회지
• /
• 제30권5호
• /
• pp.365-372
• /
• 1993

Variation of dielectric constant in PMN-Pyrochlore diphasic mixtures were investigated with grain size of pyrochlore phase. Size of pyrochlore phase was controlled by the numbers of calcining and sedimentation method during powder processing. When grain size of pyrochlore phase is large in the sintered specimen, dielectric constant slowly decreased with increase of amount of pyrochlore phase. On the contary, grain size of pyrochlore phase is small, dielectric constant drastically decreased. It was thought that small sized pyrochlore grains more easily surrounded high dielectric phase (perovskite PMN) than large ones with addition of pyrochlore phase.

• Journal of Advanced Marine Engineering and Technology
• /
• 제26권1호
• /
• pp.76-82
• /
• 2002

In this study, the rotary bending fatigue test was carried out with low carbon steel(SM25C). The specimens were heat-treated in order to change the grain size, and investigated items are fatigue limit, small crack initiation, fatigue crack propagation behavior and possibility of fatigue life prediction according to the different grain size. The summarized result are as follows ; Fatigue limit of the smooth specimen was dependent upon the grain size. The fatigue crack initiation of the small grain size specimen was delayed more than that of the large grain size specimen. And the small cracks of small grain size specimen were distributed in the narrow region of the main crack circumference contrary to the large grain size specimen. The main crack was grown along the grain boundary having co-alliance with small cracks. The experiment material has quantitatively disclosed the possibility of fatigue life prediction because the fatigue crack propagation behavior is dependent upon the grain size.