• 제목/요약/키워드: Land-ocean coupling

검색결과 6건 처리시간 0.02초

낙동강 하구에서 담수 유입에 따른 연안 클로로필-a 증가 : 낙동강의 육상-해양 coupling 패턴 분석 (Enhanced Primary Production in Response to Freshwater Inflow in the Nakdong River Estuary: Characteristics of land-Ocean Coupling (LOC))

  • 김수현;안순모
    • 한국해양학회지:바다
    • /
    • 제26권2호
    • /
    • pp.96-109
    • /
    • 2021
  • 담수를 통해 유입되는 육상 기원 물질은 연안 일차 생산을 제어하는 주요 요소이므로 육상-해양 coupling을 파악하는 것은 연안 생태 변화를 이해하는데 중요하다. 본 논문에서는 육상-해양 coupling 양상을 시간에 따라 세 단계(Base flow, Plume event, Residual flow)로 구분하여 개념화하였고, 낙동강 하구에서 각 양상의 출현을 확인하기위해 다양한 플랫폼에서 측정된 자료를 사용하여 분석하였다. 사용된 자료는 원격 탐사 측정 자료(Geostationary Ocean Color Image; GOCI), 현장 실측 자료(Marine Environment Information System; MEIS), 연속 측정 자료(유량 자료, 기상 자료)로 구분될 수 있다. 주성분분석을 통해 MEIS 자료를 육상-해양 coupling의 세 단계로 구분하였고, 이 구분을 2013-2018년 동안의 여타 자료에 적용하여 단기간 육상-해양 coupling 양상을 살펴보았다. 낙동강 하구에서는 예상과는 달리 Plume event때 Chlorophyll-a (Chl-a) 최대값이 나타났다. 이는 담수 증가에도 탁도 증가는 크지 않았고, 플러싱 효과도 약해 식물플랑크톤이 증가 할 수 있는 여건이 조성되었기 때문으로 분석되었다. 육상-해양 coupling을 기반으로 여러 하구들과 비교해보았을 때 육상-해양 coupling은 담수 유입에 영향을 받는 하구에서 흔한 현상이나 하구에서 형성되는 플룸 크기에 따라 육상-해양 coupling이 다르게 나타났다. 낙동강 하구처럼 작은 플룸(~10 km 규모) 이 형성되는 하구에서는 식물플랑크톤의 즉각적인 반응으로 인해 Plume event 단계에 Chl-a 최댓값이 나타나는 반면, ~100 km 이상의 큰 플룸이 형성되는 하구(담수 배출이 크고, 플러싱이 강한 곳)에서는 본 연구에서 개념화한 육상-해양 coupling 양상(Residual flow 때 Chl-a 최대)을 따르는 것으로 나타났다.

The Characteristics of Signal versus Noise SST Variability in the North Pacific and the Tropical Pacific Ocean

  • Yeh, Sang-Wook;Kirtman, Ben P.
    • Ocean Science Journal
    • /
    • 제41권1호
    • /
    • pp.1-10
    • /
    • 2006
  • Total sea surface temperature (SST) in a coupled GCM is diagnosed by separating the variability into signal variance and noise variance. The signal and the noise is calculated from multi-decadal simulations from the COLA anomaly coupled GCM and the interactive ensemble model by assuming both simulations have a similar signal variance. The interactive ensemble model is a new coupling strategy that is designed to increase signal to noise ratio by using an ensemble of atmospheric realizations coupled to a single ocean model. The procedure for separating the signal and the noise variability presented here does not rely on any ad hoc temporal or spatial filter. Based on these simulations, we find that the signal versus the noise of SST variability in the North Pacific is significantly different from that in the equatorial Pacific. The noise SST variability explains the majority of the total variability in the North Pacific, whereas the signal dominates in the deep tropics. It is also found that the spatial characteristics of the signal and the noise are also distinct in the North Pacific and equatorial Pacific.

Wind spectral characteristics on strength design of floating offshore wind turbines

  • Udoh, Ikpoto E.;Zou, Jun
    • Ocean Systems Engineering
    • /
    • 제8권3호
    • /
    • pp.281-312
    • /
    • 2018
  • Characteristics of a turbulence wind model control the magnitude and frequency distribution of wind loading on floating offshore wind turbines (FOWTs), and an in-depth understanding of how wind spectral characteristics affect the responses, and ultimately the design cost of system components, is in shortage in the offshore wind industry. Wind spectrum models as well as turbulence intensity curves recommended by the International Electrotechnical Commission (IEC) have characteristics derived from land-based sites, and have been widely adopted in offshore wind projects (in the absence of site-specific offshore data) without sufficient assessment of design implications. In this paper, effects of wind spectra and turbulence intensities on the strength or extreme responses of a 5 MW floating offshore wind turbine are investigated. The impact of different wind spectral parameters on the extreme blade loads, nacelle accelerations, towertop motions, towerbase loads, platform motions and accelerations, and mooring line tensions are presented and discussed. Results highlight the need to consider the appropriateness of a wind spectral model implemented in the strength design of FOWT structures.

양방향 카페리 추진축 1차 지지부 구조건전성 평가 (Two-Way Car Ferry Thrust Shaft Primary Support Part Structural Integrity Evaluation)

  • 강병모;오영철;배동균;고재용
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2013년도 추계학술대회
    • /
    • pp.163-164
    • /
    • 2013
  • 양방향차도선(CAR-FERRY)은 육지와 도서, 도서와 도서 간을 연결하는 교통수단 기능과 지속적인 해양관광객의 수요증가에 따른 해양관광 연계 연안여객 운송수단 역할을 하고 있다. 이에 따른 양방향 차도선은 이용의 편리성이 증대 되고 접안으로 인한 해양 사고를 줄일 수 있다. 양방향차도선은 등흘수(even) 상태로 프로펠러가 양쪽에 있기 때문에 프로펠러가 소직경 저회전으로 인하여 전진 운항 시에 반력에 의한 축계 및 프로펠러 파손 등이 발생할 수 있다. 이에 따른 엔진 출력, 선형, 비틀림 진동 등에 따른 감속기, 탄성커플링 선정, 횡진동 및 축계정렬(Shaft alignment)을 고려한 축계설계(베어링 수량, 폭, 간격)를 하여 선체의 추진축 1차 지지부의 구조에 대한 건전성을 평가하였다.

  • PDF

유한요소 폭풍해일 모형을 이용한 직립안벽에 대한 범람모의 (Inundation Simulation on a Vertical Dock Using Finite Element Storm Surge Model)

  • 서승원;이화영
    • 한국해안·해양공학회논문집
    • /
    • 제24권4호
    • /
    • pp.235-246
    • /
    • 2012
  • 연안방재계획 수립을 위한 기초자료 생성의 일환으로 태풍에 의한 해일 범람모의를 수행하였다. 통상적인 침수-노출 처리가 불가한 직립안벽을 갖는 항만역의 특징이 반영되도록 가상의 내부제방 개념을 도입하여 해석하였다. 목포항에 대한 실제해역 적용에 앞서 단순해역에서 다수의 적용성 평가를 통해 내부제방의 폭은 1 m가 적정한 것으로 평가되었다. 해일범람으로 인한 침수면적과 침수심 산정에 민감하게 작용하는 육역의 침수-노출 처리기법에서의 최소침수심은 격자에 의존적이나 10 m 내외의 유한요소 상세격자에서는 0.01 m가 적정한 것으로 판단된다. 기존 태풍경로에 준거한 100년 빈도급 중심기압과 최대풍속을 가지며 비대칭 경도풍과 파랑효과가 고려된 가상태풍의 내습에 따른 목포해역의 침수예상역이 모의되었다. 침수면적은 기존 연구결과와 유사성을 나타내지만 항만권역 일부에서 확대 가능성이 있는 것으로 평가된다.

선박 추진용 유압작동식 다판 마찰클러치 고착현상 고장탐구 (Root cause analysis of sticking in hydraulically actuated multi-disc friction clutch for ship propulsion)

  • 정상후;김정렬;신재원
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제41권4호
    • /
    • pp.330-336
    • /
    • 2017
  • 본 연구는 고무 탄성커플링을 적용한 특수선의 디젤엔진 추진체계에서 유압작동식 다판, 습식 마찰클러치의 고착에 대한 원인분석 내용이다. 클러치 고착원인 분석을 위해 피쉬본((fish bone) 방법으로 클러치 및 감속기어 분해조사, 선박 탑재상태에서의 체계 시험 및 부품 조사, 비파괴 시험 등을 통해 수행하였다. 마찰판 고착은 클러치 중공축의 크랙부를 통해 제어오일 누설로 인한 슬립, 마찰열 발생에 의해 발생되었다. 마찰판 냉각 오일 또한 크랙부를 통해 동시에 누설에 기인한 유량부족으로 클러치 마찰판은 국부적인 눌러붙임이 발생하는 핫스팟(hot spot)에 의해 고착되었다.