• E2M - 전기 전자와 첨단 소재
• /
• 제2권1호
• /
• pp.1-13
• /
• 1989

Langmuir-Boldgett(LB)법에 의해서 두께 1층당 약 4.angs.의 폴리이미드 LB막을 제작된 폴리이미드 LB막을 양전극사이에 sandwich시킨 Al/Al$_{2}$ $O_{3}$ /폴리이미드 LB막/Al(Au)구조의 소자를 이용하여 전기적 특성을 조사하였다. 전기저항이 대단히 큰 폴리이미드 LB막과 전기저항이 작은 $Al_{2}$ $O_{3}$막과의 상호작용에 의해 폴리이미드 LB막의 파괴전계는 약 1*$10^{8}$V/cm이었으며 터널전류는 이론값에 비하여 매우 작은 전류의 값을 나타내었다. 이와같은 현상은 전압의 대부분이 폴리이미드 LB막에 만이 인가되며 터널전류는 $Al_{2}$ $O_{3}$막에 의해 제한되기 때문이다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.428-431
• /
• 2002

Recently, the study on development of electrical and electronic device is done to get miniature, high degrees of integration and efficiency by using inorganic materials. the study of Langmuir-Boldgett(LB) method that uses organic materials because of the limitation for the ultrasmall size. The structure of MIM(Metal-Insulator-Metal) device is Cr-Au/ PBLG/ Al. the number of accumulated layers are 1, 3, 5, 7, 9. The I-V characteristic of the device is measured from 0[V] to 2[V] and the characteristic of current-time of the devices. We have investigated the capacitance because PBLG system have a accumulated layers the maximum value of measured current is increased as the number of accumulated layers are decreased. The capacitor properties of a thin film is better as the distance between electrodes is smaller. The results have shown the insulating materials and could control the conductivity by accumulated layers.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1990년도 추계학술대회 논문집
• /
• pp.74-77
• /
• 1990

In this paper, we study the electrical conduction mechanism in Langmuir-Boldgett(LB) ultra thin films. The LB device has a metal/Lb films/metal sandwich structure, where metal is electrode. In our experiments, the temperature does not depend on the current at below 0$^{\circ}C$. This phenomena show that the electrical conduction current is a tunnel current inherent to LB ultra thin films.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.181.3-181
• /
• 2001

Recently, the study on development of electrical and electronic device is done to get miniature, high degrees of integration and efficiency by using inorganic materials. the study of Langmuir-Boldgett(LB) method that uses organic materials because of the limitation for the ultrasmall size. In this paper, to do research for medical artificial organs as well as principal parts living body thin film application, electrical properties of L-$\alpha$-DLPC Langmuir(L) films were investigated a displacement current measuring technique with pressure stimulation. We give pressure stimulation into organic thin films and then manufacture a device under the accumulation condition that the state surface pressure is 20[mN/m]. LB layers of L-$\alpha$-DLPC deposited by LB method ...

• 전자공학회논문지 IE
• /
• 제43권4호
• /
• pp.99-104
• /
• 2006

전기 전자 소자를 제작하는 방법으로 Langmuir-Boldgett(LB)법이 많은 관심을 받고 있다. 수면위에 형성된 단분자막을 압축 또는 확장하면, 분자가 배향하는 과정에서 맥스웰 변위전류(MDC)가 흐른다. MDC는 전속밀도의 변화에 기인해서 흐르므로 MDC를 측정하는 것에 의해 분자의 동적 거동 관찰할 수 있다. 단분자막을 압축하는 속도와 분자면적은 서로 선형적인 관계를 갖고 있다. 본 연구에서는 압축속도를 30, 40, 50mm/min으로 달리하여 단분자막의 동적 거동을 관찰하였으며 LB법을 이용하여 Arachidic acid 단분자를 slide glass 위에 Y-type으로 9$\sim$21층의 다층막을 누적하여 Au/Arachidic acid/Al 소자를 제작하였다. 또한 Metal-Insulator-Metal(MIM) 소자의 I-V 특성을 측정하여 전극간의 거리가 커질수록 절연특성이 좋아짐을 확인하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 춘계학술대회 논문집
• /
• pp.166-169
• /
• 1996

It is well known that the metallo-phthalocyanines (MPcs) are sensitive to toxic gaseous molecules such as NO$_2$ and also chemically and thermally stable and it is recently reported that SnO$_2$ thin films have a selective sensitivity to NO$_2$ and SO$_2$ gas. Therefore, it is interesting to prepare phthalo-cyanine Langmuir-Boldgett(LB) films containing tin as a chemical sensor for NO$_2$ and SO$_2$ gas and test the selectivity with these tin containing LB films. First, in this study, ultra thin films of Octa (2-ethylhexyloxy) tin-phthalocyanine were prepared on various substrates by LB method. $\pi$-A isotherm and transfer characteristics of these films were investigated. The formation of these films was determined by ellipsometry. Intrinsic current-voltage(I-V) characteristics of these films were also measured.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.351-354
• /
• 2001

We fabricated organic electroluminescent(EL) devices with mixed emitting layer of poly (N- vinylcarbazole) ( PVK) , 2,5-bis (5-tert-butyl -2- benzoxaBoly) thiophene ( BBOT) , N,N-diphenyl-N,N- (3-methyphenyl) -1,1-biphenyl-4, 4-thiamine(TPD) and poly(3-hexylthiophene) (P3HT) deposited by LB(Langumuir-Boldgett) method. From the AFM(atomic force microscope) images, the monolayer containing 30% of AA(arachidic acid) showed a roughness value of 28$\AA$. In the voltage-current characteristics of ITO/Emitting layer/BBOT/LiF/A1 devices, current density much smaller than that of the spin-coated devices having a same thickness.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.287-290
• /
• 2000

We give pressure stimulation into organic thin films and then manufacture a device under the accumulation condition that the state surface pressure is 20[mN/m]. LB layers of Arac. acid deposited by LB method were deposited onto y-type silicon wafer as x, y, z-type film. In processing of a device manufacture, we can see the process is good from the change of a surface pressure for organic thin films and transfer ratio of area per molecule. The structure of manufactured device is Au/arachidic acid/Al, the number of accumulated layers. Also, we then examined of the MIM device by means of I-V. The I-V characteristic of the device is measured from 0 to +2[V].

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.92-94
• /
• 2003

Recently, the study on development of electrical and electronic device is done to get miniature, high degrees of integration and efficiency by using inorganic materials, the study of Langmuir-Boldgett(LB) method that uses organic materials because of the limitation for the ultra small size. In this paper, detected displacement current using PBLG and PBDG, deposition and observed the electrical characteristics to each 1, 3, 5, 7, 9 layers by LB method. Maximum value of change ratio of displacement current by the detected speed and temperature appeared almost lineally, could confirm that it are in comparison relation each other speed-temperature and displacement current. The structure of manufactured device is MIM. Also, we then examined of the MIM device by means of I-V. The I-V characteristic of the device is measured from 0 to +2[V]. The insulation property of a thin film is better as the distance between electrodes is larger.

• 폴리머
• /
• 제24권1호
• /
• pp.90-96
• /
• 2000

고분자 정공 전달체로 LB 기법에 의해 제조한 PDPMA 초박막과 발광층으로 Alq$_3$를 사용하여 유기 발광소자를 제작하였다. 표면활성제로 arachidic acid를 사용하여 안정한 PDPMA 단분자막을 얻을 수 있었다. PDPMA LB 필름의 두께와 320nm의 최대 흡광도는 층수의 증가에 따라 거의 선형적으로 증가하였다. ITO/PDPMA LB 필름(19층)/Alq$_3$/Al으로 구성된 유기 적층형 소자는 DC 14V에서 2500 cd/m$^2$의 높은 휘도를 갖는 녹색 빛을 발광하였다. 특히 PDPMA LB 필름의 층이 15로 이루어진 발광소자의 구동전압은 4V의 매우 낮은 값을 나타내었다. PDPMA LB 필름의 두께 조절 및 분자 배향에 따른 EL 성능에 미치는 영향에 관하여도 검토하였다.