• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2004년도 추계학술발표대회 개요집
• /
• pp.150-152
• /
• 2004

This study was aimed at evaluation of residual stress of steel pipe structures. The production process of pipes was complex (at first bending was done by roll forming or press forming and welding was final process of making of steel pipes). So there could be effected high residual stresses in steel pipes. In order to evaluate the changes of residual stress the locations of measurement were selected carefully. Measurements of residual stress were done for various kinds of pipes (shapes in circular and square). For the evaluation of residual stress, hole-drilling method (ASTM E837 was applied. The results showed that along the weld Eine high tensile stress were measured as effected, and high tensile stresses were measured where large plastic deformation developed. Through these efforts, experimental results could be more effectively assisted by numerical method.

• 대한기관식도과학회:학술대회논문집
• /
• 대한기관식도과학회 1981년도 제15차 학술대회연제순서 및 초록
• /
• pp.5.2-5
• /
• 1981

후두의 Anterior glottic web에 대한 수술적 치료방법은 1924년 Haslinger가 처음으로 Web의 성공적인 Correction예를 보고한 이래 1935년 Iglauer, 1950년 Mc Naught, 1969년 Pennington, 1970년 Montgomery등이 각기 다른 치료법을 소개하였으나 그 치료목적이 전연합부의 상피화와 동시에 Denuded Vocal Cord에 형성되는 유착을 방지하는 데에 있었다. 저자등은 최근 후두유두종 3례에서 2∼3회의 제거술후에 유발된 Anterior glottic web를 경험하여 Stainless Steel Plate를 이용한 Keel을 제작하여 사용한 결과 만족할 만한 결과를 얻었기에 문헌적 고찰을 가하여 보고하는 바이다.

• Journal of Welding and Joining
• /
• 제17권1호
• /
• pp.97-103
• /
• 1999

Ships, structures on the ocean, bridges, and other structures tend to be large by the development of industry. These ultra thick plate were welded with large heat input, which causes welding stresses, deformation and buckling, so it has to be considered the weld design, safety, reliability. The welded residual stresses were produced and redistributed due to the effect of large heat input. The mechanical phenomenon has not been surely identified yet. In spite of the lack of the study on the box column, there are various types of steel frame such as I type, H type, + type and $\bigcirc$ type, used in high story building. In this study, we performed computer simulation with two dimensional heat conduction and plane deformation thermal elasto-plastic finite element computer program as changing the plate thickness to 100mm, 150mm and groove angle to $60^{\circ}C$, $45^{\circ}C$, $30^{\circ}C$ of corner joint in box column. And then, to identify mechanical phenomenon such as the phenomenon of thermal distribution, welding residual stresses and deformation and to decide optimum groove angle and welding condition. The main conclusion can be summarized as follows: 1) Since the groove angle has became cooling down rapidly due to its smaller value, the temperature slope was steeped somewhat. 2) The tensile stress within the welding direction stresses was somewhat decreased at the weld metal and HAZ, increasing of the groove angle. 3) The local stress concentration of the groove angle $60^{\circ}C$ was appeared smaller than groove angle $30^{\circ}$.

• 한국강구조학회 논문집
• /
• 제24권4호
• /
• pp.451-458
• /
• 2012

구조적 우수성이 입증된 콘크리트 충전 강관 (CFT) 시스템은 폭두께비가 큰 강관을 사용할 때 더욱 경제적인 설계가 될 수 있다. 하지만, 현재 국내외의 규준에서는 CFT에 사용할 수 있는 강관의 폭두께비를 제한하고 있어 건설 재료를 보다 더 효율적으로 활용할 수 있는 가능성을 미리 차단하고 있다. 본 연구에서는 폭두께비 60, 70, 80, 90, 100를 갖는 각형 단주 CFT에 대해 압축실험을 실시하여 CFT에서의 좌굴 후 내력을 확인하였고 기존의 규준에서 제시한 폭두께비 제한치를 완화한 식을 제시하였다.

• 한국공간구조학회논문집
• /
• 제18권3호
• /
• pp.57-66
• /
• 2018

Recently various composite beams in which concrete is filled in the U-shaped steel plate have been developed for saving story height and reducing construction period. Due to the high flexural stiffness and strength, they are widely being used for the building with large loads and long spans. The semi-slim AU composite beam has proven to take highly improved stability compared to the existing composite beams, because it consists of the closed steel section by attaching cap-type shear connectors to the upper side of U-shaped steel plate. In this study the finite element analyses were performed to evaluate the safety of the AU composite beam with unconsolidated concrete which were sustained through the closed steel section during the construction phase. The analyses were performed on the two types of cross section applied to the fabrication of AU composite beams, and the results were compared to the those of 2-point bending tests. In addition, the flexural performance according to the space of intermittent cap-type shear connectors and the location of reinforcing steel bars for compression was comparatively investigated. Through the results of analytical studies, it is preferable to adopt the yield moment of AU composite beam for evaluating the safety in the construction phase, and to limit the space of intermittent shear connectors to 400 mm or less for the construction load.

• 한국초전도ㆍ저온공학회논문지
• /
• 제11권4호
• /
• pp.8-11
• /
• 2009

This study introduced wastewater treatment method by High Gradient Magnetic Separation (HGMS). HGMS treatment was high efficient method for various industrial wastewaters. The system is currently research state, but we have surveyed commercialize the technology for industry. In rolling plate process, coolant wastewater was recycled by sedimentation and sand filter system. It needs several large reservoirs and long time to remove suspended solid (SS) like metal fines and iron oxide in hot rolling plate making process. If removing rate of suspended solid in rolling coolant wastewater is improved by using HGMS system, the productivity of working process can be increased and the area of reservoir can be reduced. We manufactured high temperature superconducting HGMS system that had a purpose to treatment of coolant wastewater in rolling plate process. We fabricated the prototypes of magnetic matrix filter consisting of stainless steel 430 mesh, which is a core component in the magnetic separation system, In our basic preliminary experiment using HGMS system, it has been clear that the fine paramagnetic particles in the coolant wastewater obtained from rolling plate process of POSCO can be separated with high efficiency.

• 한국기계가공학회지
• /
• 제18권5호
• /
• pp.9-16
• /
• 2019

Recent economic trends are worsening and becoming longer, and Korean shipbuilding is focused on high value added and high technology, especially for LNG carriers and large container ships. Both ship types increased in size in the 2010s but have requirements such as high strength, toughness at low temperatures and continuous weldability for preventing brittle fractures at service temperatures. In particular, as container ships become larger, the International Classification Society (IACS) has established a provision (IACS UR S33) that mandates the use of BCA (Brittle Crack Arrest) certified vessels for large container vessels contracted after 2014 to ensure safety. Therefore, studies on BCA 47Y.P are currently being undertaken, but BCA 40Y.P has not been actively studied yet. We will test BCA 40Y.P to verify why it can be applied to a large container ship and measure fatigue cracking.

• Steel and Composite Structures
• /
• 제12권5호
• /
• pp.379-393
• /
• 2012

Many steel bridge infrastructures in the world are getting older, and a large number of these structures are in need of maintenance, rehabilitation or replacement. Most of them are subjected to corrosion due to exposure to aggressive environmental conditions and inadequate maintenance, causing reduction of their carrying capacities. In order to have an adequate bridge management, it is of paramount importance to develop an efficient, accurate and rapid condition assessment method which can be used to make reliable decisions affecting the cost and safety. Therefore, a simple and accurate method of calculating remaining yield and tensile strength by using a concept of representative effective thickness with correlation of initial thickness and maximum corroded depth is proposed in this study, based on the results of many tensile coupon tests of corroded plates obtained from a steel plate girder with severe corrosion, used for about 100 years. Furthermore, a strength reduction diagram which will be very useful for bridge inspection engineers to make rational decisions about the maintenance management of aged steel bridge infrastructures is presented.

• 한국건축시공학회지
• /
• 제14권1호
• /
• pp.1-10
• /
• 2014

The SC structure can have relatively liberal sectional surfaces, and allows modularization for pre-forming in factories and structural stability. It can be used for the shear walls in the core of general buildings or the structural members for parking buildings. In the future, it could be applied to moving large bus terminals, and widely used for general industrial structures as it can expedite the process compared to other methods. This study examined the applicability of SC structures to the retaining walls of a parking building and reviewed its economic value by comparing its construction term, quality control benefits, and cost compared to RC structures. It was found that SC structures are about 1.6-1.7 times more expensive than RC structures in terms of the cost of fabrication and installation. However, the construction term can be reduced by 27% to save indirect costs for constructors, as well as the cost of removing molds and material loss required when installing RC structures.

• 한국강구조학회 논문집
• /
• 제11권1호통권38호
• /
• pp.55-67
• /
• 1999

복합재료로 구성된 복합적층판 및 쉘과 같은 구조물은 탄성계수와 전단탄성 계수의 비가 매우 커서 전단변형의 영향이 크므로 정확한 해를 얻기 위하여 해석 및 설계에서 필수적으로 전단변형을 고려해야 하며, 고차의 전단변형이론에 의한 해석은 더욱 정확한 해를 얻을 수 있다. 본 연구는 단순지지 경계조건을 갖는 복합적층판 및 쉘에 대하여 3차 전단변형 이론을 적용하여 플라이 각도, 층의 수에 따른 복합적층판 및 쉘의 휨, 진동, 좌굴 특성을 연구한다.