• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.04a
• /
• pp.146-149
• /
• 1997

It is well known that the metallo-phthalocyanines(MPcs) are sensitive to toxic gaseous molecules, such as NO$_2$, NO, SO$_2$. MPcs are thermally, optica1ly, mechanically and chemically stable. Therefore, it is interesting to prepare phthalocyanine LB films containing tin as a chemical sensor for NO$_2$ and SO$_2$ gas and test their sensitivity to these toxic gases. Frist, in this study, ultra thin films of Octa-dodecyloxy tin-phthalocyanine were prepared on various substrates by LB technique. Langmuir-Blodgett(LB) technique is one of the ways of fabricating organic thin films. It has the advantage to control the alignment and orientation of the molecules in the films. $\pi$-A isotherm and transfer ratio of tin-phthalocyanine derivative. UV-VIS. spectroscopy were investigated. Also intrinsic current-voltage(1-V) characteristics of these films was investigated.

• Proceedings of the KIEE Conference
• /
• 1998.11c
• /
• pp.884-885
• /
• 1998

The electrical characteristics of Stearic acid Langmuir-Blodgett(LB) films were investigated to develop the gas sensor using LB films. The deposition status of LB films were verified I-V characteristic which was increased with an applied voltage for the number of layers and decreased as increasing the distance of electrode. The conductivity of Stearic acid LB films was $10^{-8}[S/cm]$, which is typical of semiconductor. The conductivity of LB films were increased as the temperature was increased. The activation energy was about 1[eV].

• Journal of the Korean Applied Science and Technology
• /
• v.14 no.2
• /
• pp.71-79
• /
• 1997

Ultra-thin films of poly[2-[4-(9-(10-phenyl)anthracenyl)phenoxy)hexyloxy]]-1,4-phenylenevinyleylene(PAHPV) were prepare-d on the hydrophilic ITO substrate by Langmuir-Blodgett(LB) technique. ${\lambda}_{max}$ in the photoluminescence spectrum of these films was 458nm at the excitation wavelength of 365nm before thermal treatment, which comes from diphenylanthracene side chain of PAHPV. It was also confirmed with UV-Vis spectrometer that ultra-thin LB films of PAHPV precursor polymer were prepared well. After thermal treatment for conjugation of PAHPV precursor polymer, ${\lambda}_{max}$ in the photoluminescence spectrum of these films changed to 365nm, which means that the conjugation of these PAHPV films was completed.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.40 no.5
• /
• pp.489-495
• /
• 1991

In this paper, we study the electrical conduction mechanism in Langmuir-Blodgett(LB) ultra thin films for which the LB device has a metal/LB films(TCNQ)/metal sandwich structure. Our experiments show that the current at the LB device does not depend on the temperature at below 0 C. This phenomena confirm that the electrical conduction current is a tunnel current inherent to ultra thin films. However, the current depends upon the temperature near the room temperature. This phenomena indicates the electeical conduction current is a Schottky current inherent to ultra thin films.

• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1247-1249
• /
• 1997

Langmuir-Blodgett(LB) method is one of the ways of fabricating organic ultra thin films. It is well known that It has the advantage to control the alignment and orientation of the molecules in the films. Metallo-phthalocyanines (MPcs) are sensitive to electron affinitive toxic gaseous molecules, such as $NO_2$, NO, $SO_2$. In this study, thin films of octa-dodecyloxy copper-phthalocyanine were prepared by LB method and characterized by using UV/Vis absorption spectroscopy and ellipsometry. Optimal transfer condition of LB films was investigated and preliminary results of current-voltage (I-V) characteristics of these films exposed to $NO_2$ gas as a function of film thickness.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.601-604
• /
• 1999

Electroluminescence(EL) devices based on organic thin films have attracted lots of interests in large-area light-emitting display. Recently, many EL researcher have interested a new emissive organic material. In this study, light-emitting organic electroluminescent devices were fabricated using Langmuir-Blodgett(LB) technique with new emissive organic material. This new emissive organic material were synthesis by our teams and we called PECCP [poly(3,6-N-2ethylhexyl carbazoly cyanoterephthalidene)] which has strong electron donor group and electron acceptor group in main chain repeat unit. This material has good solubility in common organic solvent such as chloroform. THF, etc. and has a good stability in air. In here, the new emissive material is applied to Langmuir-Blodgett(LB) method because our new material has a good stability in air. Optimum conditions of film deposition were examined by a surface pressure-area( $\pi$ -A) isotherms with various factors. The LB film were deposited on a indium Tin Oxide(ITO) glass. We were investigated by measuring current-voltage(I-V) characteristics. Also we were measured the UV/visible absorption at about 410nm and PL spectrum at about 530nm. We are attempt to the electroluminescence device properties of the new emissive material by Langmuir-Blodgett(LB) technique.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.343-346
• /
• 1999

We have investigated the dielectric and electrical characteristics of palrnitic acid(PA), stearic acid(SA) and arachidic acid(AA) Langmuir-Blodgett(LB) films because these fatty acid systems have a same hydrophilic group and a different hydrophobic one(alky1 chain lqngth). The dielectric characteristics such as the capacitance-frequency(C-F) characteristics and the dielectric dispersion and absorption characteristics of PA, SA and AA through-plane were measured. In the result, the relative dielectric constants of PA, SA and AA LB films were about 3.0-4.6, 2.7-4.1 and 2.4-3.8, respectively. The relative dielectric constants were decreased in proportion to the chain length of alkyl group. Also, the dielectric dispersion and absorption of each fatty acid LB films have arisen from the dipole polarization in the range of $10^4~10^5[Hz]. And, the conductivity of PA, SA and AA LB films obtained from I-V characteristics were about $9{\times}10^{-14}, 3{\times}10^{-l4} and 5{\times}10^{-15}[S/cm], respectively. These results have shown the insulating materials and could control the conductivity by changing the length of alkyl group. Also, we have confirmed that the barrier height of fatty acid systems were about 1.32-1.40[eV] and the dielectric constant were about 3.0-4.2. These values were almost the same ones obtained from dielectric characteristics.

• Applied Chemistry for Engineering
• /
• v.30 no.2
• /
• pp.233-240
• /
• 2019

Molecular recognition technology has attracted considerable attention for improving the selectivity of a specific molecule by imprinting it on a polymer matrix. In this study, adsorption and release characteristics of chitosan based drug delivery films imprinted with sulindac (SLD) were investigated in terms of the plasticizer, temperature and pH and the results were also interpreted by the related mathematical models. The adsorption characteristics of target molecules on SLD-imprinted polymer films were better explained by the Freundlich and Sips equation than that of the Langmuir equation. The binding site energy distribution function was also useful for understanding the adsorption relationship between target molecules and polymer films. The drug release of SLD-imprinted polymer films followed the Fickian diffusion mechanism, whereas the drug release using artificial skin followed the non-Fickian diffusion behavior.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.11a
• /
• pp.133-136
• /
• 1998

The scanning Maxwell-stress microscopy (SMM) is a dynamic noncontact electric force microscopy that allows simultaneous access to the electrical properties of molecular system such as surface potential, surface charge, dielectric constant and conductivity along with the topography. Here we report our recent results of its application to nanoscopic study of domain structures and electrical functionality in organic thin films prepared by the Langmuir-Blodgett technique.

• Proceedings of the KIEE Conference
• /
• 1998.11c
• /
• pp.881-883
• /
• 1998

We fabricated IMI-O polymer containing imidazole group that can be form a complex structure between the monolayer and the metal ions at the air-water interface. Also, the monolayer behavior at the air-water interface and Langmuir-Blodget films by complexes formation have been investigated by $\pi$-A isotherms, Brewster Angle Microscopy and the scanning Maxwell-stress microscopy.