• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.17-17
• /
• 2000

In this paper, we design a hybrid controller for a safe lane change maneuver in automated highway systems(AHS). The proposed hybrid controller consists of a supervisor which controls the behaviors of discrete-event dynamic systems, and a regulator which controls the operations of continuous-variable dynamic systems. The supervisor determines whether the system starts a maneuver or not, via a condition for a safety, and gives orders to the regulator for performing the maneuvers. And the regulator tracks the planned path generated in the supervisor. The conditions for a safe lane change maneuver are proposed using the velocity, the acceleration, and geometrical relationship of vehicles.

• 자동차안전학회지
• /
• 제10권1호
• /
• pp.38-44
• /
• 2018

This paper presents an analysis on driving safety in lane change situation based on road driving data. Autonomous driving is a global trend in vehicle industry. LKAS technologies are already applied in commercial vehicle and researches about lane change maneuver have been actively studied. In autonomous vehicle, not only safety control issue but also imitating human driving maneuver is important. Driving data analysis in lane change situation has been usually dealt with ego vehicle information such as longitudinal acceleration, yaw rate, and steering angle. For this reason, developing safety index according to surrounding vehicle information based on human driving data is needed. In this research, driving data is collected from perception module using LIDAR, radar and RT-GPS sensors. By analyzing human driving pattern in lane change maneuver, safety index that considers both ego vehicle and surrounding vehicle state by using relative velocity and longitudinal clearance has been designed.

• 한국콘텐츠학회논문지
• /
• 제21권1호
• /
• pp.139-146
• /
• 2021

자율주행자동차의 상용화를 앞두고, 현재의 교통체계에 적용을 검토해야 한다. 한정된 교통 환경에서 자율 주행자동차가 적용되었을 때, 차선변경 규칙을 효과적으로 설정하는 것만으로도 이득을 가져올 수 있다. 본 연구는 소규모 군집주행을 포켓주행으로 정의하고, 차량 간에 효과적인 이동을 제안한다. 복잡한 도로상황을 가정하고 제안한 협조운행방식을 적용 하였다. 정체된 도로환경에서 차량 간의 불규칙한 차간간격은, 통제와 협조에 의해 차선변경 하고자 하는 차량의 수락간격 확보를 가능하게 한다. 차량의 이동 방법에 대해 다양한 연구를 진행 중이며, 한 가지 예시를 기술하였다. 기존 차선변경방법보다 제안한 차선변경 방법은 최대 86.6%의 교통 지연시간 감소를 나타내었다. 효과적인 차선변경 방법으로 교통량 개선을 보였으며, 나아가 차세대 도로설계에 영향력 있는 인자로써 기대할 수 있다.

• 한국자동차공학회논문집
• /
• 제16권3호
• /
• pp.127-136
• /
• 2008

Vehicle stability is a very important subject in vehicle design and control, because vehicle safety is closely dependent upon its dynamic stability. The control logic for four-wheel steering(4WS) systems, in which maintaining at least the specified stability region is the control objective, was constructed using the simplified vehicle model of 3 degree-of-freedoms. The improvement of vehicle stability was verified through computer simulations for the slalom and the double lane change maneuver using the multi-body dynamic model in MSC.ADAMS.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 B
• /
• pp.465-467
• /
• 1998

A lane change maneuver is a part of lateral control of an automated highway system. Assuming no direct measurement of its position during transition from one lane to another. A vehicle is controlled to follow the virtual desired trajectory using only on-board sensors. This paper investigates the development of a fuzzy controller for automated lateral control during emergencies. The performance of the fuzzy controller is presented at 20m/s for a step lane change and a double lane change. The robustness of fuzzy controller is investigated with respect to change in tire parameters and the number of passengers.

• 한국자동차공학회논문집
• /
• 제7권5호
• /
• pp.240-248
• /
• 1999

This paper presents a lane-change collision avoidance control algorithm for autonomous vehicles that will be used in AHS(Automated Highway System). In the proposed control algorithm, nominal control inputs are generated by solving the inverse vehicle dynamic equations of motion for a lane-change maneuver. In addition, a corrective steering input from preview as well as DYC (Direct Yaw Moment Control) may be included to reduce unpredictable errors and to insure yaw directional stability, respectively. The performance of the algorithm is evaluated with an ABS HILS system which consist of 17 DOF vehicle model and real ABS hardware parts. The HILS simulation results show that the proposed algorithm may be used for emergency lane-change maneuvers for autonomous vehicles.

• 한국자동차공학회논문집
• /
• 제5권3호
• /
• pp.209-219
• /
• 1997

A fuzzy driver model based on a preview-predictor and yaw rate is developed. The model is used to investigate the handling performance of two wheel steering system(2WS) and four wheel steering system(4WS) vehicles. The two degree-of- freedom model which has yaw and lateral motion predicts the path of the vehicles. Based upon the yaw rate and lateral deviations, the fuzzy engine describes the human driver's complicated control behavior which is adjusted for the driving environment. Both typical single lane change maneuver and double lane change maneuver are adopted to demonstrate the feasibility of fuzzy driver model.

• 동력기계공학회지
• /
• 제1권1호
• /
• pp.106-123
• /
• 1997

In this study, vehicle directional stability is investigated for limit driving for crash avoidance maneuver using a full vehicle dynamic model. The model was analytically validated using typical step steering and lane change simulation. Limit driving condition for the vehicle model was quoted from research results of references. It was demonstrated that instable vehicle motion was caused by not only road conditions but also driving conditions. Also, the simulation showed that braking combined with steering caused very hazardous situation in crash avoidance maneuver. Finally, phase plane plot approach was used to evaluate the dynamic instability.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.1147-1156
• /
• 1993

In order to analyze lateral control in the backward maneuver of a tractor -trailer combination , a kinematic vehicle model and a human operator model with time delay were utilized for the operator/vehicle system. The analysis was carried out using the frequency domain approach. The open-loop stability of the vehicle motion was analyzed through the transfer functions. The sensitivity of the stability of the vehicle motion. to a change in the steering angle, was also analyzed. A mathematical model of the closed -loop operator/vehicle system was then formulated. The closed -loop stability of the operator /vehicle system was then analyzed. The effect of the delay time on the system was also analyzed through computer simulation.

• 한국ITS학회 논문지
• /
• 제14권3호
• /
• pp.9-23
• /
• 2015

차로변경은 운전자의 숙련된 주변인식 및 운전기술이 요구되어 심각한 교통사고를 야기한다. 그리하여 우리는 불가피한 차로변경이 대두되는 고속도로 합류구간에서 본선으로 합류하는 차량의 차로변경을 보조하는 차량 자동제어 시스템 (ALCAS; Advanced Lane Change Assist System)을 개발한다. 본 연구에서는 ALCAS 중 조향이 수행되기 이전에 최적 차로변경 시작지점(Optimal Lane Change Start Point; OLCSP)을 생성하고 그 지점까지 도달하는 종방향 제어 알고리즘 개발에 초점을 두었다. 이를 위해 우선 고속도로 합류구간의 차로변경 행태를 분석하였고, 실제 차량의 가속도 함수 형태를 통해 차로변경 특징모형(Lane Change Feature Model)을 설계하였다. 그 후 차로변경 수행 단계를 정립하였으며, 이 알고리즘 성능과 타당성을 검증하기 위하여 다양한 주변차량 주행환경에 따른 시나리오 시험을 수행하였다. 또한 개발된 알고리즘의 효과를 미시적 교통류 시뮬레이션 (VISSIM)을 통해 확인하였다. 개발한 알고리즘을 합류차량에 적용한 결과 안정류 상태에서 합류성능이 두드러지게 개선되는 것을 확인하였다. 이 차량 자동제어 시스템은 교통 자동차 분야 융합기술의 일환으로 개발되었으며, 운전자의 부하와 오류를 감소시켜 효율성과 안전성을 향상시킬 뿐만 아니라 교통류의 안정성, 임계용량, 주행 효율성의 증대로 사회비용 감소를 기대할 수 있다.