• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.8
• /
• pp.724-731
• /
• 2006

We investigated the electrochemical properties for Langmuir-Blodgett (LB) films mixed with 4-octyl-4'-(5-carboxylpentamethyleneoxy)azobenzene (denoted as 8A5H) and phospholipid(L-a-dimyristoylphosphatidylcholine, denoted as DMPC and L-a-dilauroylphosphayidylcholine, denoted as DLPC). The LB films of 8A5H, 8A5H-DMPC and 8A5H-DLPC mixture monolayers were deposited by using the LB method on the indium tin oxide(ITO) glass. The electrochemical properties measured by using cyclic voltammetry with a three-electrode system, an Ag/AgCl reference electrode, a platinum wire counter electrode and LB film-coated ITO working electrode at various concentrations(0.1, 0.5, and 1.0 mol/L) of $NaClO_4$ solution. A measuring range was reduced from initial potential to -1350 mV, continuously oxidized to 1650 mV and measured to the initial point. The scan rates were 50, 100, 150 and 200 mV/s, respectively. As a result, LB films of 8A5H and 8A5H-DLPC mixture monolayers appeared irreversible process caused by only the oxidation current from the cyclic voltammogram and LB films of 8A5H-DMPC monolayer mixture was found to be caused by a reversible oxidation-reduction process.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.211-214
• /
• 2003

The tribological properties of amphiphilic monolayers and composite multilayer on silicon surface were investigated using micro-tribometer and Auger Electron Spectroscopy. Langmuir-Blodgett (LB) monolayers from behenic acid. 2.4-heneicosanedione(HD) and its copper complex((HD)$_2$Cu) were fabricated on silicon surface and the composite multilayer of 5-bilayer of (HD)$_2$Cu was fabricated on the surface of octadecyltrichlorsilane (OTS) self-assembled monolayer(SAM). We observed that LB monolayers and the composite multilayer exhibited a steady and excellent friction response when compared with the OTS SAM. These LB mono and multilayer also showed much higher wear-resistance than the OTS SAM.

• Proceedings of the KIEE Conference
• /
• 1987.11a
• /
• pp.511-514
• /
• 1987

Langmuir-Blodgett (LB) films of TCNQ(tetracyanoquinodimethane) with alkyl radical($C_{12}TCNQ$) were prepared on the sample of Al/LB film/Al type where Al are electrode, and polarization in LB film and dipolar moment of molecules in the films were measured by TSC. $Al_2O_3$ layer was yielded on the electrode by natural oxidation in air. According to the cooperation of $Al_2O_3$ dielectric layer and the polarization of $C_{12}TCNQ$-LB film, the macroscopic electrical field was yielded in LB film and $Al_2O_3$ layer. The field strength in $C_{12}TCNQ$-LB films was evaluated at about $1{\times}10^6{\sim}5{\times}10^6\;V/cm$.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.7
• /
• pp.508-513
• /
• 1999

The response properties of quartz crystal coated with stearic acid LB films to organic gases were investigated by measuring the shift of resonant frequency. Stearic acid was used as a sensing material and deposited on the surface of quartz crystal using the Langmuir-Blodgett(LB) method. The effect of temperature on the quartz crystal coated with stearic acid LB films was also investigated by Scanning Maxwell-stress Microscopy(SMM). As a result, the sensitivity of the quartz crystal coated with LB films to organic gases is dependent on temperature, thickness of LB film and molecular weight of organic gas.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1994.11a
• /
• pp.118-121
• /
• 1994

The NO$_2$ gas-detection characteristics were investigated using the functional organic Langmuir-Blodgett(LB) film of Copper-tetra-tert-butylphalocyanine(CUTBP). The optimum conditions for a film deposition were obtained through a study of $\pi$-A isotherm and the deposited film status was confirmed by ellipsometry measurements. In the NO$_2$ response experiments, first of all, the proper number of layer was obtained by a change of the electrical conductivities depending on the number of layer when the film is exposed to the gas. And response time, recovery time, and reproducibility were measured on it. On the other hand, how the NO$_2$ gas interacts to the LB film was studied by UV/visible absorption spectra.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1995.05a
• /
• pp.111-114
• /
• 1995

This paper describes the imidization of PAAS(polyamic acid alkylamine salts) Langmuir-Blodgett (LB) films and the electrical properties of PAAS and polyimide(PI) LB films, The imidization conditons were investigated by TGA(Thermal Gravi-tational Analysis). FT-IR and UV/ visible absorption spectra. A thermal imidiczation was peformed at 300$^{\circ}C$ for 1 hour. The electrical properties of the PAAS and polymide LB films were measured by current-voltate(L-V) characteristics It shows that the electrical condcutivity of PL LB films is about 10 $\^$-15/S/cm which is two orders of magnetiude lower than that of the PAAS LB films A Schottky effect was also observed in both films.

• Tribology and Lubricants
• /
• v.19 no.6
• /
• pp.329-334
• /
• 2003

The antiwear properties of amphiphilic monolayers and composite multilayer on silicon surface were investigated using micro­tribometer and Auger Electron Spectroscopy. Langmuir­Blodgett (LB) monolayers from behenic acid, 2,4­heneicosanedione(HD) and its lopper complex((HD)$_2$Cu) were fabricated on silicon surface and the composite multilayer of 5­bilayer of (HD)$_2$Cu was fabricated on the surface of octadecyltrichlorosilane (OTS) self­assembled monolayer (SAM). We observed that LB monolayers and the composite multilayer exhibited a steady and excellent friction response when compared with the OTS SAM. These LB mono and multilayer also showed much higher wear­resistance than the OTS SAM.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.6
• /
• pp.493-498
• /
• 1995

Ultrathin networks of itaconic acid copolymers and poly(allylamine) were produced by a Langmuir-Blodgett (LB) technique employing a double-chain amine as a monolayer template which was subsequently removed by extraction after thermal crosslinking. Itaconic acid copolymers used were copoly (itaconic acid-ethyl vinyl ether) and copoly (itaconic acid-n-butyl vinyl ether). The polyion-complexed monolayers of three components consisting of template amine, itaconic acid copolymer and poly (allylamine) were formed at the air-water interface. The Langmuir film properties have been studied by the surface pressure-area isotherm and fluorescence microscopy. The monolayers were transferred on solid substrates and were characterized by FT-IR spectroscopy, X-ray photoelectron spectroscopy, and scanning electron microscopy (SEM). Two-dimensional polymer networks were formed through imide or amide linkages by heat treatment under vacuum. The heat-treated films were extracted with chloroform after immersion in aq. sodium chloride to remove the template amines. SEM observation of a LB film on a porous fluorocarbon membrane filter with pore diameter of 0.1 μm showed covering of the pores by six layers in the polyion complex state.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.4
• /
• pp.316-320
• /
• 1995

The incorporation of metal ion into the Langmuir-Blodgett (LB) film of an itaconate copolymer was investigated. The polymer was prepared via radical copolymerization of monooctadecyl itaconate with triethyleneglycol methyl vinyl ether. The metal ions employed were Na+, Cs+, Mg2+, Fe2+, Al3+, and Fe3+. The surface pressure-area isotherms indicated that all the monolayers studied on subphases with metal ions showed more expanded areas than that observed on pure water. The monolayers showed an irreversible collapse behavior. The collapse pressure of the monolayers was low on subphases containing trivalent metal ions. From the FT-IR spectra by reflection and transmission modes, the formation of carboxylate salts and the uprisen orientation of the pendant against substrate surface in the polymer LB film were determined. It was estimated by XPS measurement that ca. 13.1 repeat units of the polymer contain one Na+ ion, while one Mg2+ ion corresponds to 5.9 carboxyls.

• 전자공학회논문지 IE
• /
• v.43 no.4
• /
• pp.99-104
• /
• 2006

The Langmuir-Blodgett(LB) technique has attracted considerable interest in the fabrication of electrical and electronic devices. Maxwell displacement current (MDC) measurement has been employed to study the dielectric property of Langmuir-films. MDC flowing across monolayers is analyzed using a rod-like molecular model. A linear relationship between the monolayer compression speed u and the molecular area Am. Compression speed a was about 30, 40, 50mm/min. Langmuir-Blodgett(LB)layers of Arachidic acid deposited by LB method were deposited onto slide glass as Y-type film. The structure of manufactured device is Au/Arachidic acid/Al, the number of accumulated layers are 9$\sim$21. Also, we then examined of the Metal-Insulator-Metal(MIM) device by means of I-V. The I-V characteristics of the device are measured from -3 to +3[V]. The insulation property of a thin film is better as the distance between electrodes is larger.