• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.802-807
• /
• 2003

International Convention Center Jeju(ICCJ) was planed and built for accommodating a variety of conventional and exhibitional activities. For a better flexibility of operation, almost all rooms in ICCJ are designed to be subdivided Into a couple of small rooms with installation of movable partition walls. Architectural and acoustical design should be deliberatively and cooperatively undertaken to cope with such a complex condition. Conference hall, the largest room in ICCJ, has a capacity of 5000 seats who:1 used as a whole. It could be divided into 3 halls, one with 2000 pre-installed seats on slanted floor, up/down removable stage and its settings above, and the other 2 flat rooms with no seats installed. A devided hall with pre-installed seats and stage is designed for a multi-use auditorium. Almost all surfaces except ceilings adjacent to the stage are sound absorptively treated, in regard to extensive use of sound reinforcement systems. Its reverberation time 1.65 sec without audience, which is roughly correspond to 1.50 sec with fully occupied audience. When there is a need for a larger room, all the partition wail Is removed and the hall could be used as a whole. Exhibition hall is located in the first floor of ICCJ. Absorption and softness are needed for the hat 1 because exhibition behavior has something noisy features. Perforated MDF panels with porous materials and air space in the back groundare adopted for the walls. There are one large, two medium, and several small convention rooms in ICJJ. The room are also acoustically designed for maximum flexibility with no defects soundwisely.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.1
• /
• pp.17-25
• /
• 2018

Recently, with the development of ICT technology and the rapid spread of smart devices, a huge amount of information is being generated. The recommendation system has helped the informant to judge the information from the information overload, and it has become a solution for the information provider to increase the profit of the company and the publicity effect of the company. Recommendation systems can be implemented in various approaches, but social information is presented as a way to improve performance. However, no research has been done to utilize trust cluster information among users in the recommendation system. In this paper, we propose a method to improve the performance of the recommendation system by using the influence between the intra-cluster objects and the information between the trustor-trustee in the cluster generated in the online review. Experiments using the proposed method and real data have confirmed that the prediction accuracy is improved than the existing methods.

• Journal of Communications and Networks
• /
• v.16 no.4
• /
• pp.407-414
• /
• 2014

The Internet is a highly distributed and complex system consisting of billion devices and has become the field of various kinds of conflicts during the last two decades. As a matter of fact, various actors utilise the Internet for illicit purposes, such as for performing distributed denial of service attacks (DDoS) and for spreading various types of aggressive malware. Despite the fact that numerous services provide information regarding the threat level of the Internet, they are mostly based on information acquired by their sensors or on offline statistical sampling of various security applications (antivirus software, intrusion detection systems, etc.). This paper introduces proactive threat observatory system (PROTOS), an open-source early warning system that does not require a commercial license and is capable of estimating the threat level across the Internet. The proposed system utilises both a global and a local approach, and is thus able to determine whether a specific host is under an imminent threat, as well as to provide an estimation of the malicious activity across the Internet. Apart from these obvious advantages, PROTOS supports a large-scale installation and can be extended even further to improve the effectiveness by incorporating prediction and forecasting techniques.

• Animal cells and systems
• /
• v.3 no.1
• /
• pp.29-39
• /
• 1999

Current data on reproductive characters of endemic and native species are essential to provide a strategy for the conservation of these species. Red pine (Pinus densiflora Sieb. & Zucc.) is one of the dominant, native tree species in Korea, but its reproductive ecology is not well-known. In 1997, the pattern of variation in cone and seed yields contributing to the conservation of declining populations of red pines was examined. Plant height and dbh were measured, and several new cones were collected from each tagged tree after counting the number of cones on each tree. For a subset of cones sampled, the number of fertile scales, the number of seeds at three development stages (early/late aborted, and filled seed), seed wing size, wing color, and individual filled seed mass were measured. The three sites which differed significantly in mean plant size also differed in mean cone and seed production per plant. However further analyses showed that most variation in characters examined occurred among plants within sites, but not among sites. An average of 90% of the potential seeds on the cones aborted at an early developmental stage, demonstrating that early abortion is a major factor affecting the number of filled seeds per cone. Individual seed mass was the only character which exhibited significant variations among sites as well as among trees within sites. Individual seed mass was overall negatively correlated with both the percentage of late abortion and the number of old cones per plant, suggesting that both the past and current years' reproductive activities have caused variations in seed mass. The potential dispersal distance of red pine seeds is quite large. However, wing loading was correlated with seed mass and number in a complex pattern across the sites. Distribution of seeds with varied colored wings differed among sites and among trees within sites. These results suggest that red pines at different sites might possess different strategies to cope with selection pressures acting during the final phase of reproduction, from seed dispersal to establishment. Then the ‘fitted’ red pine trees at each site should be identified and managed to conserve or restore populations.

• Korean Journal of Construction Engineering and Management
• /
• v.15 no.4
• /
• pp.49-57
• /
• 2014

Since the structure systems of construction projects have been forced to be large, high-rised, and complex, many researchers have been put their efforts to develop high strength concrete incorporating diverse advanced materials. In order to improve the performance of the concrete, the fibers leading high ductility to concrete have been used, consequently concrete columns adopting High-Performance Fiber Cement(HPFC) have been developed. This paper analyzed not only the construction work process of HPFC column installed to the real construction project, but also construction productivity of the columns by using discrete event simulation technique. As a result, several considerations on installing such a column have identified, compared with the works for typical concrete columns. In particular, there was specific characteristic to install the columns in terms of labor resource productivity, which is not shown with the work for the typical concrete columns.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.1
• /
• pp.191-200
• /
• 2000

The marine accident is being highlighted as a serious worldwide problem for the guard station of human safety and the protection of marine environment pollution. Especially, the GMDSS is operated as a international rule for the safety of a large scale ship, but the small size ship's management is required a adaptive national rule because of the complex condition of national circumstance. This study is motivated to develop a ship's position tracking system combined with GPS information for VTS and control the ship navigation, velocity and longitude etc.. In Part of Navigation Data Transmission is GPS data transmission whih ship's ID using microprocessor and TX speed translation for flexibility with 4800∼2400 [bps]. Results show that the our system for data transmission using microprocessor is useful tool in maritime transmission as SSB used the main TX method of small ship and has a cost competitive power. Therefore, we will expected cost and technical competitive power compared to AIS. But those systems are still remained the unsolved problem for protection from marine accident.. Finally, we examined the semi-actual receiving state on simulated sailing in the around sea of Mok-Po harbor.

• Journal of Communications and Networks
• /
• v.13 no.5
• /
• pp.481-493
• /
• 2011

Multiple-input multiple-output (MIMO) technology provides high data rate and enhanced quality of service for wireless communications. Since the benefits from MIMO result in a heavy computational load in detectors, the design of low-complexity suboptimum receivers is currently an active area of research. Lattice-reduction-aided detection (LRAD) has been shown to be an effective low-complexity method with near-maximum-likelihood performance. In this paper, we advocate the use of systolic array architectures for MIMO receivers, and in particular we exhibit one of them based on LRAD. The "Lenstra-Lenstra-Lov$\acute{a}$sz (LLL) lattice reduction algorithm" and the ensuing linear detections or successive spatial-interference cancellations can be located in the same array, which is considerably hardware-efficient. Since the conventional form of the LLL algorithm is not immediately suitable for parallel processing, two modified LLL algorithms are considered here for the systolic array. LLL algorithm with full-size reduction-LLL is one of the versions more suitable for parallel processing. Another variant is the all-swap lattice-reduction (ASLR) algorithm for complex-valued lattices, which processes all lattice basis vectors simultaneously within one iteration. Our novel systolic array can operate both algorithms with different external logic controls. In order to simplify the systolic array design, we replace the Lov$\acute{a}$sz condition in the definition of LLL-reduced lattice with the looser Siegel condition. Simulation results show that for LR-aided linear detections, the bit-error-rate performance is still maintained with this relaxation. Comparisons between the two algorithms in terms of bit-error-rate performance, and average field-programmable gate array processing time in the systolic array are made, which shows that ASLR is a better choice for a systolic architecture, especially for systems with a large number of antennas.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.3
• /
• pp.661-669
• /
• 2004

As a large number of distributed systems becoming more popular, interoperability, portability and security are becoming major concerns of modern computing. CORBA and object-oriented database which provide transparency of network and database are increasingly being used as the basis for distributed system to solve these problems. The two methods can help accomplish assurance of security by using a method-based access control technique or an attribute-based access control technique. These methods also enhance the unavailability or inefficiency caused by the delay of access process and bottleneck of the network due to the complex instance-based access control. We propose a security model on the type information based access control system that can enhance both security and availability by separating the functions delivered from CORBA and object-oriented databases. We apply the access control model specifically to enhancement of security system and also perform a test to verify the security and availability of our model.

• Journal of KIISE:Computing Practices and Letters
• /
• v.11 no.5
• /
• pp.458-463
• /
• 2005

The total asset management system is used for banks or financial institutions for the management of trusteed assets or own assets and it is divided into three systems: the front-office system, the middle-office system and the back-office system by its business areas and functionalities. This kind of asset management system is a huge and complex system handling large data and various financial products, and requires professional knowledges like accounting, financial product specific knowledge, compliance and regulations, etc. It also performs high level computation for NAV calculation and risk measurement on every day Therefore, it needs absolute stability, extendability and efficiency and should handle the frequent change of regulation and products and connectivity with outdoor institutions. In this paper, we report our successful development of such a system and discuss issues regarding its efficient system design and system construction.

• Journal of Information Processing Systems
• /
• v.16 no.4
• /
• pp.915-934
• /
• 2020

Software refactoring is a process to restructure an existing software code while keeping its external behavior the same. Currently, various refactoring techniques are being used to develop more readable and less complex codes by improving the non-functional attributes of software. Refactoring can further improve code maintainability by applying various techniques to the source code, which in turn preserves the behavior of code. Refactoring facilitates bug removal and extends the capabilities of the program. In this paper, an exhaustive review is conducted regarding bad smells present in source code, applications of specific refactoring methods to remove that bad smell and its effect on software quality. A total of 68 studies belonging to 32 journals, 31 conferences, and 5 other sources that were published between the years 2001 and 2019 were shortlisted. The studies were analyzed based on of bad smells identified, refactoring techniques used, and their effects on software metrics. We found that "long method", "feature envy", and "data class" bad smells were identified or corrected in the majority of studies. "Feature envy" smell was detected in 36.66% of the total shortlisted studies. Extract class refactoring approach was used in 38.77% of the total studies, followed by the move method and extract method techniques that were used in 34.69% and 30.61% of the total studies, respectively. The effects of refactoring on complexity and coupling metrics of software were also analyzed in the majority of studies, i.e., 29 studies each. Interestingly, the majority of selected studies (41%) used large open source datasets written in Java language instead of proprietary software. At the end, this study provides future guidelines for conducting research in the field of code refactoring.