• Journal of the Microelectronics and Packaging Society
• /
• v.24 no.4
• /
• pp.39-46
• /
• 2017

This paper presents the fabrication of ceramic insulation layer on metallic heat spreading substrate, i.e. an insulated metal substrate, for planar type heater. Aluminum alloy substrate is preferred as a heat spreading panel due to its high thermal conductivity, machinability and the light weight for the planar type heater which is used at the thermal treatment process of semiconductor device and display component manufacturing. An insulating layer made of ceramic dielectric film that is stable at high temperature has to be coated on the metallic substrate to form a heating element circuit. Two technical issues are raised at the forming of ceramic insulation layer on the metallic substrate; one is delamination and crack between metal and ceramic interface due to their large differences in thermal expansion coefficient, and the other is electrical breakdown due to intrinsic weakness in dielectric or structural defects. In this work, to overcome those problem, selected metal oxide buffer layers were introduced between metal and ceramic layer for mechanical matching, enhancing the adhesion strength, and multi-coating method was applied to improve the film quality and the dielectric breakdown property.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.137-137
• /
• 2009

Thin-film transistors (TFTs) that can be prepared at low temperatures have attracted much attention due to the great potential for flexible electronics. One of the mainstreams in this field is the use of organic semiconductors such as pentacene. But device performance of the organic TFTs is still limited by low field effect mobility or rapidly degraded after exposing to air in many cases. Another approach is amorphous oxide semiconductors. Amorphous oxide semiconductors (AOSs) have exactly attracted considerable attention because AOSs were fabricated at room temperature and used lots of application such as flexible display, electronic paper, large solar cells. Among the various AOSs, a-IGZO was considerable material because it has high mobility and uniform surface and good transparent. The high mobility is attributed to the result of the overlap of spherical s-orbital of the heavy pest-transition metal cations. This study is demonstrated the effect of thickness channel layer from 30nm to 200nm. when the thickness was increased, turn on voltage and subthreshold swing were decreased. a-IGZO TFTs have used a shadow mask to deposit channel and source/drain(S/D). a-IGZO were deposited on SiO2 wafer by rf magnetron sputtering. using power is 150W, working pressure is 3m Torr, and an O2/Ar(2/28 SCCM) atmosphere at room temperature. The electrodes were formed with Electron-beam evaporated Ti(30nm) and Au(70nm) structure. Finally, Al(150nm) as a gate metal was evaporated. TFT devices were heat treated in a furnace at $250^{\circ}C$ in nitrogen atmosphere for an hour. The electrical properties of the TFTs were measured using a probe-station to measure I-V characteristic. TFT whose thickness was 150nm exhibits a good subthreshold swing(S) of 0.72 V/decade and high on-off ratio of 1E+08. Field effect mobility, saturation effect mobility, and threshold voltage were evaluated 7.2, 5.8, 8V respectively.

• Journal of Korea Spatial Information System Society
• /
• v.7 no.1 s.13
• /
• pp.25-37
• /
• 2005

Recently, with the development of wireless communications and mobile computing, interest about mobile computing is rising. Mobile computing can be regarded as an environment where a user carries mobile devices, such as a PDA or a notebook, and shares resources with a server computer via wireless communications. A mobile database refers to a database which is used in these mobile devices. The mobile database can be used in the fields of insurance business, banking business, medical treatment, and so on. Especially, LBS(Location Based Service) which utilizes location information of users becomes an essential field of mobile computing. In order to support LBS in the mobile environment, there must be an Embedded Spatial MMDBMS(Main-Memory Database Management System) that can efficiently manage large spatial data in spatial mobile devices. Therefore, in this paper, we designed and implemented the Embedded Spatial MMDBMS, extended from the HSQLDB which is an existing MMDBMS for PC, to manage spatial data efficiently in spatial mobile devices. The Embedded Spatial MMDBMS adopted the spatial data model proposed by ISO(International Organization for Standardization), provided the arithmetic coding method that is suitable for spatial data, and supported the efficient spatial index which uses the MBR compression and hashing method suitable for spatial mobile devices. In addition, the system offered the spatial data display capability in low-performance processors of spatial mobile devices and supported the data caching and synchronization capability for performance improvement of spatial data import/export between the Embedded Spatial MMDBMS and the GIS server.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.648-653
• /
• 2008

With development of mobile communications terminal and expansion of mobile Internet, a large number of users can use mobile web contents at anytime and anywhere and will demand service of greater contents. Due to such demand, many studies are being carried out on transcoding contents so that wired web contents can be used in mobile web. However, transcoding and creation of mobile web contents involve difficulties because specifications available from telecommunications companies and mobile terminals have not been standardized. Especially, in order for serving dynamic object of wired web page contents to dynamically change according to time or user, it is required not only to program scripts to suit each terminal, but also to transcode the resources used in advance. For solution to this problem, this study uses the hierarchy structure of DOM (document object model) to display structural characteristics of wired web page. In other words, this study proposes the following technique Wired web pages are analyzed and the results are established as data structure. Then, dynamic object is extracted and the domain is indexed so that, when serving mobile web page, information can be extracted at the indexed position to create mobile web contents for service on real-time basis.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.2
• /
• pp.218-231
• /
• 1999

Pyramidal cells in the hippocampal CA area were recorded from and filled with neurobiotin in anesthetized rats. The extent of their dendrites and the electropharmacological properties of membrane as well as the effect before and after neurobiotin injection were examined. Pyramidal cells had a high resting membrane potential, a low input resistance, and a large amplitude action potential. A afterhyperpolarization was followed a single action potential. Most pyramidal cells did not display a spontaneous firing. Pyramidal cell displayed weak inward rectification and anodal break excitation in response to negative current injection into the cell. Membrane properties of recorded neurons before and after neurobiotin injection with consecutive current injection were compared. Some properties were significantly increased after labelling(P>0.05); the duration and amplitude of sustained AHP, input resistance, and the number of action potentials for simultaneous intra- and extracellular stimulations. Neurobiotin-filled neurons showed pyramidal morphology. Cells were generally bipolar dendrite processes ramifying in stratum lacunosum-moleculare, radiatum, and oriens.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.199-199
• /
• 2016

Commercially pure titanium (cp-Ti) and Ti alloys (typically Ti-6Al-4V) display excellent corrosion resistance and biocompatibility. Although the chemical composition and topography are considered important, the mechanical properties of the material and the loading conditions in the host have, conventionally. Ti and its alloys are not bioactive. Therefore, they do not chemically bond to the bone, whereas they physically bond with bone tissue. The electrochemical deposition process provides an effective surface for biocompatibility because large surface area can be served to cell proliferation. Electrochemical deposition method is an attractive technique for the deposition of hydroxyapatite (HAp). However, the adhesions of these coatings to the Ti surface needs to be improved for clinical used. Plasma electrolyte oxidation (PEO) enables control in the chemical com position, porous structure, and thickness of the $TiO_2$ layer on Ti surface. In addition, previous studies h ave concluded that the presence of $Ca^{+2}$ and ${PO_4}^{3-}$ ion coating on porous $TiO_2$ surface induced adhesion strength between HAp and Ti surface during electrochemical deposition. Silicon (Si) in particular has been found to be essential for normal bone and cartilage growth and development. Zinc (Zn) plays very important roles in bone formation and immune system regulation, and is also the most abundant trace element in bone. The objective of this work was to study electrochemical characteristcs of Zn and Si coating on Ti-6Al-4V by PEO treatment. The coating process involves two steps: 1) formation of porous $TiO_2$ on Ti-6Al-4V at high potential. A pulsed DC power supply was employed. 2) Electrochemical tests were carried out using potentiodynamic and AC impedance methoeds. The morphology, the chemical composition, and the micro-structure an alysis of the sample were examined using FE-SEM, EDS, and XRD. The enhancements of the HAp forming ability arise from $Si/Zn-TiO_2$ surface, which has formed the reduction of the Si/Zn ions. The promising results successfully demonstrate the immense potential of $Si/Zn-TiO_2$ coatings in dental and biomaterials applications.

• Korean Journal of Cognitive Science
• /
• v.17 no.4
• /
• pp.337-356
• /
• 2006

This research was conducted to see the impact of brightness, polarity, and hue diference on legibility and emotional effcts of the word. In the experiment 1, stimuli with three levels of brightness difference and two-typed polarity were used. The results showed that legibility, aesthetics, and preference increased with increasing brightness difference. In the experiment 2, the same stimuli if experiment 1 included four hues: red, green, blue, yellow. As a result, the effects of brightness and polarity and the interaction effect of brightness and polarity on legibility were significant. Also, the effects of brightness, polarity, and hue and the interaction effect of brightness and hue on aesthetics and preference were significant. These results showed that legibility, aesthetics, and preference increased with increasing brightness difference of word and background and positive polarity was better than negative. Aesthetics and preference rating increased according to the following order: red, blue, green, yellow. In addition, the interaction effect of brightness and polarity on legibility was because reaction time of negative polarity was longer than positive at the small brightness difference condition. The interaction effect of brightness and hue on aesthetics and preference ws because the aesthetics rating of hue at the large brightness difference condition had significant difference compared with small brightness difference. In the experiment 3, participants rated text designs and simple color stimuli with 18 emotional adjectives to see the similarity of their emotion. The conclusion was that to reflect the subjective feelings of a rotor on the text design, it would be appropriate to use the rotor on background of the text design.

• Korean Security Journal
• /
• no.25
• /
• pp.147-164
• /
• 2010

A variety of work zone including road single-sharing construction add surrounding disorder and increase inconvenience of vehicles and pedestrians and furthermore danger of traffic accidents, which sometimes result in human life damages. Traffic delay due to vehicles and users generating in the course of using large-scale multiplex facilities bring about a great economic loss. Now, a lot of regulations and laws related to traffic safety system on construction sites etc. are established, but can not display efficacy desirably. It brings about continuous economic loss due to human life accidents and delay. For the purpose of solving the problems, it is necessary to import systems such as traffic inducement Security (Japan) and traffic controller (CANADA, USA) This article suggest how improve civil safety and reduce Social cost. therefore This thesis aims at analyzing advanced cases of foreign countries, looking into Korean status, and presenting importing ways of traffic inducement Security appropriate to Korea. It is reasonable to grant grade1, grade2, and technical experts to traffic inducement Security who pass regulated educations and examinations. In addition, by reversing regulations and laws, it is necessary only those who have the licenses of traffic induction guarder etc. can establish construction sites and disordered places on roads. Theory educations for education time must include basic educations and expert educations. Basic educations must include understanding regulations and laws and understanding affairs. Expert educations must include traffic control, safety educations, understanding of traffic accidents, operation of traffic control facilities, and traffic accident settlements. Traffic affairs educations must include traffic induction affairs in sites (hand signals, safety material establishment, traffic accident settlements, and urgent treatments).

• Journal of the Korean Society of Radiology
• /
• v.3 no.4
• /
• pp.13-21
• /
• 2009

The Magnetic Resonance Imaging (MRI) systems consist of various parameters. Among them, the image quality can be arguably the most important part of the systems. As the other components in MRI systems have been developed and evolved, the MRI image quality has been advanced remarkably. And, the radiation imaging system is being converted from the Film to the digital method, which drives the computerization of many hospitals. The management of the tremendous radiation images becomes more critical. The data compression is used to store such large data in a network server. When the image files are compressed, the image quality degrades comparing to its original images. Even slight quality degradation of a medical image could cause an erroneous diagnosis, so the images must be handled carefully. This thesis studied the image assessment methods of comparing the quality of the compressed image to its original, and the quality of the original and the displayed images of the MRI systems via PSNR with actual medical images used in hospitals. As a result, no noticeable quality degradation was found comparing the compressed images with various digital compression methods and the original images. However, it was a different story comparing the original images and the displayed images on MRI monitors. Some noise or image distortion was visible using any regular CRT or LCD monitors were used while the special monitors designed for the MRI imaging and medical images displayed high definition images.

• Journal of Microbiology and Biotechnology
• /
• v.13 no.3
• /
• pp.422-428
• /
• 2003

Umbilical cord blood (UCB), a rich source of hematopoietic stem/progenitor cells, has been proposed as an alternative to bone marrow and peripheral blood for transplantation treatment. Ex vivo expansion of cord blood stem cells could make the use of cord blood transplant feasible even for adult patients. However, the optimal cytokine cocktail for expansion of stem cells is yet to be established. This study compares proliferation, apoptosis, and telomerase activities in human cord blood stem cells cultured ex vivo with FLT3 ligand (FL)/thrombopoietin (TPO) or FL/TPO/stem cell factor (SCF), with a view to determine optimal combination of cytokines. CD34+ cells were cultured in DMEM containing either FL (50 ng/ml) and TPO (10 ng/ml) (FT group) or FL (50 ng/ml), TPO (10 ng/ml) and SCF (50 ng/ml) (FTS group). The cell proliferation rate was ten times higher in the FTS group. Although cells cultured with the two different combinations of cytokines were maintained for a long term (up to 8 weeks), a large number of cells underwent differentiation during this period. Cells cultured in FTS displayed lower levels of apoptosis compared to those of the FT group during the Initial 7 days of culture. The CD34+ fraction in both groups was markedly decreased to $21-30\%$ , and only $5-6\%$ was detected at 14 days of culture. Telomerase activity detected in human CD34+ cord blood at low levels was upregulated during the early phase of culture and decreased to baseline levels in the later phase. The telomerase activity of cord blood cultured in FT was lower than that of the FTS group. Our results suggest that, on adding stem cell factors to the FT cytokines, cultured CD34+ cord blood cells display a greater degree of cell proliferation and decreased apoptosis. However, during CD34+ cord blood cell culture, a Barge number of cells undergo differentiation, indicating that more potent novel cytokines or new culture conditioning methods should be developed to maintain their ability to engraft and sustain long-term hematopoiesis.