• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1999년도 제30회 추계학술대회
• /
• pp.263-268
• /
• 1999

Langasite, a new piezoelectric material was polished by CMP(chemical mechanical polishing). To enhance the polishing rate, alumina abrasives were added to commercial ILD1300 slurry which contains silica abrasive. The effect of added alumina 0 the silica slurry on the polishing rate and damage of langasite was investigated, Experimental results show that the polishing rate and roughness increases with increasing added alumina particle size, Crystallinity of the langasite is also lowered by alumina addition.

• Transactions on Electrical and Electronic Materials
• /
• 제13권2호
• /
• pp.51-59
• /
• 2012

Piezoelectric langasite crystals have superior properties such as high temperature performance and high quality Q and can be applied in combustion pressure sensors and surface acoustic wave (SAW) filters. Crystal growth, crystal structure and properties of langasite group are reviewed, and the mechanism of piezoelectricity of langasite is presented based on the crystal structure and deformation under high pressure. Finally, for the discovery of new piezoelectric materials, this paper presents the role of the framework, and recommends the search of framework crystal structure, because the characteristic of the mechanism exists on the framework of the crystal structure.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1998년도 PROCEEDINGS OF THE 14TH KACG TECHNICAL MEETING AND THE 5TH KOREA-JAPAN EMGS (ELECTRONIC MATERIALS GROWTH SYMPOSIUM)
• /
• pp.121-125
• /
• 1998

Langasite is a new piezoelectric material which is similar to quartz in its acoustic behaviours. In this study, pure Langasite and Langasite family grouo powders were synthesized by the solid state reaction in air. And then diffusion of synthesized powders were controlled by B and C ions in the{{{{ { A}_{ 3} { B}_{5} { CD}_{ 14 }}}}} structure. Dielectric constant and lattice anisotripy of Langasite and family group were measured to be 17, 22~27 in the range of 1 kHz to 13 MHz and about 1.6. respectively.

• 한국세라믹학회지
• /
• 제36권12호
• /
• pp.1364-1368
• /
• 1999

Langasite( La3Ga5SiO14) is suitable for new piezoelectric properties. Langasite can be applied for communication de-vices due to intermediate piezoelectric properties which are similar to those of quartz and LiTaO3 in its acoustic cha-racteristics. In this study Langasite( La3Ga5SiO14) single crystals were successfully grown by using self-designed Czo-chralski system. From the results of optical properties it was found that crystals having a high quality and higher optical transmittance were grown at atmosphere of 1 to 30 vol% of oxygen content.

• 한국결정성장학회지
• /
• 제9권1호
• /
• pp.74-79
• /
• 1999

Langasite($La_3Ga_5SiO_14$)는 acoustic 특성에서 quartz, $LiTaO_3$ 와 $LiNbO_3$에 비교되는 새로운 압전재료이다. 본 연구에서는 새로운 Langasite 계열의 물질을 공기 중에서 고상반응법에 의해 합성하였고, 합성공정에서의 주요 확산종 을 조사하였다. 이때 합성된 물질의 소결체를 제조하여 각각의 유전적 성질을 비교평가하였다. 또한, Langasite 단결정 을 자체제작한 Czochralski 시스댐을 사용하여 성장시키는데 성공하였고, 성장된 결정의 물성을 평가하였다

• 한국결정성장학회지
• /
• 제12권2호
• /
• pp.63-67
• /
• 2002

부유대역법을 이용하여 직경 Langasite 단결정을 Ar과 $O_2$가 혼합된 가스의 분위기에서 성장시켰으며, 그때 성장속도는 각각 1.5 mm/hr, 회전속도는 15rpm이었고, 성장된 결정은 투명한 짙은 오렌지색을 가졌다. 성장된 결정은 c 축 방향으로 성장되었으며, 길이 방향의 조성변동이 없이 성장한 것을 확인할 수 있었고, 성장된 결정은 $La_{3.10}Ga_{4.73}Si_{1.17}O_{14}$의 조성을 가지고 있었다. 500nm 부근의 흡수밴드는 성장된 결정의 오렌지빛과 관계가 있는 것을 확인할 수 있었으며, 계산된 Langasite의 활성화에너지는 0.23eV이었고, $300^{\circ}C$ 이상의 온도에서 PTC의 특성을 나타내는 것을 알 수 있었다.

• 한국결정성장학회지
• /
• 제15권1호
• /
• pp.34-38
• /
• 2005

Langasite 단결정 wafer의 chemical mechanical planarization 공정에서 pH level 및 slurry 입도가 가공속도 및 평탄화도에 미치는 영향을 조사하였다. 낮은 pH level 조건하에서 더 높은 가공속도 값이 얻어진 반면에 평탄화도는 colloidal silica slurry의 평균입경에 의해 좌우됨을 확인하였다. 0.045 ㎛의 비정질 silica 입자를 함유한 슬러리를 사용하였을 때 표면에 잔류 scratch 형성이 없이 가장 좋은 가공성을 확보할 수 있었다. 가공속도와 평탄화도는 effective particle number에 대한 강한 의존성을 나타내었으며, effective particle number가 낮은 조건하에서 가공속도는 더 낮은 분포를 나타내었으나 평탄화도는 더 우수한 경향성을 확인하였다.

• 한국결정성장학회지
• /
• 제10권4호
• /
• pp.309-317
• /
• 2000

Langasite is a promising new piezoelectric material for SAW filter application. Little was known until recently about the methods needed to mechanically polish and chemically polish/etch this material. In this experiment, polishing, slurry chemistry and chemical wet etching for langasite is described. Conventional quartz and LN ($LiNbO_3$) polishing methods did not produce satisfactory polished surfaces, and polishing with a colloidal silica slurries has shown to be most effective. The optimum condition was investigated by changing the slurry chemistry. As the planarization effect is very important in SAW filter applications, the examination of the effective particle number effect and the particle size effect was carried out. Z-cut langasite surface which had been polished with the colloidal silica slurries was etched in a variety of etchants. Conventional quartz etchants destroyed the polished surface. Other etchants formed a thin film on the surfaces. In this experiment, the reaction between langasite and a few etching solution was analysed. And an appropriate selective etchant solution for analyzing the defects was synthesized.

• 한국세라믹학회지
• /
• 제36권6호
• /
• pp.640-645
• /
• 1999

Recently rapid progress of electronic and telecommunication technology requires the development of new piezoelectric materials and cellular communication is more and more used in various fields. Langasite(La3Ga5SiO14) is suitable for new piezoelectric properties. Langastie can be applied as communication devices due to intermediate piezoelectric properties which are similar to those of quartz and LiTaO3 in its acoustic characteristics. So in this study Langastie(La3Ga5SiO14) single crystal with 47 mm in diameter and 25mm in length were sucessfully grown by using self-designed Czochralski system. In addition optimum growth conditions for the piezoelectric applications throughout estimation of crystal quality and frequency characteristics were investigated.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2000년도 춘계총회,특별강연,심포지움,연구발표회
• /
• pp.72.2-72.2
• /
• 2000