• 제목/요약/키워드: Land leveling

검색결과 37건 처리시간 0.027초

중력장 모델링을 위한 고속 Hartley 변환기법의 적용 (East Hartley Transform Technique as a Efficient Tools for Gravity Field Modelling)

  • Yun, Hong-Sic
    • 한국측량학회지
    • /
    • 제16권1호
    • /
    • pp.17-26
    • /
    • 1998
  • 본 논문은 Fast Hartley Transform 기법을 소개하고 이를 이용하여 한반도 주변의 지오이드를 결정하기 위한 것이다. 본 연구에서 사용한 중력 측정 데이터는 69,001점으로 남한지역과 BGI로부터 획득한 해상중력데이터로 구성하였으며, 북한쪽은 회기분석에 의하여 $1km\times{1km}$ 격자 간격으로 추정하였다. 지오이드의 결정을 위하여 96년에 발표된 EGM96 포텐셜모델을 채택하여 차수 360까지 계산하여 장 파장효과를 구하였고, FHT기법을 적용하여 중력데이터로부터 중 파장효과를 계산하여 이들 두 효과를 합하여 최종 지오이드면을 결정하였다. 본 연구를 통하여 얻어진 지오이드고를 GPS/Leveling에 의하여 구한 지오이드고와 비교한 결과 표준편차가 약 33 cm 이었다.

  • PDF

불도우저에 의한 개간 공법의 개선과 숙지화에 관한 연구 (Study on the Improvement of Land Clearing Methods by Bulldozer & Fertilization of Cleared Soil)

  • 황은
    • 한국농공학회지
    • /
    • 제17권1호
    • /
    • pp.3627-3641
    • /
    • 1975
  • The Government is trying to increase total food grain yield to meet national self sufficiency by means of increasing unit yield as well as extending crop land, and this year he set the target of 321,000 hectare of forest to clear for cropping. This study was carried to investigate the most efficient method of clearing hillock by bulldozer, and successful method to develope yielding potential of newly cleared land in short term. Since the conventional land clearing method is just earth leveling and root removing neglecting top soil treatment, the growth of crop was poor and farmer tends not to care the land. The top-soil-furrowing method is applied through out this study, that is advantageous especially for the land having shallow top soil and low fertility like Korean forest. In this study, various operating method were tried to find out most efficient method separately in connection with the land slope less than 25 percent and over, and several fertilizing methods to develop yielding potential. The results are as follows; 1) For the natural land slope utilization method, applicable to the land having less than 25 percent slope, reverse operating was more efficient than using forward gear of bulldozer. The operating time was 3 hour 32 minutes and 36 seconds using forward gear was 2 hour 32 minutes and 30 seconds for reverse gear operation per 1,000 square meter. 2) Bulldozer having angle blade adjustment needed 7hr 15min. for constructing of terrace per 10a compaire with the one having angle & tilt adjustment needed 6hr 4min for same operations. Specially there is significant difference for operation time of first period (earth cutting) such as bulldozer having angle blade adjustment needed 3hr 56min compaired with the one having angle & tilt adjustment 3hr 59min. In construction of terrace, the bull-dozer having tilting and angle blade adjustment was most suitable and performed efficiently. 3) For the fertilizer application treatment, the grass (Ladino clover) yield in first year was almost same as ordinary field's in the plot applied(N.P.K+lime+manure) while none fertilizer plot showed one tenth of it, and (N.P.K.+lime) applied plot yielded on third. 4) The effect of different land clearing method to yield showed significant difference between each treatment especially in the first year, and the conventional method was the lowest. In the second year, still conventional terracing plot yielded only half of ordinary field while the other plots showed as same as ordinary field's. 5) The downward top soil treatment plot showed most rapid improvement in soil structure during one year physio chemically, it showed increase in pH rate and organic composition, and the soil changed gradually from loam to sand-loam and the moisture content increased against the pF rate, and it gives good condition to grow hay due to the increase of field water capacity with higher available water content. 6) Since the soil of tested area was granite, the rate of soil errosion was increased about 2 to 5 percent influencing in soil structure more sand reducing clay content, and an optimum contour farming method should be prepared as a counter measure of errosion.

  • PDF

자동 표고 측정 장치 개발에 관한 연구 (A Study on the Development of the Automatic Level Measurement System)

  • 김종안;김수현;곽윤근
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1997년도 춘계학술대회 논문집
    • /
    • pp.756-760
    • /
    • 1997
  • In this research, the automatic level measurement system used in land leveling was developed. By using a laser transmitter and a receiver as measuring equipments, level was measured automatically. The driving part of this system was composed of stepping motor, timing belt and pulley. It drived the laser receiver to track laser beam generated form the laser transmitter. The level measuring experiments were performed about three level change shapes (step, random, sine). This system could measure step level change of which amplitude was 40mm in 0.5s, random level change within .+-. mm, maximum measurement error. In case of sine level change, experiment was executed with varying the spatial frequency of level change. As a result, this system was able to measure sine level change of which spatial frequency was 0.5m $^{-1}$ accurately.

  • PDF

A Review on the Agri-voltaic and Fence PV System

  • Hasnain, Yousuf;Lee, Koo;Young Hyun, Cho
    • Current Photovoltaic Research
    • /
    • 제10권4호
    • /
    • pp.116-120
    • /
    • 2022
  • Solar energy is rapidly being utilized to generate power in Europe and other countries, but the environmental effect of building and operating solar farms is not fully understood. The building of a solar park demands the removal of certain vegetation and the leveling of the land. Solar energy infrastructure may involve considerable landscape change, altering soil biological processes and influencing hydrologic, carbon and vegetative dynamics. To rebuild the solar PV facilities soils, inherent plant fields might require to be re-established. Within the scope of this research, we presented an analysis of the effects that were caused by the solar farm.

정밀 지오이드 및 조석모델을 활용한 안면도 지역의 높이기준면 변환 연구 (Height Datum Transformation using Precise Geoid and Tidal Model in the area of Anmyeon Island)

  • 노재영;이동하;서용철
    • 대한공간정보학회지
    • /
    • 제24권1호
    • /
    • pp.109-119
    • /
    • 2016
  • 현재 우리나라의 국가수직체계는 육상과 해상에서 서로 다른 높이기준면을 채용하고 있어, 국가 전체에 걸쳐 일관되고, 정확한 높이정보를 취득하기 어려운 문제가 있다. 이에 따라 본 연구에서는 정밀한 지오이드모델과 조석관측자료를 활용하여 육상과 해상 높이기준면에 따라 별도 구축된 공간정보를 단일한 높이기준면 상으로 변환할 수 있는 효율적인 방안을 제시하고자 하였다. 이를 위해 연구의 대상지역으로 안면도 일원을 선정하고, 연구대상지역에 대한 육상 및 해상 높이기준면 기반의 정밀지오이드모델을 각각 개발하였다. 지오이드모델 개발은 R-R 기법을 통한 중력지오이드모델 계산 후 대상지역 내 BM 및 TBM에 대하여 수행된 총 15점의 GPS/Leveling 자료를 이용하여 육상 및 해상 기준 합성지오이드모델로 적합(fitting)하였다. 최종적으로 개발된 두 합성지오이드모델 간의 편차를 계산하여 인천만 평균해면(IMSL)과 지역별 평균해면에서 지역별 약최고고위면(AHHW)과 약최저저조면(DL) 간의 변환에는 국립해양조사원에서 개발한 조석보정체계(TideBed System)의 등조차모델을 지오이드모델과 동일한 격자간격으로 재격자화하여 적용하였다. 본 연구를 통해 개발된 안면도 지역의 높이기준면 변환 모델의 정확도는 약 ${\pm}3cm$ 정도로 분석되었다. 향후 본 연구 결과의 활용 시 다양한 높이측량 성과들을 인천만 평균해면 혹은 지역별 조석기준면 상 높이로 간편 정확하게 변환할 수 있어, 육 해상 높이기준면에 따라 개별적으로 구축된 공간정보의 연계 시 높이 불일치로 인한 혼란과 공간정보를 활용한 연안지역 개발 및 해양방재 수행 시 경제적, 시간적 손실을 최소화할 수 있을 것으로 기대된다.

항만공사용 수중건설로봇의 기구설계 및 제어에 관한 연구 (Study on the design and the control of an underwater construction robot for port construction)

  • 김태성;김치효;이민기
    • 한국항해항만학회지
    • /
    • 제39권3호
    • /
    • pp.253-260
    • /
    • 2015
  • 열악한 작업환경 때문에 수중항만공사를 기계화하려는 많은 노력들이 시도되고 있다. 본 논문은 수중항만공사 중 사석 고르기 작업을 수행하는 수중건설로봇에 대해 기술한다. 로봇의 블레이드는 울퉁불퉁한 지형에서도 사석 마운드를 기준면에 대해 평편하게 고르고, 다목적암은 사석을 파고, 채울 수 있게 설계되었다. 본 연구는 로봇에 설치된 위치 및 방위 센서와 동기를 이루면서 주행과 스윙운동이 포함된 다목적암과 블레이드의 기구학을 해석한다. 기준수심센서에 부여된 월드좌표에 대해서 블레이드와 다목적암의 위치와 방위를 나타내고, 기준면과 나란한 고르기 작업을 위한 형상을 찾는다. 고르기 작업을 위한 유압제어시스템을 개발하며, 로봇에 의한 육상 및 수중 사석 고르기 작업을 실시해 실험결과를 보인다. 로봇의 작업속도는 잠수부보다 8배 정도 빠르며 작업품질도 우수한 것으로 평가된다. 잠수부가 작업할 수 없는 대수심에서는 효율성이 더 좋을 것으로 기대된다.

정밀 지오이드 구축을 위한 자료처리의 최적 변수 결정 (Determination of the Optimal Parameters in Data Processing for the Precision Geoid Construction)

  • 이지선;권재현
    • Spatial Information Research
    • /
    • 제17권3호
    • /
    • pp.397-404
    • /
    • 2009
  • 기존의 우리나라 지상중력자료는 자료의 분포 및 정밀도에 있어서 문제점을 가지고 있었고 이러한 문제를 해결하기 위하여 2008년 항공중력측정을 통하여 정밀도 1.56mGal의 항공중력자료를 확보한 바 있다. 그러나 항공중력자료는 비행고도 상에서 획득된 값으로 기존의 지상중력자료 및 해상중력자료와 병합하기 위해서는 지표면 상의 값으로 환산되어야 한다. 또한 다양한 자료를 융합하여 정밀한 지오이드를 계산하기 위해서는 Stokes' 적분반경, Stokes' kernel 및 지형 효과 계산 반경 등의 많은 변수들을 최적으로 고려하여야 한다. 본 연구에서는 지상 및 항공중력자료의 분포 및 특성을 고려하여 보다 정밀한 지오이드 결정을 위한 최적의 매개변수들을 결정하고자 하였다. 선정된 최적 변수들을 적용하여 지오이드를 계산한 결과, 항공중력 및 지상중력 기반의 두 지오이드는 평균 -16.95cm, 표준편차 ${\pm}8.50cm$의 차이를 나타내었는데, 이는 지상 및 항공중력자료의 분포와 지상중력자료에 포함된 오차에 기인한 것으로 판단된다. 향후 본 연구에서 고려한 매개변수 외에도 다양한 하향연속 방법, 지형효과 계산 방법이 지오이드에 미치는 효과와 추가적으로 확보한 중력 및 GPS/Leveling 자료, 해상중력자료를 포함하였을 때의 효과에 대한 연구도 진행되어야 할 것이다.

  • PDF

기계화를 전제로 한 산간경사지답경지정리방안에 관한 연구(II) (A Study on the Methodology of Land-Consolidation Sloping Paddies in land Vallry for the Farm-Mechanization (II))

  • 황은
    • 한국농공학회지
    • /
    • 제24권4호
    • /
    • pp.57-68
    • /
    • 1982
  • The paddy fiels slope located in Kangweon province Hwyongsung gun Gonggeun myon Shinchonri was considerably steep and so it was impossible to economically consolidate the field up to date. But for the porpose of farm mechanization, the field (32. 27ha) was consolidated by the auther under the assitance of the Ministry of Agriculture and Fishery and,;the Administration of Kangweon province. This paddy field consolidation was caused by the treatise on "Land-consolidation methods for farm mechanization in the steep-sloped paddy field", of which the auther is the same. The constrution was carried out from September, 1981 to April, 1982. During the 4esign and construction, some Peculiarities were found and discussed. That is, in design, besides the common condititions for a design, some special conditions were considered and written below; (1) The ranges of field slope in this design were 1/100-1/30. (2) Long sides of the land readjustment blocks must be arranged abreast contour line, and so they make the amount of cutting and banking decreased so as to take the maximum advantage of the configuration of the field. (3) In design, the main principles of dividing blocks were written below; i) First of all, long side of a block should be drawn straight abreast a contour line. ii) Long side of a block should arrange abreast contour line and make its length 100-150m, if not, l)reak the side in order to make a bended rectangle. iii) Length of a short side should be determinded within differences of elevation (0.6 -1. 2m) between the two adjacent blocks toward the normal to a contour line. iv) Length of a short side should be above 15m and the ratio of long and short side should be slso kept 1: (4-6). v) A new field surface leveling was determinded from the elevation which produce the least amount of cuttingand banking within the range of 0.6-1. 2m diffe rences of elevation between the two adjacent blocks. vi) In the course of dividing blocks with the same width along the line which was normal to a contour line, all blocks connot keep their shape in a retangle because of steep slope of the field and so on, and so it was also necessory to make some non-retanglar and small blocks such as a trianglar or trapezoidal shape, which was impossible to use some of farm machinery. But because this non-rectanglar and small blocks were divided, larger and many rectanglar blocks can be divided and construction cost can also be lowered. According to the conditions discussed above, the paddy field consolidation project designed and constructed. And the results of this study were obtained as below; (1) Three-forth of total cost of this paddy field consolidation was not construction cost, and these cost consist of land grading (1/4), road and canal construction cost (1/4) and the other cost (1/4) such as surveying or materials and 56 on. (2) The steeper the land slope, the greater cost was assigned for road and canal construction, and than land grading. (3) Curtailment of the road and canal construction cost depended on simplificating their strutures. (4) In the case of the land slopes were low, the land grading cost was high by 1: 1.4 in comparison with the road and canal construction cost, and conversely when the slops were steep, the road and canal construction cost was high by 1 : 5 in compa- rison with the land grading cost. (5) The densities of irrigation canal, drainage canal and trunk and branch road were 150. Sm/ha, 60. im/ha and 17. 4m/ha respectively. The density of irrigation canal of the area was high by 2 times in comparison with the average one of Kangweon Province, and the others were nearly the same. (6) Most farmers (above 85%) knew the effects of paddy field consolidation. The effects are; 1) Improvement of irrigation 2) Improvement of farm management 3) Improvement of transportarion 4) farm mechanization and 5) grouping of the scattered land. And the more farm modernization was accomplished by these projects, the more farmers wanted to live in their land. (7) In spite of the very steep sloped paddy field, the diminution rate of the net farm land caused by consolidation was 7.7% which was nearly the same as the one of Chulweon plain of Kangweon province. Land grading cost was 971, OOOwon/ha which was rather cheap by 13.2% than the one of Ghulweon plain, and unit construction cost was 5, 341, OOOwon/ha (included soil addition) which was also nearly the same as the one of Chulweon plain and FNFIA (The federation of national farmland improvement association).

  • PDF

3차원 영상취득에 의한 매장문화재의 효율적 측정기법 (The Efficient Measurement Method of Buried Heritage by 3D Image Acquisition)

  • 이계동;이재기;정성혁
    • 한국측량학회지
    • /
    • 제25권2호
    • /
    • pp.157-163
    • /
    • 2007
  • 최근 국가의 산업화가 가속되고 사회 간접시설의 요구가 높아지면서 대형 건설 공사를 진행하기 앞서 공사지역내에 존재하고 있는 매장문화재에 대한 광범위한 조사가 실시되고 있다. 매장문화재는 오랜 시간 땅속에 묻혀 있었기 때문에 그 성격을 밝히고, 기록보존하기 위하여 정밀한 조사와 일정한 연구절차가 필요하다. 지금까지 유적지의 측량방법으로는 수준측량, 토탈스테이션 측량, 전문 작업자가 직접 손으로 스케치하는 과정으로 현황도 및 종횡단도를 제작하고 있다. 따라서, 본 연구에서는 기존의 유적 측량 및 도면제작 방법이 가지고 있던 문제점을 해결하기 위하여 일반 디지털 카메라를 이용하여 경제적이며, 신속하게 대상물의 스테레오 영상을 취득하고, 디지틸 지상사진측량기법에 의한 3차원 영상모형을 구축하는 기법을 제시하고, 유적 현장입지를 입체적 사실적으로 표현하는데 연구의 목적이 있다.

인공위성 영상레이더를 이용한 멕시코시티 시계열 지반침하 관측 (Monitoring of a Time-series of Land Subsidence in Mexico City Using Space-based Synthetic Aperture Radar Observations)

  • 주정헌;홍상훈
    • 대한원격탐사학회지
    • /
    • 제37권6_1호
    • /
    • pp.1657-1667
    • /
    • 2021
  • 지반침하는 인위적인 인간 활동 또는 자연적 현상에 의해 지표면이 가라앉는 현상이다. 멕시코시티는 전세계에서 가장 심각한 지반침하가 발생하는 지역 중 하나로 평가받고 있다. 멕시코시티 지반침하의 원인은 과도한 지하수 채취로서 해당 지역 전체의 물 사용량의 약 70%를 지하수가 차지하고 있다. 범 지구 위성 항법 시스템(Global Navigation Satellite System, GNSS) 또는 수준측량과 같은 전통적인 현장 관측 방법은 지반침하를 정확하게 측정하기 위해 선호되어 왔다. 하지만 GNSS 관측은 매우 높은 시간해상도를 가진 정확한 지표 변위량을 측정할 수 있음에도 불구하고, 넓은 지역에 대한 부분적인 관측 정보를 제공하고 많은 시간과 비용이 요구되는 한계점이 존재한다. 그러나, 인공위성 영상레이더(Synthetic Aperture Radar, SAR)는 주야 조건과 기상상태에 관계없이 높은 공간 해상도의 지표변화 정보를 mm에서 cm 크기의 정밀도로 비교적 낮은 비용으로 관측할 수 있다는 점에서 효과적인 방법으로 제시되고 있다. 본 연구에서는 2007년 2월 11일에서 2011년 2월 22일까지 획득된 ALOS PALSAR L-band 영상레이더를 이용하여 멕시코시티의 지반 침하 시계열을 추정하였다. 본 연구에서는 대표적인 시계열 분석 방법인 고정 산란체 위상간섭기법(persistent scatterer interferometry, PSI)과 small baseline subset (SBAS)을 적용하여 지표 변위의 시계열 결과를 획득하였으며 대기 효과 및 지형 오차를 제거하였다. PSI 및 SBAS 기법을 이용한 분석 결과 최대 지반침하 속도는 각각 -29.5 cm/year, -27.0 cm/year로 나타났다. 또한 연구지역을 지질 공학적 특성에 따라 세 가지 구역으로 분류하여 각 분류에서의 지반 침하속도를 비교한 결과, 단단한 기반암으로 구성된 지역에 비해 압축률이 큰 호수성 퇴적물로 구성된 지역에서 침하가 크게 발생하였다.